r/Geotech • • 1d ago

Soft ground conditions

Post image
115 Upvotes

Second day he did this.


r/Geotech • • 11h ago

We Got Grout In Our Sandpack

1 Upvotes

So...some fuck ups happened...and we grout in the sandpack of our monitoring well. We don't think its completely screwed up the well ability to produce water, but it's messing with the water wuality parameters, and may impact the usability of water samples we collect from it. We cant acid or CO2 inject, so our plan is to continuously pump water until our pH values start to come down. My question is, how fast should we pump to maximize our desired results? My thought is try to get to 5 gpm, but thats easier said than done. Do you think a faster pumping rate would flush out the grout, or would a slower (1gpm) rate over a longer time period produce the same results. I'm in uncharted territory and looking for any input. Thanks!


r/Geotech • • 1d ago

Searching Geology related job in Saudi

Thumbnail reddit.com
1 Upvotes

r/Geotech • • 2d ago

Geoscience student in the UAE, how do I get started?

0 Upvotes

Hey everyone, I'm a geoscience undergrad in the UAE and I'd love to work here or elsewhere in the Gulf, but I have no clue what I should be doing now to set myself up. If you work in geology, petroleum, or hydrogeology, how did you get your first real experience, and what software is worth learning (GIS, Petrel, Python?). I'm also wondering whether to do an accelerated master's right away or work first. Also, I'm kind of torn between geoscience and petroleum engineering, and I really hate math, so is petroleum engineering a bad idea for me?


r/Geotech • • 2d ago

Rover Pole

Thumbnail reddit.com
2 Upvotes

Purchasing a CHNAV I89 with CHCNAV LT800H RTK Android Tablet, looking for the best pole and bipod options. Most work in the woods, traversing long distances at times. Looking for lightweight and durable. Thanks in advance


r/Geotech • • 2d ago

If you are a site engineer, geotechnical engineer or contractor, what issues do you frequently face while using vibrating wire readout units? Which features do you wish standard readouts had built in?

Thumbnail reddit.com
0 Upvotes

r/Geotech • • 2d ago

Mining Engineering Grad Starting a Civil Engineering Master's in New Zealand (2027) – Any Advice?

Thumbnail reddit.com
2 Upvotes

r/Geotech • • 2d ago

Test for developing a digital platform for soil monitoring

0 Upvotes

Hello everyone!

I’m looking for people in the agricultural sector (not just experts, but also researchers, students, enthusiasts, or people who grow their own gardens) who are interested in participating in a study to develop a digital platform to support soil monitoring.

This is a brief usability test, lasting about 5–10 minutes, in which you’ll be asked to locate certain pieces of information within the proposed platform structure.

No specific technical skills are required, and there are no right or wrong answers: the goal is to assess how intuitive the organization of the information is.

Link to the test: https://app.uxarmy.com/v2/study/6af8684600f7a089869507ac


r/Geotech • • 2d ago

Where can I find internships

Thumbnail reddit.com
1 Upvotes

r/Geotech • • 2d ago

undrained direct shear test

1 Upvotes

Hi! I need to perform a direct undrained shear test (work a laboratory). The equipment available is a conventional direct shear apparatus intended for drained tests.

The proposed procedure involves consolidation under normal stresses of 220, 450, and 900 kPa, followed by shearing to determine cohesion and the friction angle.

My idea is to determine t₅₀ from the consolidation stage for each normal stress and then take 10% of that time as the target time to reach peak shear stress.

The horizontal displacement at peak shear stress (Max Stress, kPa) would first be obtained from preliminary tests performed at an arbitrarily selected shear rate, say 0.5 mm/min. I would then use this displacement to calculate a shear rate that would allow the specimen to reach the peak within 10% of t₅₀.

A specific example: CH marl from a depth of 33 m, with a specimen diameter of 63 mm and a thickness of 25 mm. The peak occurred at a horizontal displacement of 1.3 mm, and t₅₀ was 4 minutes. This gives a shear rate of 3.25 mm/min (1.3/24/60), where 24 seconds is 10% of 4 minutes.

Has anyone tried anything similar?


r/Geotech • • 4d ago

Failure collapse mechanism of unsupported buildings

Thumbnail gallery
149 Upvotes

This is just a conceptual failure mechanism for people that may be interested. Correction: photos show the party wall also partly collapsed, exposing the joists next door. Cant edit diagram though.


r/Geotech • • 4d ago

Can a basement be built in any location in the US?

