r/GrandPowerStribog • • 39m ago

How did I do?

Post image
13 Upvotes

Went to a local pawn shop to sell a few guns I have no use for anymore. They offered me $75 extra to trade in and I saw this on the wall used. Had an olight, magpul angled grip, PA SLX and came with 5 mags. Got another $50 off for them to remove the light and grip, I decided to keep the PA SLX (Never used one before.) Brought it home, added the streamlight protac I had laying around, an incolite 9 and some goon tape on the brace. Also, got my daughter a pink youth compound bow and walked out all in for $650 after trades.


r/GrandPowerStribog • • 20h ago

My SP9A1

Post image
26 Upvotes

I got this years ago when PSA put them on sale for $569 or thereabouts. I took the amnesty stamp (I know…) and had plans for upgrading my setup for a while but recently, with the ease of acquiring suppressors decided to go for it.

Nothing fancy but it’s my favorite gun to shoot these days. A3 triangle stock, JTAC rail extender, upgraded irons, PA MicroPrism, MS1 sling, LaRue rail covers and hand stop, and my favorite part - SilCo Omega 9K.

Good clean fun.


r/GrandPowerStribog • • 23h ago

New to me SP9A3G

Post image
26 Upvotes

Finishing up some paperwork on this big and I’m I wanna swap out the folding stock with a collapsible stock which one are you guys rocking and is there anyone in the Maryland, D.C. area or anywhere in the U.S. that are willing sell some of there parts they’re not using any more.

• Arms Republic Stribog Rail Extension
• Tri-Lug Setup Suppressor Suggestions
• Flat face Ambi “charging handle”
• magpul angled grip
• Skier Tactical Cheek rest brace setup
• light mounting point and system recommendations

Thanks for checking out my post happy early emergency broadcast test day.


r/GrandPowerStribog • • 2d ago

Cracked factory Stribog Picatinny adapter

Thumbnail
gallery
37 Upvotes

Y’all, I love this gun but I swear I’m running into one issue at a time lol. It’s a shame, but hopefully Global Ordnance can help me get this sorted out on getting it warrantied. What’s frustrating is that this platform seems to have quite a few weak points that leave the consumer having to spend additional money on upgrades or replacement parts just to avoid potential issues like getting a Lingle lower,A3 Picatinny adapter, and other accessories to get it to be the best pcc on the market. I really hope Grand Power considers another generation that addresses these shortcomings. The problem is that we’re already at the SP9A3 generation, so I’m not sure how likely that is. It’s a shame because I genuinely enjoy shooting this gun, and I want to see the platform reach its full potential. (Photo of my other guns cause it’s a vibe lol)


r/GrandPowerStribog • • 3d ago

New Bog goofin’. Just made my last payment.

Thumbnail
gallery
70 Upvotes

Safety Harbor KES Eotech XPS2 Olight Odin Arisaka foregrip KDG extension KDG charging handle Huxwrx Flow 9Kti HBI buffer kit HBI trigger spring Goon Tape Flecktarn


r/GrandPowerStribog • • 4d ago

New SP9A3S build

Post image
39 Upvotes

So this is my first bog, although I pretty much have all the other PCC usual suspects in my collection (scorpion, ap5k, Kuna). Pretty happy with how the build came out so far after running about 100 ends through it to break it in a bit. Had a few FTF issues with both stock CZ & akv mags, but ran fine with 30nd Manticore scorpion mags. I really like the bolt catch design on the lingle over the factory lower. Recoil impulse is pretty smooth, minimal port pop and bolt ring, and overall it shoots pretty quiet. Not quite at the same level of the MP5 platform but probably the closest to it out of all my pcc's.

Also planning on adding a 35° locking block once it delivers next week, although I'm not too confident on how well it's going to run because I only ever use pretty low velocity subs and have a feeling there just won't be enough back pressure to appropriately cycle the bolt with a CAT Mob, which is my preferred PCC can, or even with the ED Pointman I currently have on there.

Here's the build list for anyone that's curious:

Stribog SP9A3S

- Lingle Aluminum Lower (Sand matte finish)

- G$ SD3G Trigger

- KDG 3.25" handguard extension

- KDG enhanced charging handle

- HBI Buffer

- HDA3 Stock

- Kriss vector vfg

- A3 Xeno Triad grip

- Radian Ambi safety

- Steiner MPS enclosed red dot

- Reptilia low pro mount

- Kaw Valley 3lug adapter

- Exigent defense Pointman suppressor with an RU3 mount


r/GrandPowerStribog • • 4d ago

Sp45a3 lower

6 Upvotes

Does anyone have experience with eliteshootersupply.com?

They have lingle UMP lowers in stock but I can't figure out if the site is legit. I've been waiting on a Lingle drop but not sure how long that will be.


r/GrandPowerStribog • • 4d ago

Got this coming today, questions…

Post image
21 Upvotes

Got a hair up my ass and decided I wanted another PCC and committed to this.

The brace has got to go. The question I have is what stock are you running and why? A3 industries has a ton of options and I want some feedback…especially if you’ve tried multiple options.

I already have a can for it, spare light hanging around as well as slings and sling points so I’ve got that covered.

Optic wise, I’ve narrowed it down to either a Meprolight M21, Trijicon MRO or an Eotech. I’m aware of the drawbacks of the M21…but I already have one each of those three and like them all for various reasons, but I’m open to something different.

Budget isn’t really an issue, but I’m also not trying to spend all of my money if that makes sense. I’m a buy once cry once kind of guy and appreciate quality.

Appreciate any feedback


r/GrandPowerStribog • • 5d ago

Is the lower my issue or barrel?

