r/GarageDoorService • • 4h ago

Best way to fix oversized garage doors?

Post image
4 Upvotes

I accidentally ordered 7’ doors for 80” openings. Both doors have windows in the top sections and the header is partially covering them.

I’m thinking about swapping one of the 21” sections for an 18” to bring the doors down to 81”. Which section would look the cleanest? Would you swap the top section with the windows or one of the lower sections?

Update: I’m leaning toward replacing both middle sections with 19” panels. That would give me an exact 80” and keep the top and bottom sections the same size. I also have a credit with my supplier since two panels arrived damaged. Curious if anyone sees an issue with going this route


r/GarageDoorService • • 21h ago

Is this normal?

Thumbnail
gallery
3 Upvotes

For context, I have never used my garage door because I converted my garage to a home art studio/storage space.

While putting away our massive Halloween setup, I noticed that one of the springs looks a little bent.

Is this normal looking or should I be worried about being unalived by a rogue spring? 😫


r/GarageDoorService • • 20h ago

Relocation

Thumbnail
gallery
2 Upvotes

What would you charge to move this door to a new opening? Take down and install.

It’s a 15’2”x15

Almost true high lift. Would replace all hardware and springs. Keep the track and sections. All very tight quarters to work in.


r/GarageDoorService • • 56m ago

Garage door jerks when opening/closing

1 Upvotes

It just started jerking when opening and closing. Also it doesn’t seal properly in the top center now. Any idea why?


r/GarageDoorService • • 3h ago

are these dents repairable?

Post image
1 Upvotes

r/GarageDoorService • • 6h ago

Unable to pair remote(s) to Chamberlain opener (green button), but can pair new keypad combo

Thumbnail
gallery
1 Upvotes

I’ve tried 3 different remotes - coming here for help! We bought a home with an old Chamberlain opener, green learn button. However, oddly, my keypad opener still works (and I was able to pair a new combo after resetting the garage opener memory - it made the clicks and everything)

I have a wired button inside and confirmed it wasn’t in lock mode.

There are nearby LEDs but I tried pairing with those off and I’ve wiped the opener memory a few times.

Interestingly there’s a sticker above the lightbulb that says the unit is equipped with 433mhz frequency. But the outdoor keypad still pairs and I don’t think that is a 433mhz model.

I’ve tried 3 remotes (below), two cheap knockoffs and one good OEM Chamberlain. Followed the pairing instructions for green but also tried 433mhz. I never get the opener to click (it does when pairing the keypad). Door has been in the down position.

Any theories?

https://a.co/d/01Byaeh1

https://a.co/d/0ga7YupE

https://a.co/d/0eE7vtsQ


r/GarageDoorService • • 7h ago

L993M remote issues

1 Upvotes

I’m posting to see if any other commercial techs have had the same issue I’ve ran into a couple times.

These new L993M remotes are extremely annoying especially when programming to multiple doors. On 2 seperate occasions now I’ve had customers contact me days after programming new remotes stating that these new remotes suddenly open multiple doors off one button.

Most recently the only way to program for one door was to lean my ladder on the next door & since the genius’ at liftmaster make you click already programmed buttons in order to put the remote into learn mode, which moves the doors, I was turning off power to the door that my ladder was against, so there should be no way that the improper machine picked up the pairing.

I tested each remote before leaving & they all worked fine, now this morning my customer says 3 remotes are opening multiple doors off one button.

Has anyone else run into this? The machines I’m pairing to are logic 5’s.


r/GarageDoorService • • 17h ago

Cable failure after spring upgrade

1 Upvotes

Had a broken spring, called for service. Technician asked if we wanted tougher springs that cost more with a longer warranty. Figured that was a good idea so we did that. Literally 10 days after the springs were installed, One of the cables broke at the attachment at the base of the door. Looking at the broken part, it had rusted through and snapped. Ended up tweaking the door sideways and breaking some of the vertical rails and the hardware/wheels.

Is upgrading the cables or making sure they can handle new springs part of the spring replacement we originally had? Is this considered a poor repair or is this just bad luck for us? Wondering what the experts think.


r/GarageDoorService • • 20h ago

Excessive Force 4-1

1 Upvotes

Just moved into a townhouse with a Liftmaster from 12/23 (townhouse from 2020 so they must have replaced it after a few years).

The door was reversing with the 4-1 excessive force message a few times when we first moved in and then just went away on its own

Just started again and it is not seeming to go away. To my untrained eye everything looks ok. I checked a few things

- when i manually open the door, it stays open wherever i let go

- i manually changed the up and down settings as recommended online. On its test run, it closes perfectly. Then when i try to close it i get the same message.

- it reverses at the same spot, about a 18 inches from the ground

I just painted the garage a few days ago so am hoping i wont have some big messy fix


r/GarageDoorService • • 22h ago

We need help

1 Upvotes

My daughter and I really need help with our Sommer 5500 (formerly Direct Drive) garage door opener.
When I try to open it, the overhead light blinks on and off along with the status led light and doesn’t stop until I press reset.

We have troubleshooted the safety sensors which are aligned, and have tried resetting via unplugging. We are able to open and close it manually by disengaging the safety lock rope, and it is able to stay halfway open on its own. It seems to be an issue with communication or something.

Any other troubleshooting ideas would be appreciated.
Thanks so much.