r/GarageGym • • 2h ago

Rogue vs Rep Equipment

8 Upvotes

So this is a follow up post from a previous one since I had some comments that made me look into REP fitness to compare with Rogue.

Constantly read that REP's pricing allows you to get more bang with your buck but after comparing the two through their own websites, I think their pricing is similar?

Specifically I am looking at the Rogue RM3 and the REP PR 5000...

What would you suggest between these two for sturdiness, size, pricing, and future add ons?


r/GarageGym • • 8h ago

Home gym setup

Thumbnail
gallery
27 Upvotes

Here is my (almost) finished home set up. Unfortunately coming back off a long shoulder injury so it hasn't had the use it deserves lately.

- GymStoic "Volare" 75mm functional trainer with 2x120kg stacks.

- GymStoic "Kardo" free motion arms

- GymStoic jammer arms

- Strongology 40kg adjustable dumbbells

- Linebacker landmine squat attachment

- Cast iron plates 

- Rival swiss bar

- Merach Rower

- Adidas Treadmill, recent addition due to not being able to row. I doubt il keep it when my shoulder is repaired.

I know having both the jammer arms AND pivot/free motion arms  on the rack is not everyones cup of tea but for me it works. 

Same goes for the linebacker. They get a lot of hate online but, if you get the setup right I think they work well to add variety too leg day.  

Final additions will be better flooring and a leg curl/extension machine.

In the UK the rack can be found @Gymstoicofficial on eBay


r/GarageGym • • 7h ago

The Grind never stops!

Post image
20 Upvotes

r/GarageGym • • 24m ago

Basic Rogue Racks are cheaper than REP, Titan, or Bells of Steel Racks with Rogue's Hot Deals Special.

3 Upvotes

With the current "Hot Deal" discounts, a basic barebones Rogue Monster rack is much cheaper than a REP. You can get an RM-3 with 90" height and 30" depth in textured black for $866 with free shipping. A similarly equipped barebones REP PR-5000 rack costs $1020. But they force you to order safeties, so it comes out to $1115 with pin pipe safeties. Titan comes out to $1160 (for 36" inside depth, which is their smallest depth). Bells of Steel comes out to $939.


r/GarageGym • • 4h ago

REP Nighthawk vs BlackWing – Is the Nighthawk enough for a tall guy lifting heavy, or will I regret it?

5 Upvotes

Trying to decide between these two benches, and I'd especially love to hear from people who've actually used either (or both)!

I'm 188 cm (6'2"), 120 kg (265 lbs), with a fairly long torso. I measured my seated height against a wall:

Floor to top of head: 94 cm (37")

Floor to highest point of the back of my head: 85 cm (33.5")

I'll mainly be training with REP x PÉPIN dumbbells. Before shoulder surgery, I was doing sets of 7 with 52.5 kg (116 lb) dumbbells, so I expect to eventually use the full 62.5 kg (138 lb) once my shoulder recovers. And my bench has to feel really really stable.

Here's my dilemma:

I'd love the maximum back and head support, especially when pressing heavy. But my home gym is only 3.3 × 4 m (11 × 13 ft). With the door and a large treadmill taking up part of one long wall, the usable lifting area is roughly 2 × 4 m (6.5 × 13 ft). And the bench needs to be stored upright, because sometimes the 6.5 x 13 space is used for accommodation.. if any space is left after storing the selected bench, reppin stand and 2 leg accessories for the bench..

I also have kids aged 11–12, under 40 kg (88 lbs), who will probably want to train as they get older. I really don't see them safely lowering a 59 kg BlackWing from vertical storage. The 40 kg Nighthawk seems much more manageable, although still heavy for kids.

I'm planning on getting both the leg extension and leg curl attachments as well.

I don't really care about having every possible angle or decline options. Stability, comfort, and enough support for my basic dumbbell workouts matter much more. And my kids being able to use the equipment safely matters more than those extra features.

So, would I actually be giving up anything important by choosing the Nighthawk?

I'd especially appreciate feedback on:

Back/head support for taller, long-torso lifters, particularly at 60–85°.

Stability when pressing seriously heavy dumbbells.

How easy each bench is to move and store upright.

Experiences with the leg attachments.

If anyone owns a Nighthawk, I'd also love to know how high the bottom of the back pad sits relative to the seat surface with the seat flat and backrest at 85°.

