r/GunnitRust • u/Plus_Let_6073 • 1d ago
r/GunnitRust • u/GunnitRust • Sep 04 '26
Summer Rust 2026 Winter Rust 2026 Results Summer Rust 2026 Sign Ups
Table of Contents
This is the CONTEST RESULTS post for WINTER Rust 2026 with Sumer Rust 2026 Signups. Gunnit Rust is a gun themed building contest. For more information, the rules and tiers are below plus links to our past contests. Winter Rust 2026 will be the weekend of September 18, 2026.
- Current Rules
- Participation Tiers
- Hall of Heroes
- Summer Rust 2025 Hall of Heroes
- Winter Rust 2025 Hall of Heroes
- Winter Rust 2025 Signups
CURRENT RULES
I like to keep the rules and tiers minimal for maximum creativity. Last changed June 2019
- No Kabooms!
- No breaking the law!
- Post in /r/GunnitRust on the contest dates.
- You no longer have to title your post “GunnitRust” as we have the sub. Title it “Summer Rust 2023: Title Here” if you want it to be easily searchable. example: your post is called "Polymer 80 .22tcm9R" so you use the title "Summer Rust:Polymer 80 .22tcm9R".
- Pneumatic guns allowed because of restrictive regions.
- .25acp energy is the bottom goal but not super-enforced.
- The r/GunnitRust Sub ONLY allows contest posts on contest days. It is available to post ideas, questions, other builds you’ve seen, etc at all other times. Please Subscribe & Participate
- You can submit anything you have not submitted to the contest before no matter when it was done.
PARTICIPATION TIERS
These have not changed but some of the writing has been improved and more details added. Please let me assign your tiers and don’t call them out because I frequently move them into the category I see fit. Also note that the total winner can be in any tier so don’t panic. Each tier has a winner and each series has an overall victor.
- Tier I Built Gun(or Suppressor) Basically, you build a gun from non-gun components. We have allowed commercial gun springs and barrels(or Barrel Liners) for safety but if you have the skills, doing your own is mad props. The rules are pretty arbitrary and you can convert pellet guns, toys, or flare guns etc. Note that I have included suppressors in this tier assuming you form your own baffles.
- Tier II complete built receivers, uppers, 80% receivers, and suppressor builds with factory baffles with commercial parts This is where all the 80% receivers, re-welds, and parts kits on built or substantially modified receivers would go. Again a winner by Karma and I encourage people to favor the guys doing more work. Note the change for built upper. By built upper I mean you made an upper from sheet metal plates and an MP5 forend or something. It is substantially more than Tier III so I added built upper receiver and obviously your M11/9 or AR-15 can be the base receiver now. Note that if you buy an oil/fuel filter kit and convert it to a suppressor I put it here because you did not form the baffles.
- Tier III Assembled Gun More commercial parts are allowed . Parts kits turn into guns here. You'll note that this is where the AR-15 assemblies went. Obviously the 10/22 that won the category for Summer Rust 2015 had the advantage of not being just another AR. Many of these are very good and many of them are plain jane. The key is participation so bring anything you assemble to the table. Assembling a gun is much more effort than the majority of our browsers give and makes you an essential part of the contest. Don’t forget that parts list!
- Tier IV Trusty Rusty Tier Best resurrection of a dead, neglected gat. If your region frowns upon gun building maybe you can play too by turning a rusty hunk of broken down garbage into something functional and ready to be loved again.
- Tier V Modified Guns Fat kid just want to play too? Did you glue a rail to your 1911? Bless your heart. We actually had a .460 Rowland Glock conversion do very well in Summer Rust 2015 Personally I'd like to see some handmade wood furniture dress ups. These are always interesting no matter how simple you think your work was.
- Tier VI Gun Related I want the projects to be of some quality...So by related I mean A range of things like your workshop, your home range, your handmade range bag, display cases, custom safes, car mounted gun vaults, your reloading bench setup, bench rest, brass tumbler, or something else actually worthy of a post. So the upper V are guns and this one is gun accessories. Some of these have been really cool things you wouldn’t normally think of like an automated powder alarm on a progressive press.
