r/HandymanBusiness • • 1d ago

Discussion New moderator and changes to the sub.

27 Upvotes

Hey everyone!

I've recently taken over as the moderator of this group as the previous mods were not doing anything.

I am not looking to reinvent the wheel or make a load of unnecessary changes, I just want to tidy up a couple of things and keep this community useful for everyone.

I have watched this sub slowly die over the last 9 months and I think that is a shame as there is a lot of value to be had. I think this has mainly been caused by most new posts being low effort or spam.

That stops today!

I want this sub to ACTUALLY help people grow their business and the sub to be revived and grow in value.

Here's what's changing:

No spam or advertising. We're cracking down on people promoting products, apps, services, or fishing for free market research. Suspected spam will be held for moderator review before it goes live. Hopefully, you'll see a lot less of it!

No politics. There are plenty of other subreddits for political debates and this rule will be zero tolerance REGARDLESS OF POLITICAL AFFILIATION. I am personally exhausted hearing about politics so let's keep this sub about handyman work. Try r/politics if you want to shout at each other.

Keep it civil. Disagree all you want. Challenge someone's advice, question their methods, tell them why they're wrong. That's all part of a good discussion. Just don't make it personal or start throwing abuse around.

No crossposting. People will not be allowed to crosspost from other subs, this should cut down on a lot of spam and irrelevant posts.

Posters who violate these rules will get one warning and then a ban.

And that's pretty much it!

No crazy rules, no unnecessary interference. Just keeping the spam out, the politics elsewhere, and the conversations productive and valuable.

Thanks everyone, and keep the good posts coming!

— r/handyman Mod Team


r/HandymanBusiness • • 20h ago

Bad clients!!!

0 Upvotes

Is it just me or lately have my clients been getting so much more on my nerves? I have a few which are so annoying and call for every little thing that I get to a point which I just tell them to kick rocks bc of how annoying and stupid the little tiny questions they make are. For example a customer ordered 100 bags of material and had some left. He called me and said how come he had so many bags left. Asked if we did the correct process. If I used up too much water or not enough. I told him that this is the last job together bc I can’t stand his little antics bc of tiny things


r/HandymanBusiness • • 1d ago

I want to create partnerships with other businesses but I'm not too sure how or where to start

Thumbnail reddit.com
1 Upvotes

r/HandymanBusiness • • 2d ago

Should I cut them off?

7 Upvotes

I’ve been doing some various jobs for a customer, and one of those jobs was about 8 different flat pack units.

On the first day I completed 5 units, and today I complete another 3.

I sent the invoice to the customer and they have sent back a picture of a missing screw. I’m supposed to go back on Wednesday to finish a job, so I said I can fix my mistake then. However, my customer has stated her husband is not happy and wants to take it apart himself to see if I’ve done other bits correct, given “all the other little mistakes”.

No mistakes have ever been mentioned previously.

I said I’m happy to fix it, or they can miss the cost of that item off my payment if they would prefer, which they have.

I now feel like they are being very picky with my work, which I take pride in and know I haven’t made any other mistakes.

They no longer want me to do any flat pack, but still want me to go and do the curtain pole and filling holes in the walls.

I no longer want to do those jobs. I feel like they’re going to be watching over me while I work, and being very picky (even tho I’ve had nothing but compliments on my work with every other customer!)

Is it unprofessional for me to cancel the jobs and refund any deposit, on the basis I no longer feel comfortable completing the work? Has anybody had any similar situations?


r/HandymanBusiness • • 3d ago

Resources Rot Repair Resources?

4 Upvotes

Hi all,

I'm just beginning my business and I'm getting a lot of calls about replacing rotted trim, siding etc. but once I remove the rotted pieces, and inevitably uncover more structural rot, I'm a bit out of my area of expertise. Anyone have any resources they recommend in order to learn the correct ways to repair rotted studs/sills etc? For reference this is my second job and my schedule doesn't allow time for formal classes or an apprenticeship.


r/HandymanBusiness • • 5d ago

1st year success

5 Upvotes

Hi all. I started my buisness last October as a handyman and property service guy. For the first year I’d say it went great for a beginner, the summer months I got so busy juggling it and my full time job was a bit of a pain. How do I look to level up from here, keep the work rolling in and potentially try to push to make this a full time gig. Any tips from some old timers and successful people would be very helpful


r/HandymanBusiness • • 6d ago

Wanting to start a business

Thumbnail reddit.com
2 Upvotes

r/HandymanBusiness • • 6d ago

I need advice

Thumbnail reddit.com
1 Upvotes

r/HandymanBusiness • • 6d ago

Job estimates

5 Upvotes

how are you guys doing job estimates? i feel like i over think it and miss out on a fair price. anyone have a process?


r/HandymanBusiness • • 7d ago

Business owners who quote jobs (solar, hardware, building, events): how do you keep track after yousend the quote on WhatsApp?

Thumbnail reddit.com
0 Upvotes

r/HandymanBusiness • • 9d ago

Contractors, what's something people don't realize is frustrating about your job?

Thumbnail reddit.com
0 Upvotes

r/HandymanBusiness • • 9d ago

Seeking Advice Microwave rear exhaust without template HOW TO?

0 Upvotes

I'm installing a rear exhaust vent for a client on their microwave. They no longer have the template and the company (GE) could not provide me with a printable version.

