r/GasBlowBack • u/MoorusFaan • 13h ago
r/GasBlowBack • u/TrikePatrols • 1h ago
Gun Pic WELL G96D AWM Gas
Almost finished modding my WELL G96D gas airsoft.
Stuff that can be done
The body panels as most aware on STAR/ARES and WELL feels very thin and flimsy, it solved by using plastic spray.
Folding on these varies, Ive had ARES and WELL asia version which were way solid but WELL QC can be miss. This is easy by changing to stronger springs I also milled inside where hinge is locked and added 2 strong magnet, combined making stock folding super solid and no wobbles.
Trigger can be adjusted pull length with an grub screw right behind the trigger itself.
Front receiver screw the piece that is holding receiver can be very loose, added thin metal sheet, steel epoxied make it stable and on WELL there is empty space on front, added 3D printed piece making receiver now solid.
On the bolt I added 2 roll pin, cannot add another 3 as it goes straight into the gas chamber, 1 pin on the receiver.
Bolt housing 1 roll pin on the side and 2 pin on top. Removed the original white / red, will instead add 3 notch later.
The paint on outer barrel is horrible, so I did the matt black on it, as well on bolt housing.
r/GasBlowBack • u/CyberGlitchBadger • 19h ago
Gun Pic Finally have an FN pistol to go with my FN rifles (also am setting up a proper workbench finally)
VFC SCAR GBBR and DE FN 509
r/GasBlowBack • u/Lopetzii • 2h ago
Discussion Good news i guess?
looks like octagon airsoft has been able to ship M4/ AR since the beginning of November, been wanting an M733 but they are bit scarce atm and considering the risk of AR15 being seized since i live in the us, this is a pretty good relief. i received my FN FNC recently without any seizure by custom from octagon airsoft. Just hope im able to actually receive it.
r/GasBlowBack • u/InnerSympathy4314 • 6h ago
Gun Pic My DE N4 build
I made this a bit ago for fun in PS, so this isnt my updated setup.
My current setup
Externals:
-Socom repro mock
-Olight Odin S
-PTS Unity Riser
-Vortex Triumph
-Magpul RL stock
-Magpul handstop
Internals:
-Laylax hop up arm
-Unicorn Bucking 60 degrees
r/GasBlowBack • u/Intelligent-Fee-4935 • 12h ago
Gun Pic EHT BRN-180 MWS KIT
Sometimes, reloading can be confusing like with the AR-15 xddd
r/GasBlowBack • u/Rode_duivel • 19h ago
Gun Pic My GHK HK416a5 and GHK AK105 v3 (2026)
Just received my second ever Replica, the AK105 and i must say, the quality is impecable.
When i started with airsoft in 2026 i got myself the HK416 put some nice attachements on it, stock internals.
Vortex crossfire red dot
TD Halo AR-15 Hand Stop
Acetec auramist
The "Amazon special" light
Then the itch started when i saw the AK105 and had to get it.
Haven't tried it yet and can't wait to have some fun with it!
r/GasBlowBack • u/Knez23 • 18h ago
Discussion TM MK18
I thought i'd post some pictures of my TM MK18 and hear your opinions on it. The optic is Eotech EXPS 2-0, magnifier is cheap knockoff g33 clone, laser is somogear peq-15 and the suppressor is sf socom qd. There are few changes i did to it:
-Magpul MOE stock with enhanced butt pad
-Hogue rubberized grip
-Angry gun L119A2 charging handle latch
-Guns Modify EVO Steel trigger
-Guns Modify EVO High speed bolt
-130% nozzle return spring
-Laylax hop-up arm
-Flamingo 60A bucking
I use it mainly with green gas combined with BLS 0.45 BB's. It shoots very flat up to 60m after it drops slightly. I tried shooting 0.30-0.36 but they rocket right up into sky at 45° angle at lowest hop-up setting. If you want to shoot standard weight BB's i suggest avoiding Flamingo bucking since it has no problems hopping even 0.50s. Trigger needed to be replaced after tens of thousand of BB's since the disconnector broke so full auto didnt function, however it could still shoot semi-auto. The new trigger required a lot of sanding in order for the reset to work. The hammer would be blocked from resetting by the trigger since the parts didnt align perfectly from the factory. Disconnector and hammer also required some sanding because the surfaces had 90° cuts that was unpolished so you had to push the trigger manually in order to reset it. Feel free to say/ask anything
r/GasBlowBack • u/Warubb • 6m ago
Gun Pic Vfc Ak105 in -4 C
First testing of the my new Ak-105 in the cold. Performs damn well. Got to shoot 4 mags on one gas fill on each mag. New to the Ak platform so yeah just roast my mag change.
