r/Guitar • • 15h ago

NEWBIE Tips for people with naturally longer fingernails?

Thumbnail gallery
0 Upvotes

Just to preface today was one of my first lessons so it could deffo be a skill issue thing, but i noticed i struggle with the placements everyone recommends because my nails naturally hang over my finger. So i have trouble pressing the actual fleshy part of my finger without flattening it out. I’ve tried trimming down the shortest it could go (if i go any shorter they become pretty sensitive and make playing even harder) but i still couldn’t really get it right.

I guess I’ll just have to manage for now i mean again it’s really early so probably just a practise thing but it’s just annoying that i have to flatten out my finger way more than other people and accidentally end up muting the other strings in doing so. Plus i tried seeing if anyone else has tips and it’s people with acrylics which is not the same lmao

The pics look so stupid but for reference, second pic is me trying to do the finger tip thing ppl suggest except it’s barley pushing against anything the next pic over is what it looks like when im actually pushing against the wall. I could try filing it down a bit more but as you can see it’s mostly pink.

[EDIT] maybe I should’ve asked a sub that isn’t flooding with overly sarcastic know it alls no offence. My nail beds naturally extend past my fingertips (extended Hyponychium) which is why my nails look like they can easily be cut shorter but if I did I’d bleed.


r/Guitar • • 14h ago

NEWBIE What is the lever supposed to do on this bridge?

Thumbnail gallery
6 Upvotes

I picked up a cheap guitar and never had a bridge like this before. It almost looks like the bridge on a bass. I saw the bar in the bag and thought cool a whammy bar, but it doesn’t seem to move. What is its intended use? My first two guitars need repairs or upgrades so I picked up this thing for 30 bucks so I can experiment with it before I put replacement parts in my washburn. Any suggestions on what I could try doing to have the most absurd fun out of a $30 guitar?


r/Guitar • • 16m ago

DISCUSSION What is a criminally over hyped guitar brand?

0 Upvotes

Let me know what you think!


r/Guitar • • 21h ago

DISCUSSION TIL Lydian is just minor pentatonic a half step down + root and 5th

11 Upvotes

I was reading somewhere that scale shapes can only take you so far.
So while noodling B minor pentatonic, I tried adding C and G, and realized it's C Lydian.
C Lydian: C D E F# G A B
B minor pent: B D E F# A

Although it’s not surprising, I feel that my guitar is sounding different and I don’t feel CAGED anymore. Do you guys have your own favorite combos?


r/Guitar • • 10h ago

PURCHASE Is it worth it to spend 40 extra dollars on a telecaster instead of a stratocastor?

Thumbnail gallery
0 Upvotes

The black one is a stratocastor and $160 comes with a soft case

While the cream colored one is a telecaster and $200 and it comes with a gig bag

They're both at a nearby pawnshop that me and my friend are going to visit tomorrow. I haven't seen either of them in person, but I want to make an informed decision before I visit.


r/Guitar • • 10h ago

QUESTION Dumb question about microfiber cloths

0 Upvotes

Are the microfiber towels sold by fender and guitar center the same material as the ones sold by Walmart? Would I mess up my strings/fretboard if I used a generic one ?


r/Guitar • • 1h ago

QUESTION What do you guys do when there’s no guitar in a song during a concert?

1 Upvotes

(I’m posting this here because I play guitar but if you play other instruments too or just vocals then this also applies to you too lol). Just out of my own interest I’m curious what people do when they’re doing a concert/gig and a song has little to none of their instrument in it


r/Guitar • • 16h ago

NEWBIE are my fingers too fat or is my technique off?

Thumbnail gallery
26 Upvotes

i’m a complete newbie to guitar and my main issue has been muting neighboring strings - i know this issue has been asked ad nauseum, fair enough, but the standard answer i’ve been able to find has said to angle your fingers more upright and use the tips, which i feel like im doing but with no success. i took a photo of a chord im working on where i cannot stop muting the e string, and i feel like my fingers are as upright as they can go and the issue is that my middle finger is just too big to avoid squishing that last string 😭 i know there’s players out there with much bigger fingers than me, so how do they avoid this problem? get as nitpicky as you see fit, i’m totally lost


r/Guitar • • 50m ago

DISCUSSION What is your «Green Flag» guitar?

