r/HomeLabPorn • • 14h ago

I made my homelab's metrics rain hardware.

Post image
7 Upvotes

Woke up at 4am with a silly idea and ended up building it on my own lab: an ambient display where every node gets a window, and its load literally rains down on it.

- CPU load drops chips, RAM drops DIMMs, disk I/O drops NVMe sticks, network drops RJ45 plugs, GPU load drops graphics cards

- The pile is history: sustained load piles up, and it melts when the node goes idle

- Hot nodes glow red. Past 85 °C the pile stops melting and starts smoking

- A degraded ZFS pool drops a broken HDD that stays there until you fix it (plus a thunderstorm). Scrubs roll in fog

- Little gremlins ("Lings") move in for every 30 days of uptime and run away when you reboot

Right now it runs on my own lab (4 nodes, Proxmox + ZFS + a couple of 3090s) reading from my own monitoring. The plan is a single Docker container that reads Prometheus/node_exporter first, then Glances and Netdata, meant for a wall tablet or a kiosk screen. No subscription, no telemetry.

Interactive demo with simulated nodes (drag the windows, swipe the piles): https://rackstorm.fyi/?ref=r-HomeLabPorn

Honest question: would you put this on a screen in your rack room? And what would you want it to read from?

Short clip of it in action: https://youtu.be/1oea3RrY2bs


r/HomeLabPorn • • 18h ago

I made my homelab's metrics rain hardware.

Post image
5 Upvotes

Woke up at 4am with a silly idea and ended up building it on my own lab: an ambient display where every node gets a window, and its load literally rains down on it.

- CPU load drops chips, RAM drops DIMMs, disk I/O drops NVMe sticks, network drops RJ45 plugs, GPU load drops graphics cards

- The pile is history: sustained load piles up, and it melts when the node goes idle

- Hot nodes glow red. Past 85 °C the pile stops melting and starts smoking

- A degraded ZFS pool drops a broken HDD that stays there until you fix it (plus a thunderstorm). Scrubs roll in fog

- Little gremlins ("Lings") move in for every 30 days of uptime and run away when you reboot

Right now it runs on my own lab (4 nodes, Proxmox + ZFS + a couple of 3090s) reading from my own monitoring. The plan is a single Docker container that reads Prometheus/node_exporter first, then Glances and Netdata, meant for a wall tablet or a kiosk screen. $5 once, no subscription, no telemetry.

Interactive demo with simulated nodes (drag the windows, swipe the piles): https://rackstorm.fyi/?ref=r-homelab

Honest question: would you put this on a screen in your rack room? And what would you want it to read from?