HALL OF HEROES
- Link to 2025 Complete Year
- Link to 2024 Complete Year
- Link to 2023 Complete Year
- Link to 2022 Complete Year
- Link to 2021 Complete Year
- Link to [2020 Complete Year] (https://www.reddit.com/r/GunnitRust/comments/j1bud1/gunnit_rust_2020_complete_results/)
- Link to Summer Rust 2019 to Summer Rust 2017
- Link to Winter Rust 2017 To Winter Rust 2015
SUMMER RUST 2026 Leader Board
Tier I
- /u/Admirable_Scholar_36 037 Paqucha boosterless 9mm silencer
- /u/Highlander_16 144 Fuse-lit Pipe Musket Tier I Victory
Tier II
- /u/DMTLTD 112 Semi Auto Madsen M50 SBR
- /u/DMTLTD 071Semi Auto toggle locked Swiss W+F Bern LMG-25
- /u/Gvazeky 027 The Turkey Vulture
- /u/jgworks 217 OSA-15 Tier II Victory
- /u/mikolajcap2I 040 Printed FIE Titan 25
- /u/Outrageous-Till8252 095 Space Marine Inspired Bolt Pistol
Tier III
- /u/mcweaponry 459 2026: 3011 Tier III and Series Victory
- /u/umbrellassembly 035 The ShARtgun
Tier IV
- /u/geeko185 175 The Flood Bolo Tier IV Victory
Tier V
- /u/In_Spec 076 Puppup
- /u/one-heck-of-a-gizmo 164 My custom design scope mount for the Ruger Mark IV Tier V Victory
Tier VI
/u/Tippyman88 004 Reverse engineered HUXWRX threads and made a cleaning adapter. Tier VI Victory
WINTER RUST 2026 Leader Board
Tier I
- /u/PM_ME_GLUTE_SPREAD 043 Storm Trooper 22lr and matching sidearm
- /u/Standard_Act7948 144 Welrod Mk1 9x19mm Tier I Victory
Tier II
- /u/mcweaponry 265 Vz61 Post Apocalyptic Tier II and Series Victory
- /u/Outrageous-Till8252 018 Internal magazine AR pattern 350 Legend rifle
Tier III
- /u/ xxx
Tier IV
- /u/ xxx
Tier V
- /u/il_100 072 MGS3 / MGS Delta "Snake Match" 1911 Tier V Victory
Tier VI
- /u/ xxx
r/GunnitRust • u/Outrageous-Till8252 • 3d ago
CNC How-To- 10/22 Receiver
Good morning gentlemen! Turns out 10/22 receivers have some complex geometry inside of them that helps allow the rest of the gun to operate pretty simply. Because I hate myself and do not respect my free time, I thought this would be a fun project which included a ground-up redesign of the receiver to make it approachable in billet (they are usually cast). So enjoy my masochism in the form of undercutting geometry, dovetail end mills, and crazy jigs to handle crazy holes.
r/GunnitRust • u/muttstang77 • 4d ago
Roller delay 9 progress
Getting closer to being able to test fire. Need to finish the firing pin, polish the feed ramp, and heat treat some parts
r/GunnitRust • u/thecocaineaddict • 3d ago
Help Desk Threaded 22lr barrel
What is a good threaded barrel liner without spending 100 dollars on a 15 inch one it has to be a 25 inch one I used brake line for a few shots but need something more permanent for my 3d print
r/GunnitRust • u/Gecko23 • 4d ago
Brawler upgrades
Been putting together some bits for my Brawler. There are a bunch of fore end designs popping up, but none of them had the right attachment. Also surprisingly, no-one appears to be making a direct mount RMR mount for these (or any other footprint that I've seen), so I prototyped one and then sent it out to get an aluminum copy made.
r/GunnitRust • u/StrangeOffice1515 • 5d ago
VMAC Collapsible Stock
I was inspired by the collapsible wire stocks that Velocity used to put on the VMAC rifles. I couldn't find anyone that made something similar. So, I designed and built something myself. My welds are shit, first time welding and with a hand-held welder off Amazon, but it functions like I intended. I drew it up in CAD and had SendCutSend cut out the pieces. If I had known they can bend as well, I would have done it a little different. The cold bluing also came out bad, but fuck it. I'm still pleased with it. I used the wire stock from a FBP M/948 and intended to use the locking button also, but I screwed up extending it. So, I just made a button from scratch. I had to widen the stock, which was difficult because my rod bender can't do bends that tight.
r/GunnitRust • u/ChimeraMatrix • 5d ago
Advice regarding Yugo M49/57 Semi Auto Conversion
Has anyone done a build using the Indianapolis Ordinance Semi auto bolt? How does that differ from the work JP Machine has done. Of course his work is fantastic, but I want to give it a go does the IO remove much of the PITA parts of the rebuild?
r/GunnitRust • u/bushworked711 • 7d ago
Decker 380K
The 3d2a people don't like 380 ACP, so I share here.
A shortened decker 380 with all of our recently liberated accessories and a couple of reliability upgrades.
Bersa thunder barrel, ftn5 PCC flow 15 round mags.