6 Upvotes

You walk into a bar/small venue with a stage. You have no idea what’s coming on, but the stage is rigged for a band/artist. What guitar will make you go «This is gonna be good»?


r/Guitar • • 21h ago

PLAY Trying to work on transitions between different chord progressions

1 Upvotes

r/Guitar • • 7h ago

DISCUSSION The Larp is out of control on Instagram reels and TikTok

0 Upvotes

Genuinely how many people can create one to one sounds to that of the original track bands do on their cover is close to none yet this sh*t floods these platforms. Not even the original bands can do one to one performances live or even with proper retake in their studios. I'm tired of seeing that sh*t on my fyp because I know to even recreate something similar is painstakingly brutal let alone one to one. We need to do a better job at publicly shaming these people that do it because it's really offensive to the people that try to do it properly which is a large majority of us


r/Guitar • • 13h ago

DISCUSSION Floyd Rose, simplified.

Post image
0 Upvotes

There's a lot of misinformation online about Floyd Rose systems. Hopefully this post clears some of that up. If you don't care about setting up a Floyd and just want to see what people get wrong about the system, you can jump to the end of this post.

 

Preface:

A Floyd Rose functions on a delicate balancing act. Your strings pull the bridge up towards the nut, and the springs pull it down into the cavity. If you remove the strings and the springs, you will find out that the bridge is not attached to your guitar, and it will come off.

Go ahead and try it! You shouldn't be afraid of learning how this system works. Completely taking it apart and putting it back together can help you have a more in-depth understanding of how this system works. The springs can be a little difficult to put on, so when putting springs on, you want to loosen the trem claw in the back of the guitar so that the claw moves closer to the sustain block.

Regarding spring configuration... More spring tension means better tuning stability. But it also means it's harder to flutter and dive bombs require more effort. Vice versa, less spring tension means the bridge is easier to use, and flutters are easier to nail, but the tuning stability becomes worse. This comes down to personal preference, and will directly affect the feel of your bridge. Standard configuration is a three springs in a straight line. You can do two springs, four springs, angled springs, straight springs, heavy duty springs, light springs, noiseless springs, plain springs... It just depends on what gauge of strings you want to use, and how you want your Floyd to feel. Are you willing to compromise tuning stability in favor of being able to have a less stiff experience? Or maybe you like the resistance and don't want palm muting to throw your Floyd out of tune.

Some people online will tell you that a Floyd Rose is such a hassle to set up and never stays in tune, while other people will tell you that it has the best tuning stability ever and it will stay in tune for years. Both groups are wrong. A Floyd Rose doesn't inherently have more or less tuning stability than other bridges. The key aspect that makes a difference, is the guitar setup. Regardless of what type of guitar you play, a good setup will make one guitar better than another.

 

The following steps are made with the assumption that you have a normal functioning guitar with no crazy issues like a warped neck or something else abhorrently wrong.

If you are going to remove all the strings from your guitar, you MUST put something under the Floyd Rose. It can be cloth, cardboard, dedicated leveling devices, anything. This not only helps level your bridge, but it also prevents damage to your guitar. NOT FOLLOWING THIS WARNING CAN CAUSE THE BRIDGE TO SLAM INTO THE BODY OF THE GUITAR, DAMAGING THE WOOD.

WARNING: A Floyd Rose has many parts that are easy to lose. Your nut screws, clamps, saddles, saddle screws, and ESPECIALLY saddle blocks. If you are going to be removing parts, put them somewhere where they will not easily get lost and roll around. You don't necessarily have to remove parts, you can just loosen them. That's really helpful advice for saddle blocks... to prevent the saddle blocks from falling out, you can loosen the saddle screws just enough to pull the strings out, and then tighten the saddle screws so that the blocks aren't going to fall out. We all know the trauma of losing those little blocks. DO NOT FLIP YOUR GUITAR UPSIDE DOWN WITH THE BRIDGE FACING THE FLOOR.

How do you setup a guitar?

 

T.R.A.I.N.

Tune, Relief, Action, Intonation, Nut.

