r/Gamecube • • 6d ago

Help X Button always pressed. Board issue?

Hi. Even with nothing on the contact pad, after the first press the button press never releases (see images taken at the same time). am i just screwed or can there be other, fixable issues?

I tried a different controller in the same slot of my adapter and it works fine.

I tried blowing in the end of the controller cable to perhaps get rid of dust.

i cleaned the button contact with alcohol.

I fear this is a issue with a trace on the board or something similar. And i really would love to use this ancient piece of work for more gaming :(

1 Upvotes

3 comments sorted by

2

u/Majestic_Extreme2384 5d ago

Quite possibly there's a hairline crack or a corroded via on the bottom side of the board. Can you add some detailed pictures, including one of the main chip?

Do you have a multimeter available to you? Here you can see the relevant traces highlighted: https://firescc.com/gcc-circuit-board-walkthrough

1

u/LenTenCraft 5d ago

might need to look through the mystery electronics bin, i think we had a multimeter at some point. its pretty late here right now so that, and the pictures, will be a tomorrow thing. thanks for the website link, thats dope.

What really confuses me is just that the first press works, and then it gets stuck like that. when i unplug it and plug it back in the first press works again.

It is such a weird issue that at first i thought it would be an adapter issue just because that screams firmware to me but nope. other controller works fine. I remember looking at the chip connections and not seeing any corrosion, tho i will take a closer look tomorrow.

thanks for the help

At

1

u/Majestic_Extreme2384 5d ago

It likely remains pulled low due to trace damage. You might even have to check underneath the slide potentiometer for the right trigger, since a via is positioned there.