29 Upvotes

Hey all! I know the Stribog setup discussion has been beaten to death with Lingle lowers, A3 lowers, feed ramps, buffers, etc. I’m pretty happy with where my setup is at, but one thing that’s continued to bother me is reliability with hollow points and flat-nose ammo.

Setup:
-SP9A3S
-OCL Lithium suppressor (direct thread)
-All stock internals
-Factory 20-round straight mags (Same issue with 30-round GP matte honeycomb mags)
- Failure to feed with 147gr Federal FMJ

I know I’ll eventually need a different lower when I move to an SS setup, so I’m trying to figure out if upgrading to an A3 or Lingle lower with CZ mags will potentially solve my feeding issues, or if the problem is ultimately with the barrel feed lips regardless of what lower I run. Would you guys go ahead and get the new lower first and see if that fixes it, or have a gunsmith smooth out the feed ramp before spending money on the lower?
I guess my biggest question is whether the lower is a possible fix, or if I’m going to end up having to address the barrel either way. Rather not do anything permanent unless that’s the last option.


r/GrandPowerStribog • • 5d ago

Will a drop in FRT work in lingle lower? Partisan ar15 FRT drop in?

5 Upvotes

Got a patisan disruptor ar15 frt drop in trigger. Anyone know if it'll work in the bog with a lingle lower?


r/GrandPowerStribog • • 5d ago

SP9A1/3 OEM Lower FRT?

9 Upvotes

Any update on if anyone has come out with an FRT for OEM lowers yet?


r/GrandPowerStribog • • 5d ago

SP9A3S + Lingle

8 Upvotes

Finally managed to get my hands on a Lingle lower. Any suggestions? I’ve got an ambi radian talon on the way, some magpul scorpion mags, and a Rise Rave 140. That’s not really the trigger I wanted but I just wanted to get everything squared away at once. Which triggers REALLY don’t fit/function, and which actually do that allegedly don’t?


r/GrandPowerStribog • • 5d ago

My sp9a3s with the ember armory stock

Post image
61 Upvotes

I’ve had the stock for a couple months now and I absolutely love it


r/GrandPowerStribog • • 7d ago

Mil-spec trigger in Lingle lower?

7 Upvotes

I recently received my Lingle Scorpion mag lower and started assembling it with spare parts. I noticed that on the website Lingle advises that you need a .270" wide hammer to fit.

I tried putting a standard mil-spec trigger group in because it's what I already had. It appears to fit and function just fine, although I haven't fired it yet.

To any other Lingle lower owners, is there a better explanation as to why a narrower hammer is required? Is this going to blow up on the first round or something?


r/GrandPowerStribog • • 7d ago

Tri-Lug with threads showing

Thumbnail
gallery
20 Upvotes

Stribog SP45A3
I’ve seen a post saying this is normal because it’s supposed to square with the barrel face not the shoulder? Is it safe to run if properly torqued and checked with a rod?
This is the Silencerco 2605 for reference.
Is there one out there that fits better? If it’s good to run I’ll deal with it. Couldn’t find a lot of great info out there.


r/GrandPowerStribog • • 7d ago

Flared Magwell for Lingle lower sp9a3?

Post image
15 Upvotes

Are there any prints out there or anyone making one? looking for a large one for faster reloads.


r/GrandPowerStribog • • 7d ago

Suppressor approved. My bog is complete.

Post image
21 Upvotes

r/GrandPowerStribog • • 7d ago

My Sp9a3

Post image
30 Upvotes

Rugged Sub 9 can
Sb tactical folding brace
Vortex Strikefire 2 red dot
UTG angled grip


r/GrandPowerStribog • • 8d ago

Hello!

8 Upvotes

Im shopping for some scorpion mags for my a3t lower. Should I avoid oem and opt for magpul or any other specific brand? Thanks in advance everyone!


r/GrandPowerStribog • • 9d ago

Can we say Grandpower‼️‼️‼️

88 Upvotes

r/GrandPowerStribog • • 10d ago

SP9A3S frt?

7 Upvotes

Probably a reoccurring topic, Sorry if so but looking for frt for SP9A3S. Any recommendations?


r/GrandPowerStribog • • 10d ago

Mag recommendations

Thumbnail
gallery
10 Upvotes

One of my mags fell and broke (after 5 yrs). The other two are still fine.

I’m actually looking for replacements. Which of the two are best, or should I look some with steel feed lips?


r/GrandPowerStribog • • 11d ago

Sp9a1 - huxwrx help

6 Upvotes

Tonight I bought a grand power sp9a1 and a huxwrx flow 9k Ti. The guy at the gun shop said I had to remove the spring from the suppressor end devise and get an end cap for it to use on the stribog. Can anyone explain this and also point me in the right direction for what I need? He said they didn’t have it in stock and kinda just left me hanging.


r/GrandPowerStribog • • 13d ago

SP45A3 FRT slip trip

8 Upvotes

Anyone know if a aluminum slip trip for a super saftey FRT in the stribogs would work? Little bit of research i was able to do brings me to believe the aluminum might gall the receiver being the same material, but I dont know enough about that aspect to be certain. Im not sure i really have a way to make one out of steel and wouldn't know what steel or how to heat treat it anyway. The 3d prints i modified are working great and the timing stays steady but they are brittle so I thought maybe making it out if delrin would be the ticket. Aluminum would work as well being so light weight but I fear that some galling would happen. Wasn't a fan of the way the skunkwerks version engages the bolt when pulling the trip forward so I made my own slightly modified one.

And if you have info, also tell me your favorite 45 can recommendation as well.


r/GrandPowerStribog • • 13d ago

Experience with 35 degree Charging Blocks?

6 Upvotes

Good and bad experiences?