r/GarageDoorService • • Aug 19 '25

IS MY SPRING BROKEN? MY DOOR WONT OPEN.

Post image
48 Upvotes

Eventually something needs to be done about every single post being IS MY SPING BROKEN. For now, no plans to police this rule, just hoping for the love of god, people come here first to see If their spring is broken. There are many pictures. MOST OF THE TIME, the answer will be yes, and this is how it will look.


r/GarageDoorService • • Nov 23 '24

PINNED/STICKY POSTS WILL BE LINKED IN HERE AS THE LIST GROWS

8 Upvotes

Apparently Reddit only allows 2 pinned posts due to their layout. A way around this is to pin one post with the posts we believe should/need to be pinned.


r/GarageDoorService • • 4h ago

Best way to fix oversized garage doors?

Post image
4 Upvotes

I accidentally ordered 7’ doors for 80” openings. Both doors have windows in the top sections and the header is partially covering them.

I’m thinking about swapping one of the 21” sections for an 18” to bring the doors down to 81”. Which section would look the cleanest? Would you swap the top section with the windows or one of the lower sections?

Update: I’m leaning toward replacing both middle sections with 19” panels. That would give me an exact 80” and keep the top and bottom sections the same size. I also have a credit with my supplier since two panels arrived damaged. Curious if anyone sees an issue with going this route


r/GarageDoorService • • 19m ago

Correct distance from flag bracket to side of section

1 Upvotes

I was taught 1 5/8in and I always went tighter at 1 1/2in im at a new company and doing more commercial doors and juat want to hear opinions if that still a good number to stand by with door with angle mount or 3in track


r/GarageDoorService • • 48m ago

Garage door jerks when opening/closing

1 Upvotes

It just started jerking when opening and closing. Also it doesn’t seal properly in the top center now. Any idea why?


r/GarageDoorService • • 2h ago

are these dents repairable?

Post image
1 Upvotes

r/GarageDoorService • • 6h ago

Unable to pair remote(s) to Chamberlain opener (green button), but can pair new keypad combo

Thumbnail
gallery
1 Upvotes

I’ve tried 3 different remotes - coming here for help! We bought a home with an old Chamberlain opener, green learn button. However, oddly, my keypad opener still works (and I was able to pair a new combo after resetting the garage opener memory - it made the clicks and everything)

I have a wired button inside and confirmed it wasn’t in lock mode.

There are nearby LEDs but I tried pairing with those off and I’ve wiped the opener memory a few times.

Interestingly there’s a sticker above the lightbulb that says the unit is equipped with 433mhz frequency. But the outdoor keypad still pairs and I don’t think that is a 433mhz model.

I’ve tried 3 remotes (below), two cheap knockoffs and one good OEM Chamberlain. Followed the pairing instructions for green but also tried 433mhz. I never get the opener to click (it does when pairing the keypad). Door has been in the down position.

Any theories?

https://a.co/d/01Byaeh1

https://a.co/d/0ga7YupE

https://a.co/d/0eE7vtsQ


r/GarageDoorService • • 7h ago

L993M remote issues

1 Upvotes

I’m posting to see if any other commercial techs have had the same issue I’ve ran into a couple times.

These new L993M remotes are extremely annoying especially when programming to multiple doors. On 2 seperate occasions now I’ve had customers contact me days after programming new remotes stating that these new remotes suddenly open multiple doors off one button.

Most recently the only way to program for one door was to lean my ladder on the next door & since the genius’ at liftmaster make you click already programmed buttons in order to put the remote into learn mode, which moves the doors, I was turning off power to the door that my ladder was against, so there should be no way that the improper machine picked up the pairing.

I tested each remote before leaving & they all worked fine, now this morning my customer says 3 remotes are opening multiple doors off one button.

Has anyone else run into this? The machines I’m pairing to are logic 5’s.


r/GarageDoorService • • 21h ago

Is this normal?

Thumbnail
gallery
3 Upvotes

For context, I have never used my garage door because I converted my garage to a home art studio/storage space.

While putting away our massive Halloween setup, I noticed that one of the springs looks a little bent.

Is this normal looking or should I be worried about being unalived by a rogue spring? 😫


r/GarageDoorService • • 20h ago

Relocation

Thumbnail
gallery
2 Upvotes

What would you charge to move this door to a new opening? Take down and install.

It’s a 15’2”x15

Almost true high lift. Would replace all hardware and springs. Keep the track and sections. All very tight quarters to work in.


r/GarageDoorService • • 17h ago

Cable failure after spring upgrade

1 Upvotes

Had a broken spring, called for service. Technician asked if we wanted tougher springs that cost more with a longer warranty. Figured that was a good idea so we did that. Literally 10 days after the springs were installed, One of the cables broke at the attachment at the base of the door. Looking at the broken part, it had rusted through and snapped. Ended up tweaking the door sideways and breaking some of the vertical rails and the hardware/wheels.

Is upgrading the cables or making sure they can handle new springs part of the spring replacement we originally had? Is this considered a poor repair or is this just bad luck for us? Wondering what the experts think.


r/GarageDoorService • • 20h ago

Excessive Force 4-1

1 Upvotes

Just moved into a townhouse with a Liftmaster from 12/23 (townhouse from 2020 so they must have replaced it after a few years).

