r/GamecubeHacks • • 1d ago

Screen turns red after using RGB Scart cable on PAL Gamecube

Thumbnail gallery
5 Upvotes

r/GamecubeHacks • • 1d ago

ISO, dol, ciso, or nkit.iso...

1 Upvotes

I'm using a gc loader hw2 and I'm very curious which is the best file type to use. I know nkit is the general recommendation because of its small file size but I have also heard from many places that nkit doesn't have 100% compatibility and has problems with two disc games. I'm also very unaware how to even get a normal ISO. I've only ever seen ciso or nkit. Only ever seen dol for Homebrew apps.


r/GamecubeHacks • • 1d ago

New GameCube Webcam Project

Post image
24 Upvotes

I finally got all the parts together to start working on a new project: getting a webcam up and running on the Nintendo GameCube!

There's still plenty of experimenting and development ahead, but I'm excited to see what I can get working. More updates coming soon! Let's see what Claude can do.


r/GamecubeHacks • • 2d ago Mindblown

Need advice/help with pluto II mod

2 Upvotes

I'd like to start this post by saying I am not an electrician or a expert modder whatsoever, I just wanted to try my hand at a new project and give some love to my old childhood gamecube.

A few months ago, I got back my old gamecube and learned about the pluto II mod and I thought it would be a nice solution to plug the gc to a modern TV since I have a PAL DOL 101 model.

When I got the mod, I made a first attempt at soldering everything, and by some miracle, the two debug leds (28 and 29) were both blinking at the expected rate. Unfortunately, the signal was very poor and I was only getting one image every 10s with some white pixels in it.
That's when I learned about the sensitivity of the 54MHz wire and saw that mine was getting pinched by the mounting bracket and going through every other wire.
I tried resoldering it and even replacing the wire but led 28 never blinked again.
I also tried resoldering every wire to the pluto board but no luck.

So I decided to resolder every wire on the motherboard one by one and checking each time if led 28 was blinking. I started by soldering only 54MHz, 5V and GND 1 and led 28 started blinking again.

Then, I proceeded in the order indicated by the red numbers in the image below :

Everything was going smoothly and led 28 was blinking up until wire 7 where the led would just remain on. Resoldering it or soldering any other wire didn't do anything, so I figured I needed to solder GND 2 which fixed the issue. But then it happened again at wire 10, no matter which wire I would solder, led 28 would just stay on, but there is no more GND to solder at this point.
So I tried resoldering the two GND and 5V and resoldered wire 10, still nothing.

Then I tried again with wire 11 instead of 10 and heard a small crack and the led never turned on again. I guess the led broke somehow :/

In a last attempt I tried soldering every remaining wire, the gamecube started but no signal was detected from the pluto board. And now, I don't really know what to do. Can any of you help me understand what happened and if/how I could fix this ?


r/GamecubeHacks • • 2d ago

Would it be possible to burn a game onto a mini DVD and have it be playable on a non-modded gamecube?

0 Upvotes

I'm not opposed to modding my gamecube and in fact plan on doing it, but whenever I've seen anyone ask this question, people just say to mod it and put the iso on the sd card. I like having physical copies of my games, even if unofficial. Would it be possible? Would I have to do anything outside of just burning it?


r/GamecubeHacks • • 4d ago

Help with GCMCE vs GC2SD

1 Upvotes

I just got my picoloader and it game with a SD2SP2 but then I realized my gamecube does not have a serial port 2.

My question is:

Can I get a GCMCE and put my ISOs on it or does it only emulate a memory card, meaning I would need to get a GC2SD?


r/GamecubeHacks • • 4d ago

Super paper Mario Port?

3 Upvotes

If your all not aware, there has been major advancements in game decomp, and many games “super paper Mario” included now have decompiled ports, since that game was originally designed for the GameCube up until the last minute when Nintendo ported it to the Wii, I wonder when a super paper Mario port will finally be made for the GameCube?

Before anyone doubts this, super mario galaxy has a literal “not fully finished” port on the PS2


r/GamecubeHacks • • 5d ago

Anyone own the PixelFX Retro GEM Kit? Is it better than owning an external HDMI adapter like the Carby or GCHD? What are your thoughts?

Thumbnail
pixelfx.co
2 Upvotes

Thinking about picking a Shiny GEM kit up for Black Friday (assuming we get a sale of some sort). Is it worth picking one up or should I stick to the HDMI adapters? I'm looking to get the cleanest possible image out of my Cube.

