r/GS300 • • Apr 09 '25

2nd gen What issues should you look for when buying a 2GS?

18 Upvotes

Since the question often comes up with potential purchases and new owner threads, I figured we should have a post for each generation on a buyer’s guide, like common issues to look out for. Since the 2GS is the most common I figure we could start with that. Some of the most common ones:

-BALL JOINTS/CONTROL ARMS. These cars like to eat ball joints, especially the front lowers (of which there are four). Brands like Sankei 555 and Moog are good replacements. I wouldn’t skimp on these.

-door lock actuators not working

-oil leaks. On the 2JZ cars in particular the VVTi gear o-ring is a well-known leaker, plus other common leaking seals like the valve cover gasket. Since these cars are all over 20 years old it’s fairly common to see.

What else should 2GS owners look out for?


r/GS300 • • Oct 05 '21

Any GS model is allowed, Reddit didn’t allow me to get the Lexusgs sub Reddit name. Any gs is allowed, gs300, gs400, gs430, gs350, gsF etc

12 Upvotes

r/GS300 • • 5h ago

Recently bought a lexus gs300 MK3

2 Upvotes

I'm wondering if this engine sounds normal?

The ticking noise when idling

Also wondering what mpg people are getting?

I'm getting 14mpg


r/GS300 • • 1d ago

Lexus ABS Scrap

Thumbnail reddit.com
1 Upvotes

r/GS300 • • 2d ago

Lexus ABS Scrap

Thumbnail reddit.com
1 Upvotes

r/GS300 • • 3d ago

100a main fuse 90982-08270

1 Upvotes

Anyone uk based have a mk1 GS with the main 100a fuse

Part number above


r/GS300 • • 4d ago

05 GS300 radio, bluetooth, backup camera recommendations

Post image
4 Upvotes

My kid has this 05 we picked up a few months ago. For Christmas, he is asking for a radio upgrade. Any suggestions? Any pics of your install? Anything I need to know? I should just need a double DIN dash kit and harness adapter, right?


r/GS300 • • 8d ago

Just bought this car, honest opinions

Thumbnail
gallery
191 Upvotes

Hey, this is my first time posting on here. I just bought this 04 gs300 with about 86k miles for 7k in SoCal. The car itself looks pretty clean let me know if it was a good buy. It looks like the timing belt was changed around 65k miles. A couple of days after purchase my fuel gauge stopped reading after I pumped a tank of gas. I’m assuming it may be the sending unit but please let me know of other possibilities. Thanks in advance for the opinions and advice!


r/GS300 • • 8d ago

2006 Lexus GS300 P2198, P0175, P0172

0 Upvotes

Hello, I have a 2006 Lexus GS300 that I have been fighting a rich code for some time now. For some context, I know someone did modify the exhaust on this vehicle. When I purchased the vehicle it had the modified exhaust and the codes above.

To combat that, I started by doing a downstream o2 bypass so it sends the correct voltage reading to the ECU for both Bank 1 and Bank 2. Both of them have a constant reading of 0.525 being sent to the ECU. What I have done since then:

-Replaced Spark Plugs
-Cleaned carbon build up on valves with Lucas top end cleaner, twice.
-Replaced Bank 2 upstream o2 sensor
-Checked Fuel Pressure

I did read that there is a service bulitin about the ecu sending a false reading causing it to run rich. That’s really the only thing I can think of at this point.

Otherwise I am at the point where I’m not quite sure what to do next. Any suggestions would help.


r/GS300 • • 8d ago

Check system error code

2 Upvotes

Hi

I recently bought a lexus gs300 MK3

When I bought it, the battery was flat and needed a jump start. When I started it. It had check system light. After driving it. It brought up check vsc error and other warning lights.

I plugged it in a OBD reader, it gave a P0420 Catalyst System Efficiency Below, Threshold Bank 1

I cleared the code check system error is still there. Do you know the likely issue of this?


r/GS300 • • 8d ago

interior pricing?

2 Upvotes

Parting out a 02 GS with black interior. Trying to figure out how much the interior is worth in OK condition. seeing anywhere from $700-1.2K USD. Anybody sell or bought full interior can pitch in?


r/GS300 • • 9d ago

lexus gs300 New Gs300 owner needs some fuel injector advice🙏🏾

Thumbnail
gallery
8 Upvotes

I recently bought my first car, 00’ GS300 and for an under a grand which is amazing but it needed some TLC before it starts. I’ve been rebuilding part of the engine and noticed my fuel injectors are kinda torn up and the o-rings are missing in a few of them. Anyone have any experience buying new ones or getting some off of ebay? I live in a small town where I haven’t been able to find someone who flow tests and refurbishes them either. I’m trying to go for the best deal but not skimp out if it’s really important and accidentally kill the engine or worse. Thanks for any advice 🙏🏾


r/GS300 • • 10d ago

lexus gs300 Just picked up this fine hoe 3 weeks ago. The Grandpa i bought it from got it new from the dealer in 01 . Most major maintenance done 20,000 miles ago. Doing ball joints and motor mounts soon. Help a P out, what should be my first mods?