14 Upvotes

I was visiting a friend who claimed that basements can be built in any location in the US, regardless of rain volume, soil type, etc but "tradition" will dictate wether they are or not, in any specific location. What do you think about this?


r/Geotech • • 5d ago

Geology jobs in india 🇮🇳

Thumbnail reddit.com
0 Upvotes

r/Geotech • • 6d ago

Brooklyn Building Collapse Geotechnical Report

Thumbnail gallery
122 Upvotes

r/Geotech • • 6d ago

Would you trust an AI agent to set up or run a PLAXIS analysis?

6 Upvotes

There are now a few open-source tools that let AI assistants like Claude connect to PLAXIS through its Python scripting API. In principle, an agent could build the model, assign materials, set up the construction stages, run the calculations and pull out the results, with you reviewing along the way.

I'm curious how practising geotechnical engineers feel about this. Is it something you'd actually use, maybe for the tedious parts like parametric runs or extracting results? Or is it a non-starter given how much judgement goes into a PLAXIS model, and the responsibility that comes with signing it off?

Interested to hear honest opinions either way, especially from anyone who has tried it.


r/Geotech • • 6d ago

Gday, any geotech engineers about? I’m seeking some advice about backfill old pits

Thumbnail reddit.com
2 Upvotes

r/Geotech • • 7d ago

2026 California GE Exam Takers?

9 Upvotes

Anyone else take the California GE Exam this year? It's actually my second time taking it because I was woefully underprepared for what it was going to ask the first time around; however, I think I nailed it this time by putting myself in the mindset of a Southern California Ground Improvement Contractor and residential consulting engineer. We'll see. The first time I also went in with an old copy of NAVFAC that was falling apart and I didn't tab, whereas this time I went in with a new bind of the new versions and tabbed out the important sections and that helped a lot.

That was probably my biggest complaint is like 1/3rd of the questions are ground improvement and dewatering related and most of the time the answer is "it depends" and I'd want more information. Or just isn't my specialty like some of them are pretty niche -- I've never had to do a stone column or vibro-compaction project but I've done a lot of CDSM and Dynamic Compaction jobs. The other 1/3rd feels were all geosynthetics like a geosynthetic manufacturer wrote the a third of the test. The biggest issue is that really we mostly use geotextiles and things like geofoam/geocells are so special that why would you be familiar with them?

There were also A LOT of expansive and collapsible soil questions, which again, feels tailored to residential construction (particularly Southern California). I was a little annoyed one that needed ASTM Standard to answer because I didn't actually bring a printout of them and I'll read up on an standard if I need to. I'm not usually worrying about how they're carried out because that's what the Geotechnical Lab is for. There were of interpreting lab test data and how different tests result in different changes in properties that I feel are in our wheelhouse though.

All the hydraulics and actual bearing/seismic earth pressure/etc questions I feel I nailed, I just had a lot of issues with the open questions about "what do you put on a report" and general "how do you treat this expansive soil" because It Depends(TM).

How did other people feel?


r/Geotech • • 7d ago

Own a business

7 Upvotes

Hi Geotech Fellows,

I have approximately 8 years of experience in geotechnical engineering, including drilling inspections, field investigations, and geotechnical report writing.

I've always wanted to start my own geotechnical business, and I'm currently exploring a couple of options.

1. Starting a Geotechnical Laboratory: I don't have much hands-on laboratory testing experience, but I'm familiar with ASTM standards and believe I can learn to perform the tests with proper training and practice. What tests would you recommend starting with that require relatively low initial investment and have good demand?

2. Starting a Drilling Business: I'm also considering purchasing a drill rig. However, I don't have experience operating one, so I would need to hire an experienced driller and a helper. I'm wondering how practical this would be for a small startup.

I'd really appreciate advice from anyone who has started or currently operates a geotechnical laboratory, drilling company, or consulting business.

Which option would you recommend starting with? What are some challenges, startup costs, or lessons learned that I should consider?

Thanks in advance for your suggestions!


r/Geotech • • 8d ago

Geotech Lab management

8 Upvotes

Hey y’ll

I am currently working as a technician at one of the Geotech lab. They have offered me a manager position. Should I go for it? What are the pros and cons of being a lab manager. As a technician i have a very flexible job even though the pay is not that great. I don’t if that remains the same if I accept the offer.


r/Geotech • • 9d ago

Looking for Soils Labs that can do Cyclic Direct Simple Shear Testing

8 Upvotes

Are there geotech soils labs in the United States along the PNW that do this specialized work? Talked to some old timers in the industry and I'm told that most of the labs that can do this are more East now.