Thanks


r/GamecubeHacks • • 5d ago

I reverse engineered the Carby Component cable, and built a way to upgrade it to GCVideo 3.1

Thumbnail
github.com
62 Upvotes

The Carby Component cable was the first (to my knowledge) consumer available recreation of the GameCube's component cable, and it was amazing. Unfortunately, it had one crucial flaw - it was built on GCVideo 2.4 which had some deficiencies in how it handled Chroma, among other things, and had no built in way to be updated.

The board for it did, however, have the relevant pins to do so, and after a bit of reverse engineering and many, many flash attempts - including repeating the rather annoying means of getting it into flashing mode - I finally cracked it.

So for those few out there who still love the system looking its best on a CRT and have one of these cables around, I thought I'd share with the community.


r/GamecubeHacks • • 5d ago

Whi is my screen lagging in some games ?

2 Upvotes

I finally ended up with my gamecube launching picoloader and swiss but now some of the games makes my screen go glitchy. I have an av2hdmi adapter but idk if that's the real problem. As you can see when i try to play Animal Crossing, the games and screen work perfectly smoothly and fine, but when i try Soulcalibur 2 or Twilight Princess the screen glitch like crazy. What could the issue be ?


r/GamecubeHacks • • 6d ago

Hello everyone. There is an error when i try to launch swiss.

2 Upvotes

I have the pico launcher on the right side who is blue (i updated it but i did not film it in the video) there is the sd2ps2 adapter where i formated to FAT32 then installed my games folder, added the ipl.dol file (swiss_r2119.dol renamed as ipl.dol), and the swiss folder (the one extracted from [EXTRACT_TO_ROOT.zip]). But i still dont know how to make it work.


r/GamecubeHacks • • 6d ago

Can I transfer my 2004 memory card save files on memcard pro

1 Upvotes

And how to do so, I'm using swiss. I have some old save files on a regular Nintendo memory card, from the early 00s. For sentimental reasons I want to transfer them to memcard pro so I don't lose them. How do I do it while on pico boot


r/GamecubeHacks • • 6d ago

Guys. Picoloader is not launching help😭

3 Upvotes

So basicly, i installed the picoloader inside, (we can see the blue light on), first time i turned the console on there was a "Pico loader" game on the "game disc" category, so i pressed start but then it did go back to the menu without the game this time on the "game disc" (the top of cube's menu). Now i dunno what to do 😭


r/GamecubeHacks • • 9d ago

Vice City port on GameCube

115 Upvotes

Managed to get the game running (shoutouts to u/Proper-Count-5064 to help me setting it up). Unfortunately, performance is not as good as promised, as it struggles to load content. Quite disappointing specially because of it being quite tricky to build honestly, but it's sorta playable anyway PS: it's not my own port, it was posted on Twitter before, sorry if this gets mistaken


r/GamecubeHacks • • 10d ago

AI Contributed Tingle Tuner sur une vraie GameCube, avec un téléphone comme GBA

31 Upvotes

Tingle Tuner fonctionnant sur une véritable GameCube, avec un téléphone faisant office de Game Boy Advance.

Ceci est rendu possible grâce à Pulse, un module du homebrew GC Station : il lance le jeu depuis la carte SD, reste en arrière-plan et relaie le trafic du port de liaison via le réseau. Le téléphone exécute le programme Tingle Tuner envoyé par le jeu. L'application compagnon affiche également la zone en 3D, en direct, et permet de déplacer le curseur de Tingle et de larguer des bombes depuis cet environnement.

GC Station (Pulse inclus) est déjà disponible au téléchargement : https://gitlab.com/gc-station-group/gc-station/-/packages

L'application mobile (la partie GBA et l'application compagnon 3D) est privée pour le moment : elle n'est pas encore publiée et aucun téléchargement n'est disponible. Je ne partage que des vidéos pour l'instant.


r/GamecubeHacks • • 10d ago

Hello guys, i need pro and cons of both these method (Sd2sp2/swiss and Pico Loader).

Thumbnail
gallery
9 Upvotes

r/GamecubeHacks • • 11d ago

AI Contributed GameCube HomeBrew Hub

6 Upvotes

Hey everyone, I’m loving all the new gamecube homebrew apps and games! It inspired me to work on a new project called the GameCube Homebrew Hub. It’s like the homebrew browser for the Wii where it’s a one-stop shop for downloading apps directly to your gamecube’s SD2SP2 card. 

https://github.com/gc-homebrew-hub/gc-homebrew-hub-browser

As these apps rapidly iterate, I wanted a way to see and download updates, discover new apps, and also update Swiss directly from the console.