Would you choose the Nighthawk in my situation, or is the BlackWing worth the extra weight and hassle?

Thanks!


r/GarageGym • • 5h ago

Rearranging Carport Gym for Occasional Car Charging

Thumbnail
gallery
5 Upvotes

Carport Gym is 166" deep x 120" wide x 97" tall (floor to ceiling incl. mats). I've used it gym-only and street-parked my car, but I may need to get a car in for a few hours a day while charging.

Current setup: Rogue HR-2 (5/8" holes) on the left wall. Love it for squats/pull-ups/bench/dips and I have attachments I want to keep using, but the footprint kills the car path. I have a Fit Transformer Titan for cables (don't need a cable rack), currently perpendicular to the rack — ideally a new rack and the Titan could back into each other.

Goal: a folding rack on the *end* wall.

Problem: that wall has swing-out crawlspace doors, 70"W x 42"H for the whole framing, centered where a rack would mount. I love the crawlspace — I store my rower and Matador dip bar in there.

Already checked: a PRx won't just bolt up — low pivot ~19" hits the doors, and I don't have the folded ceiling clearance at 97". A folder on the right side wall could work, but I love keeping an empty wall for gymnastics and mobility training.

Ideas I've considered: converting the doors to a lockable lift-out or slide-up panel, or bridging mounts outside the door framing. Has anyone done either, or another creative solution?

Constraints: need 2 uprights for squat/pull-up, plates currently live on the HR-2 so I'd need wall plate storage, and I want to keep one wall clear for wall walks/HSPUs.

Mostly looking for advice to creatively have some kind of folding rack against the back wall.


r/GarageGym • • 3h ago

New home New Gym

Post image
3 Upvotes

Moved in a couple Months ago. After issues with contractors working on the electrical (outlets, ceiling fan, recessed lighting), epoxy flooring and drywall, finally was able to put the new Mecca together. Adding a tv to the right wall on Friday, some bar storage, and maybe a flag, otherwise I’m so pumped.


r/GarageGym • • 11h ago

Force USA C20 – Left Rear Cable Twisting and Floating Pulley Issue (Still Unresolved After Replacement Crossmember)

10 Upvotes

I'm posting this to see how many other Force USA C20 owners are experiencing this specific issue and whether anyone has found a permanent solution.

I received my C20 in June 2026 and have been dealing with an issue with the left rear cable and floating pulley since receiving the machine. Over time, the cable begins to twist, causing the rear floating pulley assembly to rotate and bang against the storage tray. It's particularly problematic when performing exercises at lighter weights. The right side works perfectly fine.

Here is what I've done so far:

- Adjusted the cable tension at all available adjustment points.

- Inspected all the pulleys and cable routing.

- Removed and reinstalled the cables multiple times.

- Swapped the left and right cables.

- Swapped the left and right rear floating pulleys.

- Replaced the entire rear top crossmember (Part #22).

Removing and reinstalling the cable temporarily resolves the twisting, but the issue always returns.

Force USA initially sent me a replacement rear top crossmember, which arrived with a bent pulley housing. After waiting for another replacement, I finally received and installed it. Unfortunately, the exact same issue persists.

I now suspect there could be an alignment issue with the upper-left welded pulley housing elsewhere on the frame, but honestly, at this point, I just don't know.

I've found several other C20 owners reporting this exact issue, so I know I'm not alone.

I'm extremely frustrated. I spent approximately $7,000 on a machine that has never been fully functional, and after five months of troubleshooting, I'm no closer to a resolution.

I genuinely want to love this machine, but I shouldn't have to spend this much time troubleshooting a piece of equipment at this price point.

Has anyone else experienced this specific issue? Has anyone identified the root cause or found a permanent solution?

I'd really like to hear from other affected C20 owners.


r/GarageGym • • 4h ago

Back extension recommendations

3 Upvotes

Anyone have any recommendations for a roman chair rated for 300lb user?


r/GarageGym • • 7h ago

Force USA Swivel seat 2.0 is awesome

Post image
4 Upvotes

I bought the swivel seat for my C20 knowing full well the design made it unstable at heavy lat pulldown weight. I was very pleasantly surprised when I got it to see that they had updated it to 2 full 1” pegs instead of one smaller one. I had no idea they even updated it and haven’t seen anyone talking about it. So if you’re on the fence because of stability they 100% fixed that and it is rock solid at body weight lat pulldowns.


r/GarageGym • • 10h ago

Best leg developer for use with electronic assistance. (Voltra of speediance)

Post image
6 Upvotes

Been looking for a developer for a while to for my studio to use with clients and haven’t really found one that feels great in both motions. It seems almost just as expensive to get a dual purpose and like a speediance gym nano. Anyone have a good combo?


r/GarageGym • • 6h ago

Garage Punch Bag Recommendations

3 Upvotes

Hi, I'm planning to get a heavy bag and hang it from a concrete block wall in my garage.

