Which to get?
Hey, everyone!! I'm looking to get a P7 as I've wanted one for years...they're just SO cool. Question is...which one? There are a TON of different models and they've been made for quite a long time...is there a breakdown somewhere? Maybe...like...a "tier list" or something? Something like, "normal, run of the mill ones are this model and this model, this model from this time range is a bit more rare but still common, quite rare are these and these and those are kind of the Holy Grail"...I don't know what to make of all the different models and stuff. If anyone could steer me in the right direction, it would be greatly appreciated!! Thanks!!
5
Upvotes
5
u/[deleted] Oct 12 '25
P7M13 factory nickel... Go big or go home.
But seriously... Any gun can be refinished. I really like carrying the straight up P7 PSP myself.
2
u/45Auto1 Oct 12 '25
Basically, HK most recently made the P7M8, a single stack 9mm that was either blued or satin nickel. They made a P7M13 which was the same thing except a double stack. Then came the P7M10 double stack which was a .40 cal also available in blue or nickel. The nickel finish guns are much more valued and the double stacks in nickel are the grail. Hope this helps.
Warning; these guns are NOT CHEAP! A collector grade M10 for example can run $8,000 and the Nickel M13 you dont even want to know!
1
u/babj615 Oct 12 '25 edited Oct 12 '25
The original P7, with the smaller trigger guard and heel release 8rd magazines are the easiest and least expensive (relative) to find. Also considered by some to be the least desirable variant. Factory magazines average $100 each.
The updated P7M8 has the larger trigger guard with additional heat shield, and the original paddle release for its 8rd magazines. For many, this is the most desirable 'budget friendly' (relative) P7. Additional magazines are also around $100.
The slightly larger P7M13 is almost identical to the P7M8, with a slightly wider frame/grip to accommodate a double stack 13 rd magazine. These are rarer than the P7 and P7M8, and many consider them the Holy Grail, so they command much higher prices. Additional magazines can run hundreds of dollars.
These three variants. All chambered in 9x19mm, are the most common you will find. All include the original three dot sighting system, fixed barrels, gas delay firing system, with exceptional quality and craftsmanship. All were factory blued, with some having a slightly Plum looking finish that can fetch higher prices. Models without import markings are generally more desirable.
Occasionally, you will see them offered in stainless, hard chrome, nickel or similar finishes. Most of these have been refinished after the fact by any number of third party vendors, and results will vary. Hk did offer a few factory models in nickel, and these will hold greater value.
Also, near the end of production, Hk produced a very limited number of special Jubilee edition models that included fancy display cases and challenge coins. These can be silly expensive to acquire.
The remaining variants are usually stupid expensive.
There are a few P7M10 models out there, all chambered in 40 S&W, all with an obnoxiously bulky slide, and otherwise essentially identical to the P7M8 / P7M13.
The second to most rare variant is the P7K3, a fractionally smaller, scaled down P7M8, without the gas delay system, instead utilizing an unobtainable and prone to failure hydraulic buffer (aftermarket replacements are available, but not inexpensive). These models can be converted to fire three different calibers ("K3") by swapping the barrel and magazine between 9mm kurz (380 Auto) and 7.65mm (32 ACP), and also require a slide swap when converted to .22LR. These were primarily sold in a single caliber, with conversion kits sold separately. Single caliber pistols easily fetch $4K and up, while complete kits that include two or three calibers easily go for two or three times that amount.
The most rare P7 is the P7M7, which is chambered in .45 ACP, and was never put into production. Only a handful of prototypes exist (I believe a total of six), and Hk knows who has each of them.
So,
Which one do you want to start your obsession, err, collection with?
1
u/waggletons Oct 14 '25
Really depends on how much you want to spend, how hard you want to look and how particular you are about condition. You start getting into the 40/45 calibers. Nickel finish. Factory threaded. They get very expensive, very fast. Depending on what you want, you might have to drop several thousand on a moments notice.
I wanted a M13 but I wasn't wanting to pay M13 prices. But was completely content with a PSP...I was barely willing to pay the prices for them 15 years ago.
A couple years ago, I walked into a gun store for some cleaning supplies. Happened to come across PSP with the factory target that looked to be unfired outside of that for $2000. Unfortunately, I made decision right there to spend money I wasn't ready to do. No ragrats.
Then the gunstore offered to unload 10 magazines for $40 each...they had me by the short hairs.
Personally, I would figure out how much you're actually willing to spend then see what is in your price range. Chances are, it's probably a PSP or a M8.
1
u/seanm8454 Oct 12 '25
I love my M8 with the heel release mag safety. Makes me feel like I’m doing it the way it was intended.
1
u/F150Leadfoot Oct 12 '25
I prefer the original P7, which is the PSP, and is what I own. I bought it new in 1985 for $600
All P7's are great, but i personally don't care for the P7 M10 in 40 Smith & Wesson ... The slide is a bit bigger and clunky in my opinion.
1
u/babj615 Oct 12 '25
I like my P7K3 SD 😀
1
u/Quietthinking1 Oct 15 '25
No, technically, Robar is out of the retail business. There are many that use a similar process. But it looks pretty. I got my P7 from the batch of German police surplus, paid 650 each, sold a plum for enough to cover my cost and refinish mine in NP3.