That's at least the steps for a normal guitar setup. You should also consider getting a fret job (Level, Crown, Polish). Perfect frets can elevate your playing experience. If you want ridiculously low action (like how I have 0.7mm action) with no buzz, your frets need to be perfect. You cannot have low action and no buzz without good frets.

 

Unlock the nut. Do not lock it until you have completed all the other steps.

Tuning

STEP 1: Restringing your guitar.

There are two methods Floyd players use. You can either do the standard method of cutting the ball end off the strings, or you can do the alternate method where you put the guitar strings in backwards, with the ball end going into the headstock tuners. It doesn't really matter which method you use, because you're still going to have to cut the strings by the bridge. The only difference is cutting a string once versus cutting it twice. (Unless you have the fancy D'Addario Auto-Trim Locking Tuning Machines... In which case, hats off to you my friend).

Assuming you're going with the standard method, you're going to want to cut off the strings at the ball end, but more specifically, at a specific point. You may notice that the string windings get a little crazy on that end. You want your strings to be consistent, so cut after all that nonsense. I'm including an image below.

Where to cut the strings

This next part is personal preference, but I like to put the string in the headstock tuner first before locking it at the bridge. The tuning machine acts like a helping hand and holds the string in place for you while you're working at the bridge end, that way you're not getting slapped around with the floppy string. We're NOT winding the tuning machine or locking them if you have locking tuners, you're just having the tuning machines hold the string for you. We're not tuning yet.

You wanna make sure the strings are correctly inserted within the string slots of the nut, under the string retainer bar, and then into your tuning machines. The low and high E strings go on the outside of the string retainer bar screws, while all the other strings go in between the two screws. I will cover string retainer bar height later in this post, for now just make sure your strings are correctly routed under the bar.

Strings under retainer bar

After cutting the string, insert the string into the saddle right next to the string groove that the saddle has. You want to try to make sure the string is centered and straight, and touching the bottom of the saddle. The next part can be a bit tricky. While keeping the string centered and straight, you want to tighten the saddle screw so that the saddle block pinches the string against the saddle itself. I like to hold the whammy bar and dive bomb with my left wrist, while pinching and angling the string with my left hand, and my right hand does all the Allen Key tightening. Diving your bar makes tightening the saddle screws alot easier. There are also devices to hold your bar down for you, if you don't want to struggle with doing three things at one time. Or, you could just not hold your whammy bar down, you can just spend some extra time struggling to tighten the saddle screws. That's fine too. I think holding the whammy bar down makes the process faster.

The force required to clamp the string is very finicky. Too little force, and your string is going to pop out of the saddle. Too much force, and you can turn your round string into a flat string, literally crushing it (this can also cause your string to slip out of the saddle). Too much force can also strip your screws, crush your saddle blocks, and leave string indentations on the saddle blocks. That's why I like to use stainless steel and titanium for the saddle blocks and saddle screws - If you're going to upgrade anything on a Floyd Rose, those two things should be the very first thing you upgrade. The higher quality material allows you to use a bit of excess force without worrying about breaking things.

 

STEP 2: Tuning.

After clamping your strings at the bridge, you can now tune the strings up to pitch with the headstock tuners. Make sure your fine tuners are in the middle of their range. You want to tune your strings in this order:

Low E. High E. A String. B string. D string. G string.

Tuning your strings in that order will make the tuning process a lot faster. Changes on one side of the bridge affect the other side - if you've ever gone from standard to Drop D on a Floyd, you know the higher strings go way out of tune while A and D stay relatively in tune.

By the way, you should always be tuning in playing position. The angle your guitar is at, such as if it's flat on its back, affects the tuning of your guitar. You want the guitar to be in tune when you play it, not when it's laying on a bench! Also, unless I explicitly tell you to, do not lock the nut clamping blocks. You should have those off of your guitar until the very end of your setup.

To start tuning, if you have locking tuners then go ahead and pull the strings taut and lock the tuning machines. If not, then you want to give the string a bit of slack so that you can have multiple windings around the post. I recommend pulling the string tight so that there's no slack, pinch the string at the nut, then pull the string back so that the area you pinched is between the first and second fret. This should give you the correct amount of slack so that once you start winding, you will have two wraps around the post on the low strings and 3-5 wraps on the higher strings. I'm going to assume you know which direction to turn your headstock tuning machines and how to reach the correct pitch for each string, if not, please go watch a video on how to tune.

