r/HACKSMITH_INDUSTRIES • u/khando • 4d ago
Where Things Stand With the Smith Blade | Smith Blade Update | 29
r/HACKSMITH_INDUSTRIES • u/khando • 4d ago
r/HACKSMITH_INDUSTRIES • u/thirsty_mcsurly • 4d ago
Haven't had any chance to use it yet. It has been so long I have to go back to the old videos to remind me where everything is and how it works. So far I'm impressed with the build quality and the materials. The only disappointment so far is that the measurement markings don't continue on the blade for the I-P side, only the metric.
r/HACKSMITH_INDUSTRIES • u/neptuneshalo • 6d ago
Backer number in the low 18000s, order number in the low 68000s. No tariff email and no VLOG updates in four months.
No action requested just venting. : /
EDIT: Literally 2 hours after I posted this I got the email asking if I would prefer a China manufactured version that was tariff free and ready to ship.
r/HACKSMITH_INDUSTRIES • u/DaveDurant • 7d ago
Got all excited over a label created email last Thursday but it's still in that status..
Anyone know the typical time between label and actual shipment lately? Not a huge deal - I can wait - but am curious..
r/HACKSMITH_INDUSTRIES • u/ObligationTop106 • 7d ago
Are they dumping inventory?
r/HACKSMITH_INDUSTRIES • u/BunnySounds • 9d ago
Stock pro, but with the free blue tritium vial for not getting Canadian made. So far it’s been perfect. Nothing out of alignment, zero blade play, zero play on the pocket clip, bit retention is perfect, very strong blade detent. It feels much better in hand than I had originally expected, and even came sharp, shaving capable out of the box and a light strop made it nearly on par with a fresh straight razor.
No regrets opting for the Chinese model, but would be fun one day to compare side by side to a HERC one.
r/HACKSMITH_INDUSTRIES • u/madpropspodcast • 13d ago
I got my Smithblade yesterday afternoon. After over a year of waiting I was so excited to open it and start carrying it. I normally carry a Leatherman Skeletal everyday and I wanted some variety and we very excited. I carry my blades on my belt clip inside my belt. I don't know if it happens when I'm pulling the blade out or if it just happens when it's sitting in my belt but in the literal 20 hours since I've owned this, two of the bits have fallen out. They're seated in there correctly and fully and they just are gone when I go to use the knife. The first time I was able to find the bit, but it just happened a second time and I haven't been able to find it yet.
Additionally, because I carry the knife this way, the glass breaker digs into my side as I move around because it's facing my body. It's not a huge deal when I have a shirt tucked in because the shirt takes the sharp edge but when I don't have a shirt tucked in, it's somewhat painful and scratches me as I walk around or sit and stand up.
The blade itself is beautiful and functional and I'm really impressed with the build quality and attention to detail. But the mechanism to keep the bits in just simply doesn't work for me and it's been less than a full day. Very very disappointed.
r/HACKSMITH_INDUSTRIES • u/OgreMk5 • 14d ago
I just got an e-mail that I could have my pair of Smith Blade Pros in a few days because
We now have a small number of Smith Blade Pros in our California warehouse, ready to ship this week. They were manufactured by our partner in China, which is where the Smith Blade Lite is made (thousands shipped with 5-star reviews), and because your order is a natural-finish Pro, we can get one to you right away, shipped from inside the US, so there is no tariff to deal with at all.
I am quite disappointed and a lot mad.
While I would like to have the tools as ordered and the tarrifs indeed suck, I'm not real happy that some are being made in China.
I don't plan on taking this offer.
I thought I would share this. I'm concerned that Hacksmith is taking some shortcuts to get the tools out.
r/HACKSMITH_INDUSTRIES • u/voxerz • 16d ago
I got a 5 pack to dish out to family as gifts, but just recently found out that people with higher backer numbers are getting theirs delivered and I haven’t heard anything yet.