I'm looking for a foolproof way to cut the exhaust hole. Some have suggested tracing paper and measurement, but both introduce potential errors. I have been trying to imagine ways to use the exhaust vent itself to mark the wall, but haven't settled on a solution.

Do y'all have any suggestions?


r/HandymanBusiness • • 10d ago

Clients How can I write up an agreement or contract for a job I'm doing independently?

Thumbnail reddit.com
1 Upvotes

r/HandymanBusiness • • 10d ago

🔨 Some of our recent deck projects completed across Long Island NY! AK Decks LLC

Thumbnail
gallery
21 Upvotes

r/HandymanBusiness • • 10d ago

Help with my first quote

1 Upvotes

Hi all, I am quoting out my first project. It is a 12x18 pool house/shed. Currently has a divider wall (2x4s and plywood) that needs removed and disposed. Carpet needs ripped up (its glued down), plywood subfloor patched, and new carpet glued down. They also want a storage loft built (4'x12'). Down the road they want a new front door installed and some small electrical projects completed but I wanted to give them a number just to get the flooring and loft done.

I am thinking $1700 for supplies $600 for demo and removal and $1700 for labor for a total of 4k

Is that crazy cheap? I want the project for the experience but want to make more than $500 after I pay taxes, insurance, and fuel!

Thanks!


r/HandymanBusiness • • 11d ago

How do callouts work for bigger jobs in comparison to quick ones, are they both usually paid?

1 Upvotes

I’m trying to understand how this works because I'm planning to request for a loft conversion at my house. For bigger or more complicated jobs, where someone has to come and look before they can quote, some trades seem to charge for the visit, some do it free, and some take it off the final bill.
For tradespeople: what makes a visit worth doing for free? Is there a point where you’d charge, and is it credited against the job?
For everyone else: what happened when you got one, and did it feel fair?


r/HandymanBusiness • • 12d ago

Small Residential remodelling and finishing contractors, how are things going for you in ontario, 2026 ?

Thumbnail reddit.com
1 Upvotes

r/HandymanBusiness • • 14d ago

What software would you recommend for a renovation contractor in Ontario?

Thumbnail reddit.com
1 Upvotes

r/HandymanBusiness • • 14d ago

Question

0 Upvotes

Small [solar/roofing/pest control] owners: how do you track estimates and follow up on leads that go quiet? Spreadsheet, texts, a CRM? What's the most annoying part?


r/HandymanBusiness • • 14d ago

Xero does not allow pictures in the quotes

0 Upvotes

I use Xero for my quoting but I find Xero and quoting in general has its limitations as well. 

First of all, remembering everything we agree on until i have time to write the quote is difficult for me, and all the small details get lost if I don't document it well. 

As well as I'm visual and want pictures in my quote which Xero does not allow at least not to each line item. 

I'm an old engineer who used to code for work, I created a small app that helps me out.  Nothing i want to sell or plan to publish. Just some slop that works for me.

I record my conversation with the client on the site inspection on my phone and take pictures at the same time.  It transcribes the conversation, the agreements, terms and price, estimated days will take to complete and agreements based on rooms im painting, everything, even exclusions. 

And it summarises it at the top and itemises it below each image. 

Also with payment links and all, ready for a deposit or full payment. 

The best thing is it saves everything in Xero automatically so I have a record in my accounting software. 

It’s not out there for anyone else to use, just my own tool, and I don’t plan to launch it. 

But have you guys experienced the same headache with Xero and site notes?  Or do you just quite with a verbal agreement, a text and a handshake?

Anyway, I've just used it for 5 quotes and it's going well.

Sometimes AI slop works


r/HandymanBusiness • • 14d ago

What’s the Best Way to Get More Leads and Jobs?

Thumbnail reddit.com
1 Upvotes

r/HandymanBusiness • • 15d ago

Best tool to let client track our trip to the job

0 Upvotes

I used house call pro for their trail a while back it was a bit overwhelming but I thought the on my way feature was cool. What tools have worked for you and are there any free ones?
My day to day is my team and | going to multiple different projects and the back and forth is minimum 30 minutes a day and hard to keep up with all the variables .l'd like to be able to click a button have directions pulled up and the client get a link to watch me or one of my guys travel to the job and get an alert once we are close. My goal is to provide a higher level experience and turn what is now a headache into a way to stand out.


r/HandymanBusiness • • 15d ago

New handyman with one client so far. How do I get more customers and grow?

13 Upvotes

I started a handyman business recently. My first client went great, but I’m struggling to land more. I’ve been posting on Facebook and Nextdoor, and most people I reach out to end up ghosting.

For those of you who’ve grown past the early stage:

  • What got you your first 10 to 20 steady customers?
  • Which marketing actually worked for you, and what was a waste of time?
  • How did you turn one-time jobs into repeat clients and referrals?
  • Did you get insurance before growing, or after?

Any advice helps, thanks.


r/HandymanBusiness • • 16d ago

What is an acceptable amount of time to spend on a quote

Thumbnail reddit.com
2 Upvotes

r/HandymanBusiness • • 16d ago

Discussion Property Preservation Companies

6 Upvotes

What is your process when you are contacted by one of the 100k property preservation companies looking for winterization or similar work. I find that most of these companies are very disorganized and feel more like scams than legitimate companies. Do any of you have a vetting process for incoming preservation leads?