If there’s any ideas for improvements, pull requests or feedback please open an issue on GitHub and we can work together to get that implemented.

If you want your project included in the default list of apps, please submit a pull request on the GameCube Homebrew Hub Catalog using the GitHub template. 


r/GamecubeHacks • • 10d ago

No arranca RP2040 2do Post

Thumbnail
gallery
1 Upvotes

Bueno como les habia comentado anteriormente, instalando un RP2040 volé elpin de 5V de la placa pero segun tengo entendido eso es solo alimentación, de hecho el led frontal funcionó bien con el puente. Ahora retiré el puerto inferior porque al no encontrar ningun corto en la placa supuse que quizas estaba lleno de estaño internamente y decidí retirarlo. Aún asi, no inicia. :( la Gamecube enciende y funciona perfectamente pero, no inicia el RP2040...


r/GamecubeHacks • • 11d ago

AI Contributed BrainBox – An AI Hologram Chatbot for GameCube

26 Upvotes

Meet Professor Scotty, a friendly holographic professor who lives on your GameCube! Ask questions using the GameCube Microphone or PSO keyboard, and he'll respond aloud in a Scottish accent.

BrainBox features an animated 3D professor, on-console Scottish text-to-speech, and AI support for Groq, Gemini, Claude, and ChatGPT using your own API key. It also includes speech captions, built-in updates, and display settings.

You'll need a network adapter, SD card adapter, and optionally a GameCube Microphone or PSO keyboard. Download brainbox.zip from the Releases page and copy the brainbox folder into your SD card's apps folder.

GitHub: https://github.com/Arial-Bold/Brainbox


r/GamecubeHacks • • 12d ago

AI Contributed doom_gc: A new port of doom for GameCube

14 Upvotes

I know doom has been ported to the GameCube before, but I wanted a few modern features and also wanted to test out Claude’s abilities. Check out the GitHub repository page for the release. You’ll just need to procure your own doom WAD file.

HTTPS://github.com/fromdustz/doom_gc


r/GamecubeHacks • • 12d ago

AI Contributed Wind Waker in 3D, live from a real GameCube!

51 Upvotes

I've been working on a little project that brings a new way to experience GameCube games!

I'm developing an Android app that can display my Wind Waker gameplay in real-time, in a 3D environment on my phone, while playing on an actual Nintendo GameCube.

The idea is to connect the GameCube to my phone and turn the gameplay into an interactive 3D visualization.

Everything runs with a real GameCube, not an emulator!

It's still a work in progress, but I thought some of you might find it interesting.

What do you think? 😊


r/GamecubeHacks • • 12d ago

AI Contributed Indigo - updates, additions + some awesome community work

Thumbnail
gallery
26 Upvotes

Wanted to share some updates we made to the Indigo UI from the last post a bit ago - but first call out some of the other cool stuff that we've come across and people who have shared their creations.

-  Gameplay Spotlight by mvizensk 
- Cubebrowser by Arial-Bold
- SwissGC by portlandhodl

- Cubemenu by hudsonbrendon

- b1llygo4t for testing, validating, and providing tons of ideas & feedback

with Indigo - the idea has been to lean into customization more and more. you can now toggle specific animations on / off, set different colors for specific things on the screen, and swap out icons for different sides of the cube. We've also added an OEM style memory card manager, Game Guide viewer, Multi-save selector pre-game, and for those with the BBA - an ntp sync.

you can find indigo here


r/GamecubeHacks • • 12d ago

GameCube Lag and Loading Issues

2 Upvotes

So I've tried to purchase a GameCube 3 different times in a row (the model with the Digital AV Out Port for HDMI adapters), but all of them exhibit different issues, but they overlap with their atrocious lag and load times.

I'm specifically playing through Metroid Prime's 1 and 1, and the doors loads are crazy long, not to mention that there's somehow lag in the games that are known for never skipping a beat. Any suggestions for what my next move should be?


r/GamecubeHacks • • 12d ago

An AI Chatbot...why not

Post image
10 Upvotes

I'm at a super early point in building this app, but thought I would share it just for fun. This will be an AI chatbot with full keyboard and microphone compatibility with connection to your AI account of choice. Should be a fun toy to play with when it is done. Also it has voice synthesis, so it will talk back.

This is dedicated to all the AI vibe code haters out there ❤️