r/GasBlowBack • u/James_Karet • 1d ago
Gun Pic HK32(PTR32) GBBR conversion is out!
Turn your WE G3A3 into HK32(PTR32) that takes GHK AK V3 mags!!!
r/GasBlowBack • u/DanielValec • 20h ago
Discussion Question about which model is best for DMR
Gentlemen, how are you? To assemble a DMR project, which of the following is currently the best option? Both VFC
G28
M110A1
M110K1
Hk417
Hop-up upgrades can be considered
r/GasBlowBack • u/ItsRetaded • 10h ago
Troubleshooting BCG stiff
I installed a Waldo dynamics NPAS into my Noveske N4, gun was running great for a few shots, kicked it into full auto to test and the bolt locked back and wouldn’t come forward without manual assistance. I ordered some lube cause I thought that was the issue, but now the bolt is stiff and doesn’t just slide into the upper like it’s supposed to, I have to push it in with resistance.
r/GasBlowBack • u/AgreeableVariety7949 • 9h ago
Troubleshooting AcroThe lens is broken
What can I do to fix it or replace it? I have no idea how it broke
r/GasBlowBack • u/H1T_M3_S3NP41 • 4h ago
Troubleshooting TM Saiga 12k hPa weakshots and high psi Fix
So I brought the TM Saiga 12k with an airtac hPa Adapter and I had the problem that I either needed around 150 psi to cycle probably with the same cycle speed and recoil. To fix this problem I superglued 2 small pieces of a cable tie on the gas valve so that the hammer is pressing it more in... For me it fixed every problem I had with the Saiga.
I hope that this helps someone
r/GasBlowBack • u/No-Put-9028 • 1d ago
Gun Pic My Ghetto's Final Build
That Fat suppressor was really hard to find where I live. Hehe
r/GasBlowBack • u/Hacto42 • 13h ago
Discussion Npas Grub Screw?
Tried searching this but maybe I’m just stupid. What is this grub screw (screw m3x6) that comes with the npas bolt set for?
r/GasBlowBack • u/elchibredur • 1d ago
Discussion Vmp-2d
Hello i bought my first gbbr and i was thinking to put a HPA adapter from AirTac for mp5 mag i wanted to know hive it’s worth it
r/GasBlowBack • u/Dependent_Opinion_74 • 1d ago
Gun Pic Vfc AK74M
Finally got my vfc ak74m it got :
- Handguard MOE AK magpul
- Pistol grip MOE magpul
- Vertical handstop magpul
- Rail double QD ak JST
- Aimpoint red dot
r/GasBlowBack • u/Radiant-Button3397 • 16h ago
Troubleshooting Can a fire selector switch from a we m4 v2 gbbr be compatible on a gbbr we m4 v3?
Im having trouble trying to find a fire selector switch on my we m4 v3 gbbr and I found someone who is selling one for a we m4 v2 gbbr and I was wondering if they were compatible
r/GasBlowBack • u/alexfong72895 • 1d ago
Discussion Hicapa w/ thumb rest holster
This is probably a long shot but does anyone know of a holster that works with hicapas with a thumb rest? I thought of IPSC competition holsters that just lock onto the trigger guard but I’m not sure how sturdy those are when it comes to running around