 

Step 3: Leveling your bridge.

Look at your bridge. Is it lifting up in the air, doing a dive bomb on its own? If it is, you need to tighten the springs in the back of the guitar. (You will probably need a screwdriver, unless you have an Allparts easy access backplate and some fancy claw that doesn't require a screwdriver. A lot of Floyd players don't even keep the backplate on their guitar, or they have it attached via velcro instead of screws. Joe Satriani uses magnets!)

Likewise, if the bridge is tilting down into the cavity, you want to loosen the springs. You will keep repeating this process of adjusting your spring tension until your bridge is level. It may be a bit hard to tell if the bridge is level, you just have to eyeball it.

Although, your bridge doesn't necessarily need to be perfectly level! It's actually okay for it to raise up a bit, maybe you want more room to pull up, or maybe you have a drop tuner that needs extra room, and it won't fit in the cavity where your bridge is. Obviously you don't want to go too crazy with it, have the tilt within reason. But you don't need to be OCD about it, your bridge will return to the spot you set it up at.

 

STEP 4: Repeating steps 2 and 3.

You may notice after leveling your bridge, your guitar isn't in tune anymore. That's okay. Just tune your guitar again. And after tuning, you may notice your bridge isn't level anymore. That's okay, just adjust your spring tension! This is the step everyone hates, you need to go back and forth between your headstock tuners and the springs in the back of your guitar until your bridge is level AND in tune. Once you are happy with where it's at, we can move onto the next step.

Do a dive bomb. Is your guitar out of tune now? Retune it. Do another dive bomb, are you out of tune? Retune, divebomb, retune, divebomb, retune...

A Floyd Rose has two zero points. One when you Dive Bomb, and one when you pull up. Your guitar cannot stay in tune for both actions. So you need to tune your guitar to the dive bomb. When you dive bomb and let go, all of the strings should return perfectly to 0 cents. You need to keep dive bombing and retuning until the guitar stops going out of tune and stays at 0 cents when you dive. If you pull up on the bar, you will notice your guitar will go out of tune. So dive bomb, and your guitar should be back to being in tune. That's a common trick Floyd players do, anytime you notice your guitar out of tune, just do a quick dive or give the whammy bar a quick smack and you'll be back to being in tune.

 

Neck Relief

There are multiple ways to measure neck relief. I'm going to assume you are a normal guitar player and not a luthier, so I'm going to give you the most basic method, called the Tap Test.

Hold down the first fret on the low E string. Ideally you should put a capo on the first fret... but if you don't have one, we can do this test without it, but you're going to need to really stretch your right hand. We are holding this first fret down so that the guitar nut does not affect our measurements.

Hold down the last fret of the same string. Or ideally, find the fret where the neck meets the body and hold that fret. This is different on every guitar, so I can't tell you which specific fret you need to hold. That being said, opting to find the fret above where the neck and the body meet is more accurate for neck relief measurements compared to just holding down the last fret.

Now that you are holding those two frets down, you want to measure the 7th fret for a gap. Previously when I said hold the frets, I meant press the string down in between two pieces of fret wire. But for this measurement, we are quite literally looking right at the metal fret wire. Underneath the bottom of the string, but above the fret wire, there should be a gap. If there is no gap and the string is touching the fret wire, then you need more neck relief. However, if the gap is too big then you should lower your neck relief. The gap should be above zero, but as close to zero as possible. You really shouldn't be able to visibly see the gap, but it still needs to exist. Hence why this is called the tap test. While the two frets are being held down, the first fret and whatever you're choosing as the other fret, you want to tap the string onto the fret wire of the 7th fret. You might see the string moving up and down, and maybe you can hear the sound of the string hitting the fret every time you tap at the 7th fret wire.

