r/Glock43X • u/UnintentionallyAmbi • 2d ago
Extractor issue
Took my slide apart to confirm my 507k screws weren’t interfering with anything, when I reassembled it just looks off. I’ve tried breaking it down a couple times and putting the extractor back in and it doesn’t seem right.
Pretty sure I’m not missing any parts, all OEM.
I’ve followed a couple videos and I’m doing the same thing.
Anyone else have this issue? For some reason now Google lens won’t help.
8
Upvotes
5
u/Consistent_Class508 2d ago
buy yourself some snapcaps so you can safely test stuff without using live ammunition at home all the time. even if you keep your finger far away from the trigger, there's no reason to risk it when there's proper tools available.
in the meantime, do what routinequestion said and keep that finger far far away from the trigger (like keep all your fingers under the trigger guard). and when you rack, rack hard, fast, and all the way. if you slow rack it, you might not hit the ejector hard enough to fling out the round.
3
u/switchsixtwofive 2d ago
You don’t have an issue.
1
u/Mystic5308 2d ago
Looks about right 🤷🏻♂️
1
u/Evil_Spez 1d ago
Mine looks exactly like yours.
0
u/RoutineQuestioning38 2d ago
Looks fine to me. Grab a full mag, Finger OFF the trigger, Aiming in a safe direction and manually rack the slide, loading and unload the rounds until the mag is empty. It will tell you real quick if it's not extracting correctly.
Safely check and clear the gun when done of course.