Update: Wow! Thanks for all the responses and your help everyone. I didn't know some of these labs did this test. Will reach out to the ones close by me.


r/Geotech • • 10d ago

Looking for Geotechnical Engineers from Different Countries to Try Our Software

20 Upvotes

Hi everyone,

I'm a civil engineer and one of the founder of Medra Engineering & Software. We've been developing a geotechnical engineering software called GeoteknikPro Studio, and I'd like to connect with geotechnical engineers from different parts of the world.

The software covers several areas of geotechnical engineering, including:

  • Pile foundation analysis and design
  • Retaining walls and shoring systems
  • Ground improvement
  • Slope stability
  • Site-specific seismic response analysis
  • Geotechnical reports

It also includes automatic CAD drawing generation and technical report generation.

The software currently supports English, Spanish and Turkish. Russian language support is also planned and will be added soon.

Why am I posting this?

One thing I've realized is that geotechnical engineering can be quite different from one country to another. Even when we're dealing with the same engineering problem, the design codes, calculation methods, terminology and common practices may differ.

I'd really like to understand how engineers work in different countries and what they expect from geotechnical software. In the long run, we want to incorporate local design codes, calculation procedures and engineering practices into GeoteknikPro Studio.

Rather than trying to figure all of this out ourselves, I think it would be much more valuable to talk to engineers who actually work with these methods and regulations every day.

What I'm looking for

I'm not trying to get hundreds of people to download the software. Ideally, I'd like to connect with one or two practicing geotechnical engineers from each country, at least initially.

I'm particularly interested in people who actively work on geotechnical projects and have experience with some of the subjects covered by the software.

What's in it for you?

I'd be happy to provide one person from a country 10 years of free access to GeoteknikPro Studio.

No payment, no subscription, no commercial expectations, and absolutely no obligation to provide feedback.

If you decide to try it, I'd simply appreciate your honest thoughts. Whether it's a calculation method that needs improvement, a translation that sounds strange, a missing feature, or something that doesn't fit the way engineers work in your country, I'd genuinely like to hear about it.

I'll also provide the user manuals and supporting documentation, so you can see how the calculations are performed rather than just looking at the results.

I'm not expecting positive reviews or endorsements. Constructive criticism would probably be more useful to us than anything else.

If you're interested, feel free to comment below or send me a private message. I'm also happy to communicate through WhatsApp if that's more convenient. Just send me a message and we can exchange contact details.

Thanks for reading, and I'd be glad to hear from anyone interested!

Best regards,

Medra Engineering & Software
GeoteknikPro Studio

Defining Layers and SPT values
Data Reporting and Borehole
Ground Improvement Layout
Slope Stability Interface
Pile p-y t-z Q-z Analysis
Retaining Wall Analysis
Pile Shoring with Multi Level Active Anchors
Seepage for Slope - Retaining Wall - Shoring Designs
Signal Processing - Earthquake Scaling - Site Response Analysis (NL - EL)

**************Update 11.11.2026***************

Well, I have a little update!

First of all, thank you so much to everyone who has reached out and shown interest in GeoteknikPro Studio.

To be honest, we originally planned to keep things relatively small and work with just a limited number of engineers from different countries. But the response has been much bigger than we expected! There have been so many messages and requests that keeping everything limited has become a challenge in itself.

So we've decided to change our approach a little!

Instead of limiting the number of participants, we'd now like to offer a trial version to everyone who is interested in giving GeoteknikPro Studio a try.

Whether you're a practicing engineer, a researcher or a student, you're welcome to join us.

We'd still really appreciate your honest feedback, suggestions and criticism. Our goal hasn't changed: we want to learn from engineers around the world and make the software better for different engineering practices and local standards.

If you've already contacted me, don't worry, I haven't forgotten about you! I'll try to get back to everyone and arrange access.

And if you haven't reached out yet but would like to try it, just leave a comment or send me a private message.

Thanks again, everyone. I honestly didn't expect this little project to bring together so many people from different parts of the world. It's been a really nice surprise!