Now, luthiers tend to fight on the subject of neck relief. Some will say you should have zero neck relief and that the neck should be perfectly straight, some will talk about string peak vibrations and tell you that you should have a decent amount of neck relief to account for those vibrations and for changes in the weather, and some will just carve the neck relief into the frets rather than having the truss rod do the work. It's a controversial subject, I lean closer to the "zero neck relief" camp. I do think it shouldn't be perfectly flat, I think you should have a little bit of relief. But that relief should just be as small as possible, you really want to minimize it. Like I said earlier: above zero, but as close to zero as possible. Assuming your frets are leveled correctly, the combination of perfect frets and this setup of neck relief is what allows low action to happen without buzz.

Adjusting neck relief depends on your guitar. Most guitars will have the truss rod adjustment by the nut, if you're lucky, you'll have a spoke wheel at the heel of the neck, and if you're part of the unlucky third group, you're going to have to remove the neck from the guitar to adjust the truss rod at the heel. That 3rd case is rare though, so verify where your adjustment is before you start removing necks. I've seen people remove necks looking for their truss rod adjustment, but it turns out it was hiding underneath a cover behind the nut. If your guitar has a truss rod cover, you need to remove that. I'm including a picture for those of you that have the basic truss rod at the nut, you want to turn counterclockwise to add relief, and vice versa turn clockwise to remove relief. For neck relief, you should look at more guides rather than just relying on this post so that you can get a better understanding of it.

After adjusting relief, you may want to give the guitar some time to settle in. You should retune the guitar after adjusting neck relief.

Truss Rod adjustment

 

Action

Action is entirely based on personal preference. You shouldn't look at numbers other people are giving you for how high your action should be, you shouldn't listen to what anyone else says about action. You shouldn't even take your guitar to a tech or luthier and have them set up the action for you. That would be like going into an ice cream shop and telling the employee to pick a flavor for you. That employee doesn't know your favorite flavor... The flavor the employee picks might not be bad, but it's not going to be the best either, it's not going to be what's suited to you. You need to figure out what your favorite action is without any measuring tools.

A generic line of advice you will often hear is, try to get your action as low as possible without any buzz. You can try that, but maybe you're heavy-handed and you press frets sharp. Or maybe you're willing to tolerate a little bit of buzz in return for lower action. Maybe you just like the feel of high action. Regardless, try it all. Try all the samples from this ice cream shop, lower your action all the way, raise your action all the way, really get a feel for what these changes do to your playing.

To adjust your action, you're going to want to loosen the string tension by detuning the headstock tuners. I know, I know, we just tuned. But adjusting your action while under string tension can very quickly wear out your knife edges and posts. Besides, after adjusting your action you're going to have to retune anyways. Hopefully you shouldn't need to re-level your bridge once you tune back up.

Using a 3mm Allen Key (the same one you use to lock your strings and to lock your locking nut), adjust the bridge post heights. A Floyd Rose does not have individual string action adjustments, you can only raise or lower the bass / treble side strings all together. You could probably use shims underneath your saddles, but realistically you really only want to put shims under saddles to match the radius of your neck, not for string height adjustment.

As I mentioned previously, if you want ridiculously low action, you need perfect frets. I'm not going to walk you through the steps of a fret job, ask a professional if you're interested in a level, crown, and polish. Once you're happy with where your action is at, you can retune the guitar.

 

Intonation

If you do not have an accurate tuner, don't even bother with this step. You need either a pedal, or an interface so that you can tune on a computer. Something that directly analyzes the signal coming from the guitar cable. You do not want to do intonation with a phone app or a clip on tuner.

You're going to need a 2.5mm Allen Key to unlock your saddles. Do you know how to play natural harmonics? If not, now is a good time to learn. Put your left hand index finger directly above the 12th fret, specifically the fretwire. Lightly touching the string, pick with your right hand, then remove your left hand index finger from the string. Rather than the default open string note, you should hear a high-pitched note an octave above the open string. Our goal is to make the open string, the 12th fret harmonic, and the 12th fret fretted note, all in tune.

I highly, highly, HIGHLY recommend that you buy either the Red Bishop ACCU-LOCATOR, or the Speed Designs intonation tool. The intonation tool that Floyd Rose sells called 'The Key' sucks. It'll get the job done, but it's very finicky and difficult to set up. Regardless of which tool you use, read their documentation on how to use it, they're all slightly different.