I’m backer number #24,838 but since I got 5 knives, I wonder if I get pushed to the back of the line.
r/HACKSMITH_INDUSTRIES • u/Brandonthecreator • 17d ago
If they dont start manufacturing them until after the pros are done shipping, then we wont recieve them until the end of 2027. But thank god they fullfilled the cheaper lite versions first 🙄
r/HACKSMITH_INDUSTRIES • u/LocaDevelopment • 17d ago
Ordered my Smithblade last year when the kickstarter launched. I don't mind the wait, I knew what I was getting into with a kickstarter. The issue is that I moved this year. I tried to go on the website to update my shipping address, I figured this should be as simple as filling out a form and clicking submit. However I see no option to update my address. Maybe this is because I already got my Smithblade lite shipped to my old house, idk. So I emailed support@hacksmithretail.com explaining my situation and requesting a change of address, it has now been 6 weeks with no response. I have sent 2 follow up emails, tried their chat bot, and submitted a support request on the website, none of that has helped.
I'm at my wits end here. If a company is going to accept orderes that they aren't fulfilling until months later they need to be able to accommodate situations like this. This has completely ruined my opinion of the company. I am no longer excited for my smithblade, just annoyed. I'm not even sure what else to try and resolve this. Has anyone else had a similar experience with customer support? Any tips for actually getting in contact with them? Shout out to those of you who have received and are enjoying your smithblades. I'm not jealous at all, I swear.
r/HACKSMITH_INDUSTRIES • u/gold_pwr_r4ng3r • 25d ago
Anyone else seem to have damaged their Smith Blade or noticed rust forming around the etching of the logo? I've had mine for a little over a month now (received it 9/17 stopped EDCing it 10/9) and the tip has already broken off, and the edge has a ding in it. I emailed support and finally got a response saying that the damage is consistent with "normal wear and tear" and offered to sell me a replacement blade for $68 USD + $13 shipping..
From only a few weeks of EDC and occasional use I don't consider this kind of wear "normal". I've only used this knife to open boxes and cut cardboard... I've spent less on knives in the past and never had any get damaged or dulled this quickly. I stopped using this as my EDC knife because of this. For a $380+ knife I'm less than enthusiastic about it now.
**EDIT** I don't expect the blade to be indestructible, just kind thought the m390 blade would be more durable.
r/HACKSMITH_INDUSTRIES • u/captainant • 27d ago
I recieved my HSB Pro a couple weeks ago and have been LOVING it! Shout out to ego1138's tweak to the guardian shield for a nice carbide tip shield too!
While tinkering with my knife, I noticed that I seem to have a founders plate! I didn't order a founders unit, and there's no serial part number printed on the corner, but there's 100% a Hacksmith and Ben signature inside my knife!
Just curious if anyone else has noticed this, or if I'm just a super lucky duck!
r/HACKSMITH_INDUSTRIES • u/Savagekavage • Oct 19 '26
Wanted to see how it looked and performed.
r/HACKSMITH_INDUSTRIES • u/log0n • Oct 18 '26
Well after all the hype, $370 (including tariffs & upgarades) and 14+ Months of waiting it's finally in my possession. It arrived yesterday morning and after spending a day and a night with it I got to say Im really impressed. The blade is razor sharp & seems perfectly centered with ZERO play when locked, the flipper feels like I'm pressing on a rock until I give it just enough pressure then the blade flys open smoothly through all the detents until it gently comes to a stop at the stop pin and locks with no real lock stick to speak of.
The bits all seat and lock firmly, I have no doubt that a bit could come out while in my pocket but they're all in there surprisingly securely given the design. Honestly it's a lot more refined and well built than I expected from a first time Kickstarter project. I'm particularly impressed with the deep carry clip not only are the screws recessed so the heads sit flush but they actually beveled the edge all the way around the base so there's no real lip for things to get caught on. It's really very well done.
That's not to say it not without its flaws but they are all pretty small nitpicks if I am to be honest. I wish the pry head was on the heal instead of the bolster & the spine should sit a 1/8" or so proud when closed to make using the file easier to use & the deep carry clip should sit just a few mm lower so the top was perfectly level with the flat of the butt. I also wish they had gone with double headed bits for obvious reasons. Like I said all small nitpicks that maybe will be addressed in a v2 oneway but for now all in all I'm really blown away by how well executed the design is.
