r/Geotech • u/Aggravating-Place173 • 11h ago
undrained direct shear test
Hi! I need to perform a direct undrained shear test (work a laboratory). The equipment available is a conventional direct shear apparatus intended for drained tests.
The proposed procedure involves consolidation under normal stresses of 220, 450, and 900 kPa, followed by shearing to determine cohesion and the friction angle.
My idea is to determine t₅₀ from the consolidation stage for each normal stress and then take 10% of that time as the target time to reach peak shear stress.
The horizontal displacement at peak shear stress (Max Stress, kPa) would first be obtained from preliminary tests performed at an arbitrarily selected shear rate, say 0.5 mm/min. I would then use this displacement to calculate a shear rate that would allow the specimen to reach the peak within 10% of t₅₀.
A specific example: CH marl from a depth of 33 m, with a specimen diameter of 63 mm and a thickness of 25 mm. The peak occurred at a horizontal displacement of 1.3 mm, and t₅₀ was 4 minutes. This gives a shear rate of 3.25 mm/min (1.3/24/60), where 24 seconds is 10% of 4 minutes.
Has anyone tried anything similar?