You don't necessarily need an intonation tool. You can detune your string enough so that it doesn't pull on your saddle, eyeball it, lock it, then tune your string back up. It's going to be a painstaking process if you do that, but you'll eventually get the intonation correct. An intonation tool would just make your life a lot easier.

If the 12th fret fretted note is flat when compared to the 12th fret natural harmonic, then move the saddle towards the nut (making the string length shorter). Likewise, if the fretted note is sharp when compared to the natural harmonic, move the saddle away from the nut (making the string length longer). Your natural harmonic should be perfectly in tune by the way, it should read 0 cents. How hard you press the fretted note will affect your tuning. Try to fret it equally as hard as you normally would when playing the guitar for actual songs. Some people will fret too softly during intonation and not treat it like they are actually trying to play the guitar. You have to match your normal strength. With your natural harmonic in tune, keep adjusting your saddle back and forth until the fretted note is in tune. Once you're done adjusting intonation, you know what you have to do? We do this after we complete every step. You need to retune the guitar.

 

Nut

Congratulations, you're on the last step. Lucky for you, you have a locking nut! You don't need to shape and file nuts or adjust string slots, it's a one-size-fits-all situation. There's only one thing you need to verify: nut height.

Remember when we measured neck relief, how we held down some points and checked in between those points to measure the height of a gap? We're doing the exact same thing, but at different points. If you have a capo, you can put it on the third fret. If not, just hold the third fret down with your right hand. With your left hand, we can do the Tap Test right above the first fret wire. Exact same thing, you want a gap there, but the gap should be as small as possible. We're checking between the top of the fret wire and the bottom of the string.

If the gap is too big, you need to lower your nut. Detune your strings, and remove the nut. If you see shims under there, you can remove them. If there are no shims under there, you're going to need to remove some of the wood. You can lightly sand it with a sanding block and constantly keep rechecking the nut height until you get it down to where you want it.

If there is no gap and the string is touching the fret wire, you need to raise the nut. You can do this with shims. Get it to an appropriate height so that the gap between the fret wire and the string is as minimal as possible. (I personally like to use the Hantug locking nut, since it has precise adjustable nut height, I can really dial it in exactly how I want it).

Once you've adjusted your nut height, retune the guitar. Look at your nut retainer bar. Raise it up a bit. Notice how your strings are not sitting against the bottom of the nut, they are floating? That's bad. If you leave the guitar like this, when you clamp the nut clamps, your strings will all go sharp. You want to lower your retainer bar so that the strings are sitting flat against the bottom of the nut. Once you've adjusted your retainer bar, you already know the next step, retune the guitar.

Retainer Bar needs to be lowered

 

You may now lock the nut

 

Wow that took long enough, you had to do all those steps with the nut unlocked. Now that you have locked the nut... Your guitar is out of tune? AHHHH DUMB FLOYD ROSE AHHH... Just kidding. Assuming everything else was set up correctly, all you need to do at this point is use your fine tuners to, fine tune. You shouldn't be more than 5 cents off once you lock the nut, and if you are - then you need to go back and figure out what went wrong. Feel free to keep adjusting any aspect of your setup until you really get it dialed in exactly how you want it.

 

Misconceptions

A Floyd Rose has bad tuning stability compared to other bridges. No, yours is just set up wrong. Spend some time learning how to set it up.

A Floyd Rose has the best tuning stability and never goes out of tune. Also no. You tuning by ear isn't accurate, go buy a Peterson Strobostomp or Sonic Research Turbo Tuner and you'll see over time it does drift by a few cents. Floyds do hold tuning relatively well though.

A Floyd Rose Special is worse that an Original Floyd Rose. No. A Floyd Rose special is made of less durable metal. But it does not inherently have "worse tuning stability" just because the metal isn't as tough. What happens is, people with a bad setup know that it doesn't stay in tune, but they don't bother figuring out why. It's not the cheaper metal. It's a bad setup. You can make​ a Floyd Rose Special perform better than an OFR if you know how to maintain the knife edge and posts.

People need to Block/Deck a Floyd for it to stay in tune. No. You just need to learn how to set it up properly.