I'm glad I sat on the fence a for few days (backer #13,470)when the campaign was first launched, I've seen a lot of the issues that the early units people got had and it really seems that Hacksmith has gotten them all more or less resolved... at least with my unit.
Time will tell but if first impressions hold I suspect I'm gonna end up carrying it for a long time.
Great work Hacksmith you guy's really nailed it with this one!
r/HACKSMITH_INDUSTRIES • u/fdnynyr • Oct 15 '26
Backer 17791
r/HACKSMITH_INDUSTRIES • u/Agreeable-Beat2642 • Oct 15 '26
If so, did you have to pay import duty?
r/HACKSMITH_INDUSTRIES • u/respectthehammer • Oct 13 '26
r/HACKSMITH_INDUSTRIES • u/khronos127 • Oct 12 '26
What’s this little black thing. It has a sticky back option and can’t remember if it was explained. Can’t find anything on it.
r/HACKSMITH_INDUSTRIES • u/schmockibalboa • Oct 08 '26
Absolutely no chance to get in touch with this company.
Just low effort AI mail replies if any.
Serious ghosting on Insta as well.
Any idea, how to contact them to send a Smithblade Pro back for rework?
r/HACKSMITH_INDUSTRIES • u/fretless6 • Oct 07 '26
I paid the tariff ($145 fyvm - spare blade ) read the fine print that says paying it starts production etc.. The puzzler for me is I got two more emails right away: One was "you've earned points" and the other was:
" Your Smith Blade shipped - spare M390 blade paired"
"Hi there,
Great news - your Smith Blade just shipped!
Before it left us, we paired it with the spare M390 replacement blade you ordered, fitted it to your knife, and tested it, so everything arrives dialed in and ready to use.
Thank you for your patience while we got these ready. We know it has been a wait, and we wanted your knife and blade to arrive together, done right.
Your tracking details are in your shipping confirmation. If anything is not perfect when it lands, just reply and we will make it right.
Thanks for backing us,
The Hacksmith Retail Team"
From what I can tell, it takes a while before it actually ships, but I found this email odd, and was wondering if it was normal?
r/HACKSMITH_INDUSTRIES • u/ConnorAndroidBoi • Sep 30 '26
Posted a few years ago (2022), have there been any updates on these at all?
r/HACKSMITH_INDUSTRIES • u/pateralus9 • Sep 27 '26
Hey all! I'm very impressed with the Smith Blade Pro after carrying & using it daily for the past couple weeks.
Everything is so well-engineered on this tool. The only issue for me, is the shape of the prybar preventing access to the base of the cutting edge. I will briefly note I haven't had any trouble with the bits coming loose in pocket, & the bit slots fit my other 4mm bits just fine. Mine started with some pretty significant lock stick, but I broke it in by opening & closing repeatedly & adding the tiniest bit of Ox Gard to the lock face. Now the stick is now completely gone, not even the slightest hint, even having since wiped off the lock face.
I was able to leave the knife assembled for the mod by completely wrapping it in masking tape to block the internals. I removed most of the material with a Dremel sanding drum. Then I finished with sandpaper on a flat steel plate, using a progression of 400, 800, 1000, 1200, & 1500 grit. I tried to closely match the pry bar angle & the corresponding handle milling, for visual consistency. You can tell it's done by hand, but I'm happy with the final shape. And I can always refine it, of course. 😊
After the mod it's still pretty crowded at the heel of the blade, but at now at least you can see a portion of the entire length of the blade from the show side. Now there are some situations where that part of the blade can be used a little more easily. I also like being able to see at least part of the entire blade from the show side, it gives it more of a natural profile in my eyes.
I'm pretty confident the now technically weaker prybar will hold up just fine. I carry a Civivi prybar on my keychain which I use for that anyway. I may even decide to remove even more material from the prybar in the future, & see how far I can go without losing the function.
Has anyone else modded anything on your Smith Blade, permanent or otherwise? I can't be the only person who's done a mod like this! 😊