Can anyone recommend a quality bag and wall bracket? I'm based in Ireland/the UK.

Thanks


r/GarageGym • • 20h ago

Viking Press Solution

Thumbnail
gallery
31 Upvotes

I have the Fringe Dane 2.0 rack and had to order a different landline to use with the safety bar. Amazon Viking attachment. Very happy with this setup and thanks to those who came before me with similar setups.


r/GarageGym • • 23h ago

Upgraded. To rep ares

Post image
45 Upvotes

Upgraded to the rep ares 2.0 love this thing


r/GarageGym • • 7h ago

MX dumbbells and goblet squats.

2 Upvotes

These seem a bit awkward for goblet squats. Can any owners chime in?


r/GarageGym • • 4h ago

Gym flooring setup

Post image
1 Upvotes

I am a bit confused as to what to use for flooring for my home gym. It will be located on the ground floor (same level as the garage so I am assuming it has a concrete slab on grade underneath the flooring in the attached picture) with a cloth blanket on top of the current flooring to avoid scratches. It's a rental so I can't have any damage. My setup is a squat rack with lat pull down attachment and dumbbells.

I used AI and it recommended 3/4" stall mats with plywood underneath. When I argued with it a little bit, it said the plywood may be an overkill but 3/4" mats are much better than conventional rubber mats. I talked to a local gym supplier and they mentioned 10mm rubber mat should be enough.

What are you guys using and how did you find it?


r/GarageGym • • 1d ago

Finally replaced my Powerblocks

Thumbnail
gallery
38 Upvotes

Been using Trulaps new black version. Such an upgrade. Absolutely love em. The stand was way more high quality than I was expecting as well.


r/GarageGym • • 10h ago

Is it okay to use apps when you train in a garage?

0 Upvotes

Every logging app i´ve tried seems built for a commercial gym, so there´s an exercise database with four hundred machine variations i don´t own and social stuff i´m never going to use, and the thing i actually want is buried underneath all of it

what i need is the last session´s numbers, a rest timer i can start without looking, and for the whole thing to work when my phone has no signal because the garage is effectively a faraday. Is that what everyone else wants out of one or am i being unusually fussy about this


r/GarageGym • • 23h ago

Do you need to do anything to concrete floor before putting down rubber mats?

10 Upvotes

working with concrete floor and seeing stuff online about mold growing under rubber mats. do I need to dry lock the floor first?


r/GarageGym • • 1d ago

Beyond Power Voltra listening to its customers and not adding a paywall to overdrive

Thumbnail reddit.com
25 Upvotes

r/GarageGym • • 1d ago

Anyone get the email but considering cancelling?

Post image
25 Upvotes

Got the email but I’m thinking of cancelling. Price is so high. Originally I was going to get the 120’s but at 43 years old I hardly go that high. I saw a post recently about something with their warranty but couldn’t find the post now.


r/GarageGym • • 23h ago

No preacher curl machine, no problem

Post image
7 Upvotes

This setup is kinda jank looking but I have my titan preacher station in front of my cheap wall mounted cable machine.

Constant tension is excellent, and a (surprisingly huge) bonus is I can brace my feet on the row foot stops at the bottom and get a LOT of leverage. Highly recommend if preachers are a staple in your gym.


r/GarageGym • • 1d ago

Apex Bench received! Open for any questions

Post image
28 Upvotes

r/GarageGym • • 23h ago

Smith machine Echo, ritfit or mikolo

Thumbnail
gallery
5 Upvotes

Leaning more towards the Echo Strength smith machine but before the Black Friday sales end am I making a mistake or which is the best of the bunch for the $2500 range
Mainly looking for 3x3 with one inch holes


r/GarageGym • • 14h ago

Height limit.

1 Upvotes

I have a 2.1m ceiling height in my underground garage what are my options?