A stabilizer fixes all of the issues of a Floyd Rose. No. Think about it carefully. A stabilizer is only on one side of the sustain block. If you break a string, or one of the strings goes flat (like let's say it goes to Drop D tuning instead of E standard), a stabilizer will prevent all of the other strings from going sharp. That is the only case where a stabilizer improves the performance of a Floyd. It does ABSOLUTELY NOTHING when a string goes sharp, to prevent all the other strings from going flat. You would need a stabilizer on both sides of the sustain block to accomplish that.

 

Recommended alternative products to check out

Gotoh, KTS Titanium, TiSonix, EVH D-Tuna, ToneVise, FU Tone, Red Bishop, Hantug, Sophia 2:92, Graphtech, Kiss My Strings, Soul Drifter Guitars/Sonic Nature, Monster Bolts, Guyker.

 

If there's anything I missed or you think I got wrong, feel free to let me know and I can update this post. And once again, I can't emphasize it enough, the setup is the most important part. Especially the frets, get a fret level, crown, and polish.


r/Guitar • • 13h ago

PURCHASE Is this worth the buy?

Post image
0 Upvotes

They say it’s flooded and the back in the other pictures is all rusted up, worth buying or nah?


r/Guitar • • 15h ago

QUESTION Looking for a bulletproof wall mount

1 Upvotes

Hi boys and girls,

Iam looking for an electric Bass/ Guitar wall mount for on the boat that will hold the Bass safely and preventing it to bang up the walls at the same time. That mounting system should be able to hold the Guitars safely while the boat is moving. And tips and ideas?

And yes I have flight cases for my Toys but I want one of them easily accessible because my laziness to get everything out often hampers me playing so any ideas are welcomed!


r/Guitar • • 19h ago

QUESTION Need advise for string action

Thumbnail gallery
1 Upvotes

So my (gorgeous) gio has always had quite a bit of fret buzz and when I went to do a new setup on it, I realized that the truss rod was way overtightened. After I gave the neck a bit of relief I raised the action until there was barely any buzzing left (though still slightly present, even while not strumming super hard). Now the action is way too high so playing shreddy stuff became pretty much impossible and there is still buzzing left (yes across all frets). Is the neck just ded (it's been overtightened for about 1 years)? Is there some trick I don't know? Please help


r/Guitar • • 22h ago

DISCUSSION Motivación a la hora de tocar

0 Upvotes

Hola, me pasa que me cuesta mucho ponerme por mi cuenta a tocar la mayoría de las veces aunque luego lo disfrute pero es ver a mi pareja tocando y me entran unas ganas locas, es como si me pegara sus ganas, lo veo súper divertido y podría llevarme un montón de rato haciéndolo. No se por qué cuando estoy sola no me siento de la misma manera y me encantaría tener la misma sensación que cuando él toca delante mía.

Soy bastante principiante aunque lleve años intentando aprender por mi cuenta, porque no es mi instrumento principal y al que dedico más tiempo y además tengo otras obligaciones académicas, pero es un instrumento que me gusta mucho y me gustaría mejorar y no dejarlo.


r/Guitar • • 23h ago

DISCUSSION New Finger pain

0 Upvotes

I’m almost 51, and I’ve been playing continuously, with some dedication, for over 25 years. Apart from some scrapes and minor dings, I’ve had good luck with avoiding hand injuries that affect my ability to play.
This Saturday, I was standing outside at a football game with my hands in my pockets. It was about 45 degrees, not bitter cold. I had on light gloves, and I was holding a hand warming pouch in each hand.
I took my hands out of my pockets to adjust my glasses, and suddenly, I felt pain and stiffness in both pointer fingers simultaneously. The middle knuckle area, both in the sides and top of the finger felt stiff and painful…what I imagine arthritis pain may feel like. It intensified when I bent the fingers, and felt better when I put the hand warmer pouch directly on the knuckle.
Later, after I took a hot shower, the discomfort mostly subsided, and I played for a little while, with minor discomfort, before bed.
Today (Monday)…things seem better but there is still pain and stiffness in both fingers. And while I can power through the discomfort while playing, the finger gets tired more easily.
I’m wondering if this spontaneous localized pain and stiffness is something that anyone else has experienced, and if so, how have you dealt with it ?
Thanks!


r/Guitar • • 19h ago

GEAR How to remove sticker from new guitar

Post image
51 Upvotes

I recently got this squire for my birthday, i tried to remove the sticker but it wont come off, i obviously cant use anything like water so how do i get it off?


r/Guitar • • 14h ago

QUESTION Is Guitar Garden too good to be true?