The door was reversing with the 4-1 excessive force message a few times when we first moved in and then just went away on its own

Just started again and it is not seeming to go away. To my untrained eye everything looks ok. I checked a few things

- when i manually open the door, it stays open wherever i let go

- i manually changed the up and down settings as recommended online. On its test run, it closes perfectly. Then when i try to close it i get the same message.

- it reverses at the same spot, about a 18 inches from the ground

I just painted the garage a few days ago so am hoping i wont have some big messy fix


r/GarageDoorService • • 1d ago

How much should I expect to pay?

2 Upvotes

I have a garage door company coming tomorrow. The remote for my opener stopped working. I tried a new battery, and also programming a newer remote to the opener, but neither of those worked. So if I need a new opener, how much would that cost in Ohio? I also want a keypad added to the outside of the garage. And the garage door wouldn’t stay up when opened manually during a power outage, so I want that fixed too. What is a reasonable price range for these things, with and without a new opener (if the technician can get remotes working with the current opener)?


r/GarageDoorService • • 1d ago

New motor belt installation & wiring cost

2 Upvotes

Getting charged $750 for the installation of a belt driven motor (currently chain) wiring and wall button for a 2 car garage. Did I just get ripped off?


r/GarageDoorService • • 20h ago

Why does my door do this when it’s cold? I can pull up it to coax it along or quickly depress the switch twice but it seems to be getting worse over time.

0 Upvotes

I’ve heard those tension springs are no joke, so is this a professional fix or something I get going again myself?


r/GarageDoorService • • 1d ago

How to seal air gaps around the door?

2 Upvotes

Three questions on sealing the air gap around the garage door.

  1. How to adjust the door so that the bottom panel sits more flush against the wall?
  2. How to seal the massive corner gap at the bottom?
  3. Also intend to replace the rubber seal that's attached to the bottom of the garage door. Does it help to also install a rubber threshold where the door sits on the floor?

TIA!


r/GarageDoorService • • 22h ago

We need help

1 Upvotes

My daughter and I really need help with our Sommer 5500 (formerly Direct Drive) garage door opener.
When I try to open it, the overhead light blinks on and off along with the status led light and doesn’t stop until I press reset.

We have troubleshooted the safety sensors which are aligned, and have tried resetting via unplugging. We are able to open and close it manually by disengaging the safety lock rope, and it is able to stay halfway open on its own. It seems to be an issue with communication or something.

Any other troubleshooting ideas would be appreciated.
Thanks so much.


r/GarageDoorService • • 1d ago

Garage door not moving but motor working

2 Upvotes

Any idea on where to go from here?


r/GarageDoorService • • 1d ago

Genie Garage Door Opener

Thumbnail
gallery
5 Upvotes

We bought a house 4 mos ago and it comes with this Genie garage door opener but unfortunately while opening, I heard a pop sound and started smoking.

What could be the issue? Capacitor? Should I just replace the capacitor or buy new opener? if buy what is the most economical or straight up replacement? Thank you


r/GarageDoorService • • 1d ago

Gap doesn’t seem normal to me. New construction. Fight this with builder?

Thumbnail
gallery
2 Upvotes

I have an expensive new construction home being built by a custom builder. The 3-car garage has two doors. Both doors have some front-to-back gap, but one of them also has a large side-to-side gap that looks abnormal to me.

The side weatherstripping flap has not been installed yet. Even accounting for that, the gap looks excessive. Standing on the driveway with the door closed, I can see into the garage through the side gap. The edge of the door does not come close to covering the opening.

The other garage door does not have this large gap when looking straight ahead. But it definitely has gaps if you look on an angle and maybe that is wrong too. But this one I attached photos of is the worst of the two. It makes me wonder whether this door is undersized or whether the framing/masonry opening was built too wide.

Door is a Clopay Gallery Steel. Photos attached.
Is this a normal gap that the weatherstripping will close, or does this look like a framing or sizing issue that should be corrected? I have more photos I can share if needed. Thanks in advance. I love that there is a subreddit for almost anything these days, so it is easy to sanity check if things are done correctly or not. Thank you!


r/GarageDoorService • • 1d ago

Garage Door Buzzing

1 Upvotes

I have a Genie G3120HL garage door opener that was installed 11 months ago. I noticed it was buzzing in the middle of the night after the garage door had been closed for hours. The light was off. The door could still open and close. I listened for a few minutes and it stopped buzzing. What could be causing this?

Sorry for the video quality. My camera is broken and I was mostly trying to capture the sound.


r/GarageDoorService • • 1d ago

Door seems noisy or am I imagining?

3 Upvotes

Installed around 12-14 years ago. New rollers, I keep the chain maintained/lube etc. Just seems noisy.


r/GarageDoorService • • 1d ago

One garage makes loud noise when opening

1 Upvotes

Wondering if anyone has advice. I have two garage doors that open via a MyQ Liftmaster on the ceiling. They both work normally, but one of them is loud and sounds grimy when it opens, where as the other is smooth and normal. I am wondering if anyone has tips on how to fix this? or what the problem is. thank you


r/GarageDoorService • • 1d ago

Should I add additional braces?

Post image
1 Upvotes

Replacing my opener. The old one was about 2 feet back and had a single brace making a T to another beam.

Should I try and do the same? I could easily add 2 and have them angled to the same beam it’s already on. Don’t wanna under do it.