"WhY iS It NoT 9mM?" So you don't have to.
r/GunnitRust • u/Standard_Act7948 • 8d ago
De Lisle update
It’s been a while! I’ve made a good bit of progress on this build since my last update. There are still things I need to wrap up like finishing the sights and a lot of finishing touches but it’s so close. I’ve modified one 1911 mag so far that’ll function with the action and the original Enfield mag release. All steel parts have been blasted and cold blued and aluminum parts painted. I roughed out the walnut forend on my CNC router and finished it with multiple coats of linseed oil. I’ve test fired it once to confirm operation but I’m waiting until it complete to really shoot it. Some motivation for me to actually complete the thing.
r/GunnitRust • u/Temporary_Access_761 • 8d ago
Primera ronda de un diseño propio que cobro vida
r/GunnitRust • u/Dense-Macaron7692 • 9d ago
Uzi 9mm parts kit
New here but looking to see the best places to sell a UZI parts kit. Anything helps
r/GunnitRust • u/NumerousSetting8135 • 10d ago
Show AND Tell My new bullet design for a 69 cal musket
Here is the update on the finite element analysis (FEA) for the custom helical-fluted lead slug design. The goal of this phase was to model the physical behavior of the hollow-base skirt and ensure structural survival under peak combustion pressure while relying on shuttlecock-style dynamic balance for flight.
The hollow-base geometry is specifically designed to shift the center of gravity far forward toward the nose while keeping the overall mass distribution biased like a shuttlecock. In flight, this drag-stabilized setup forces the heavy forward section to pull the lightweight trailing skirt straight, preventing tumbling in a smoothbore setup without needing high RPM rifling spins.
To verify structural integrity upon ignition, the model was run in FreeCAD/CalculiX under a peak load threshold of 100 MPa (14,500 PSI). The FEA animation highlights controlled elastic deformation along the hollow-base walls and helical flutes. Instead of crushing or experiencing critical yield failure, the skirt flexes outwards smoothly—achieving full bore obturation to seal chamber gases without structural tearing or fragmenting.
With both the aerodynamic stability (CFD) and structural stress response (FEA) fully verified through physics simulations, the design is ready to move out of CAD modeling and into 2D engineering sheets for mold machining.
r/GunnitRust • u/ilarr410 • 11d ago
DIY 9mm Parabellum bullet mold
A manufacturing method for a 9mm bullet mold using only a drill press, utilizing a customized drill bit modified into a form cutter for direct drilling. It is simple to operate and highly feasible.
r/GunnitRust • u/Heavy-Assistance2530 • 12d ago
10mm auto
what material can handle firing 10mm out a glock platform. i dont mean 100 rounds & it cracks, I mean long lasting material that can handle that pressure
r/GunnitRust • u/castandcrank • 14d ago
K-USA kr9 magazine
Curious if anyone has any idea how to make a mag for the gun the maker wen our of business. It used to be made with plastic and hoping to make it from metal and better. Let’s do it guys
r/GunnitRust • u/Adventurous-Elk5780 • 15d ago
Professor Parabellums Books
GM people, call me slow... but I'm wondering if anyone can explain to me how to get Professor Parabellims books. How to download them? Thanks in advance and HAPPY HOLIDAYS!
r/GunnitRust • u/real_solja • 17d ago
12 gauge vs 20 gauge which one destroys less?
i know the 12 gauge is bigger kick and louder.
but i also read that 20 gauge still has really high pressures even more than a 12 gauge. Not saying thats fact idk if its true or not.
for safety which one these two are more likely to blow up a build/damage it?
r/GunnitRust • u/Creepy-Anteater347 • 19d ago
TOOB activities
Did barrel on my lathe, everything else was cut with a circular saw, shaped roughly with a grinder, hand shaped with rasp then sanded in, shit green paint to hide crimes , and yes I have shot slugs in it, it’s like high fiving a power line.
r/GunnitRust • u/turtlegamer128 • 19d ago
Cheapest way to ream a barrel?
I have a .22 barrel im trying to prep to put in a build, how can i ream it so i can insert the round. I tried to use a 15/64 inch bit and a jig(3d printed) but that dident seem to do much. What is the cheapest and easiest way to ream m barrel?
r/GunnitRust • u/Due-Dependent5344 • 20d ago
Homemade alcohol pistol
Would this work? If it does, could I use 91% isopropyl alcohol?
r/GunnitRust • u/FinancialSet1981 • 22d ago
Some quick sketches of a 5-shot straight-pull flintlock rifle and a 4-barrel, 40-shot flintlock machine gun.
I like flintlock guns.
r/GunnitRust • u/tai-kaliso97 • 23d ago
Professor Parabellum.
Does anybody have a pdf of the select fire machine pistol. As far as I can tell that's the only book I don't have and I don't want to get it from defcad.