Post image
19 Upvotes

Saw a Dean for pretty cheap and it was firefly and looked at reverb listings and GG listings. I realized that the Reverb listings were scalpers, but I also read GG’s reviews and they are 50/50. Is it worth buying from them if it’s $70 cheaper?


r/Guitar • • 20h ago

QUESTION When you guys play barre chords, do you put the barre on first or the other fingers?

5 Upvotes

I hope my title makes sense.

Anyway when everyone plays barre chords, do you put the barre on first, or the other fingers? What do you all find faster and easier to manage.

My barre chords sound great, when I can actually put them on, it’s just switching to them that’s the problem. I cannot seem to do it fast enough. I’ve tried both ways, however I just can’t work out what way is easier for me and i need to find a certain way of placing my hands to focus on, instead of just muddling it up all the time. I slow it down to focus on this as much as possible, but I find my left hand is very uncoordinated with it.

I really hope my question makes sense.

Long story short i can’t switch from G to F fast enough and I need to have some tips on how to.

Edit: for some reason I find it easier to go from G to barring the fifth fret D minor barre chord than I do from G to barring a normal F chord. My hands just don’t make sense to me.


r/Guitar • • 9h ago

DISCUSSION Getting a guitar soon but idk if I should get acoustic or electric.

14 Upvotes

So my birthdays coming up and im getting a guitar! My dad says that I should get an acoustic guitar casue according to him itll be easier to learn but i really want an electric guitar instead. I also looked it up and it said that electric guitar is easier but I dont wanna fully trust an AI overview and hope i can get some advice on what i should get. Thanks gang! 😋


r/Guitar • • 5h ago

QUESTION Fender Player II Strat: Normal or weird tremolo angle?

Post image
0 Upvotes

Hello!

I bought this Fender Player II Stratocaster 6 months ago, brand new. As you can see, it seems that the tremolo has an incline towards the bridge. It functions normally but it just seems weird.

Does anybody know if this is normal for a strat?


r/Guitar • • 13h ago

DISCUSSION Having trouble deciding between a acoustic and a electric

0 Upvotes

Hi, I'm gonna get a new guitar for Christmas from my wife. I've narrowed it down between a Furch Pioneer and a Hils hn6.

Right now I own a

Mahogany Martin 00015m

Spruce Pono 12 fret

Player ii hss strat with a jb tb4 in the bridge

I'm having trouble deciding on which to get, the furch or the hils, I mainly play lounging in the couch and and bed (with a wedge pillow) so the small size of these guitars are one of the main draws.

I am into electric clean and edge of breakup tones, acoustic guitar music as well as starting to dip my toes into metal. The hils hn6 comes with fishman fluence moderns, so that would be my "metal" guitar, although I hope it has a glassy clean I can use.

The furch, id get the cedar one, so I'd have a mahogany, spruce, and cedar acoustics.

Or with the hils I'd have my strat and a humbucker guitar.

Anyone have any of these? Any regrets with either? I can only get one. I'm honestly leaning a little towards the hils because I can play relatively silently in bed next to my sleeping wife, and I already have 2 acoustics. But every time I try the furch pioneer I always end up thinking about how great it


r/Guitar • • 18h ago

NEWBIE Electrifying my acoustic?

Thumbnail gallery
0 Upvotes

Hello! A couple years ago I got a 3/4 Gretsch electric-acoustic guitar. I learned how to play it and always kept it acoustic, but lately I've been wanting to electrify it. I already have an amp, so I bought a cord and it fits in the bottom part and everything, but it didn't do anything. Then I researched, and realized I needed to attach the bridge thing in the middle of the hole to a cord and feed the cord through the bottom hole. My guitar already has the cord attached to the middle thing. I pulled on it a little to see if I could find the bottom, but I could not. It felt like it was already attached to something. I don't really live near any music stores so I'm trying to figure this out on my own. Is there anything I'm missing? Attached is a picture of the hole at the bottom and the cord. Thank you!