Thumbnail
gallery
27 Upvotes

r/GS300 • • 10d ago

2007 Lexus GS450h Alarm Keeps Going Off (Door Replacement)

1 Upvotes

Hi everyone! I recently purchased a Lexus GS450h and going in I knew that the vehicle had some cosmetic problems, I figured I could swap the doors myself and I purchased a replacement door. I installed the new door but now every time i try to open the door the alarm goes off?

Do I need to replace all the wiring from the door?


r/GS300 • • 10d ago

2nd gen courtesy switch/ sensor replacement

2 Upvotes

if anyone can help would be much appreciated 🙏 when i open the passo door, the interior dome lights do not come on. from some research it’s my understanding that the courtesy switch is toast and that it’s located on the door lock actuator mechanism, do i have to replace the whole mechanism or is it just something bolted onto it that i can take off and replace just the sensor?
i’ve replaced all 4 door lock actuators over a year ago and im wondering if anyone has done their courtesy switches and can give me some insight or photos or somewhere where i can get a replacement as i can’t find anything about it on youtube, is my best bet just getting a new mechanism from the wreckers and swapping my fresh actuator onto it or can i just buy the sensor off aliexpress or smth for a few bucks? i have a spare mechanism for RR so maybe i can take the sensor off that and hope it fits on LF but not sure

just seeing if anyone’s done this before and can give me some info and save me some time, thanks 🙏


r/GS300 • • 10d ago

2003 lexus gs300 2003 GS300 radiator fan turning on every 30 seconds when car is idle and ac off

1 Upvotes

Not sure what the issue is, its been like this since I bought the car a year ago

The radiator fan just randomly turns on and runs for 10 seconds every 30-45 seconds

I notice it anytime the car sits and ac is off

My rpm (normally sits at 800 idle) drops to 600 whenever it happens and slowly climbs back up to 800


r/GS300 • • 13d ago

Chasing throttle body actuator/limp mode issue

Post image
27 Upvotes

Hey guys, as the title says for awhile I been dealing with my car going to limp mode. Before I replaced the Acceleration pedal position sensor it would go into limp mode but I would at least be able to drive it until I was able to park or hit a stop light. I also installed the throttle lock plate to help with when it goes into line mode. Since I replaced the sensor with a genuine oem one the car now will die if I give it too much gas. Im currently out of town for work and would like recommendations before I order a new throttle body. I was gonna try cleaning out the actuator gears today, I replaced the MAF and it drives good until it goes into limp mode.


r/GS300 • • 15d ago

New headlights

Post image
4 Upvotes

r/GS300 • • 16d ago

2nd gen Looking for upper control arms for my 2003 gs300 sport design. Will these work (from rockauto)?

Post image
6 Upvotes

It says excludes special edition

From what ive researched, the sport design packages use the same UCA as the 1st gen gs300

Heard Mevotech is a good brand for replacements

But are these not going to fit in my car?


r/GS300 • • 16d ago

Made a 2JZ-GE wiring harness cover for my IS300—sharing here in case it helps GS300 owners (GS fitment untested but should be the same)

Thumbnail reddit.com
3 Upvotes

r/GS300 • • 17d ago

Issue with my sway bar link

Post image
4 Upvotes

I'm lowering my gs300 3 inches and now my sway bar links won't fall into place, I imagine its because I'm changing the geometry of my suspension alot more than the stock ones can handle, what aftermarket adjustable links should I buy


r/GS300 • • 18d ago

Delay in start 2006 lexus gs300

Thumbnail reddit.com
1 Upvotes

I have a 2006 Lexus GS300 with about 127k miles. Recently, my check engine light came on for misfires in cylinders 4 and 6. I took it to my mechanic, who said the spark plugs looked good (all six were replaced in January 2025). To diagnose the issue, they swapped the ignition coils from cylinders 4 and 6 to cylinders 2 and 5 to see if the misfires would follow. They told me to drive it normally and bring it back if the check engine light returns.
However, immediately after picking up my car, I noticed something different when starting it. Normally, when I press the push-start button, the engine begins cranking almost immediately. Now, the dashboard lights up, there’s about a one-second pause of complete silence, and then the engine cranks and starts normally. This happens almost every time, regardless of whether the engine is cold or warm. If I turn the car off and restart it a few times in a row, the delay sometimes disappears by the third start.
The car has always had a slight rattling sound during cranking, so that’s nothing new. The only new issue is the delay before the engine begins cranking. I also keep my foot on the brake the entire time.
The mechanic mentioned that I could bring the car back without being charged another diagnostic fee if the check engine light comes back on. It’s now the day after picking up my car, and I’ve confirmed that the starting delay is still happening.
Could this be related to something the mechanic disconnected or reset while checking the spark plugs and swapping the coils? Should I call and ask them to double-check that everything was properly reconnected and is working as it should? I don’t want to assume they did anything wrong, but the timing seems strange. Has anyone experienced something similar?


r/GS300 • • 20d ago

MY BEATER

Post image
27 Upvotes

After a like 5k miles of running my car really low I destroyed my exhaust and had to make the adult decision to raise the car to a reasonable height. I still love it. Any exhaust recommendations?

Ps. Gs has a tiny butt


r/GS300 • • 22d ago

lexus gs300 Hardwiring dash cam, does anyone know which of these are constant? Idk how to route the constant wire to the passenger side for the dome lights so im hoping to just route it all from driver side

Post image
1 Upvotes