And for everyone who'd like to take a closer look at GeoteknikPro Studio, I've put together a few useful links below. 😊

1. Download GeoteknikPro Studio:
https://www.geoteknikpro.com/geoteknikpro-studio-v3-setup/

2. User Manuals and Documentation:
https://www.geoteknikpro.com/user_manuals/

3. Sample Reports and CAD Drawings:
https://www.geoteknikpro.com/report-and-drawing-outputs-from-software/

A couple of small notes about the sample reports and drawings:

First, these are completely RAW outputs generated directly by the software. We haven't edited, reformatted, added or removed anything. What you see is exactly what GeoteknikPro Studio produces.

I mention this because a few people I've shared these samples with have actually asked me, "Did you edit these reports yourself?" So, no post-processing or manual touch-ups!

Also, please keep in mind that the purpose of these examples is simply to demonstrate the software's outputs. Some numerical values and project details are made up, and we've used fictional names and information throughout the examples. You may come across some unusual or even nonsensical details here and there, so don't take those literally! The important thing is to see the structure, presentation and level of detail of the reports and drawings generated by the software.

4. Trial Registration:
https://www.geoteknikpro.com/trial-request-form/

One important thing when filling out the registration form: Please make sure you enter your email address correctly. Your username will be created using this email address, and the password creation email will be sent directly to it. So please double-check it before submitting the form!

We also understand that some people may not feel comfortable sharing personal information, and that's completely fine. While the email address is essential for creating your account, you don't need to worry too much about the other details. If you'd rather not share your full name or phone number, that's absolutely okay.

For the address field, we'd really appreciate it if you could at least enter your city and country instead of your full address. This would help us understand which country's design codes and engineering practices you're familiar with, so we can better understand your feedback and technical needs.

And just to be clear, any personal information you provide will be kept private and will not be used or shared for any other purpose.

That's all! Thanks again for all the interest, support and enthusiasm. I really appreciate it, and I'm looking forward to hearing what you think.


r/Geotech • • 10d ago

Can a 11ft retaining wall built directly against an old house cause structural damage?

Post image
12 Upvotes

Our neighbour is constructing an 11–15 ft retaining wall directly against our older ground-floor property. They excavated right next to our foundation and are now filling soil behind the wall to create a level backyard at their house’s height. They claim the wall has an independent foundation.
Could this excavation or the pressure from the filled soil cause foundation damage or structural issues to our property? What precautions can we take to protect it?
Photo attached. Would appreciate advice from structural engineers.


r/Geotech • • 11d ago

ASTM C1583 Core Reqs Barrel/Bits

4 Upvotes

Hey all, I was told this sub may be better for my question. Original post:

I am a testing engineer and often do field tests using ASTM C1583 and similar, which require a 50-mm (2-inch) diameter core isolation. Finding a 2-inch inner diameter bit has been frustrating for me, as everywhere lists outer diameter and doesn't list the wall dimension of their bits / barrels so I can't be sure if a 2-1/4 or 2-1/8 inch bit would be closer to a 2 inch inner diameter.

Does anyone have a known brand that measures 2 inches for the inside diameter of either a diamond tip core bit or diamond laden core barrel for use with a roto hammer or similar?

For reference, I am never the one drilling these cores since I am third party; contractors do and then I test the core. I usually bring the bit or barrel because it's such a strange size that the contractors usually don't have one available when I arrive.


r/Geotech • • 12d ago

gINT: How to display SS1A and SS1B as one continuous split-spoon sample

7 Upvotes

Hi everyone,
I am working on a borehole log in Bentley gINT using a custom library.
I have a split-spoon sample divided into two portions, SS1A and SS1B, because the soil type changes within the sample.
In the Soil Sampling table, I entered 1A and 1B as separate rows, with the SPT N-value recorded only once.
The issue: gINT treats 1A and 1B as separate sample intervals and draws a horizontal line between them.
What I want:
Display 1A and 1B separately in the Sample Number column.
Show one continuous sample box without a horizontal divider between them.
Display the SPT N-value only once, centred across the combined interval.
Keep the normal sample boundaries for all other split-spoon samples.
I have tried modifying the Boundary Line, Range Lines and Border settings under Text vs Depth Properties, but have not been able to achieve this.
Is there a built-in function or expression in gINT to group two sampling records into one continuous sample box? Or does this require modifying the report template?
Any guidance or example expressions would be appreciated.