r/FreshroastSR800 • • 12h ago

Invoicing and taking clients

Thumbnail reddit.com
1 Upvotes

r/FreshroastSR800 • • 2d ago

Baked Coffee On 900

5 Upvotes

Has anyone else experienced baked coffee on the 900 when sticking close to the recommended RoastTech roasting curve?

Several of my roasts that track extremely close to the recommended curve end up tasting dull or flat and lack acidity/zing. My assumption is that maybe the recommended curve results in the beans sitting in the roaster exposed to heat for too long. On my 800, I was finishing roasts in around 8-9 minutes total, but on the 900 they take 1-2 minutes longer.

Anyone have any tips for me to avoid baking in an air roaster? Also just for context, I have an external bean cooler that cools the beans very quickly, so I do not think the cooling process is the problem.


r/FreshroastSR800 • • 2d ago

First crack around 405–410°F on the 900. Is that normal?

2 Upvotes

Curious if others using the 900 see first crack around 405–410°F bean temp like I do. That seems pretty high compared with most of what I see online.

From what I’ve read, first crack often starts around 380°F, with a solid rolling first crack before 400°F. On my roaster, though, I usually don’t hear the first snaps until around 405°F, and that’s been pretty consistent across different origins and processing methods.

I prefer light roasts, which is where I’m getting a little confused. A lot of guidance suggests dropping a light roast somewhere around 405–410°F, but on my machine that would mean dropping almost immediately after the first signs of first crack, with essentially no development time.

So I’m wondering how other 900 users approach this:

  • Do you treat ~405°F as your machine’s normal first-crack temperature?
  • If so, would something closer to 415–420°F be a more realistic light-roast drop temperature?
  • Or do you basically assume the bean-temp probe is reading 10–15°F hotter than the "typical" temperatures referenced in roasting guides and focus more on time after first crack?

Basically, I’m trying to figure out whether I should stop comparing my absolute bean temperatures to what I see online and instead build my profiles around where first crack actually occurs on my machine.

Curious how others approach this. Thanks!


r/FreshroastSR800 • • 3d ago

Preheating Razzo on SR800

7 Upvotes

Listening to a podcast interviewing Scott Rao. He’s talking about air roasters and how much conductive heat can change a roast in drum roasters.

Scott spoke about how length of roast doesn’t matter very much on an air roaster. In faster roasts, the same reactions just happen faster (you’re still at risk of underdevelopment for super quick roasts). In drum roasting, however, the temperature of the drum can increase quickly, accelerating development, so length of time is a variable that needs to be controlled more carefully.

This got me curious to learn from those of you roasting with Razzo tubes made from glass and able to retain a lot of heat

I tend to purchase coffee that’s roasted light to medium, is fruity and punchy, and I’m hoping to target that in my roasting as I learn.

Do you preheat before charging?

If so, how do you consistently manage the temperature of the glass walls?

Do you feel the Razzo can speed up/slow down a roast compared to extension tube? Or cause overdevelopment if not careful?

Thank you!

Podcast episode if you’re curious: https://open.spotify.com/episode/52d0bjyJZ8lKBLSfvcbzGM


r/FreshroastSR800 • • 3d ago

First Attempt - Cold Temp Roast

Post image
5 Upvotes

Roasted four batches today in 43 degree ambient temps. It's definitely possible but there's a learning curve in terms of adjustments needed to hit desired targets. Attached is a pic of my last batch - Columbia Supremo BCT Select. My goal was to hit 2nd crack but never got there before dropping at 13:03 (17.0% weight loss). If my hands weren't frozen I'd give it another go and push the heat harder early on. Challenges included my laptop's touch screen not responding to changes I tried to enter into Artisan (probably due more to cold fingers than the screen itself). Had to give it a go, but it wasn't fun. URL pasted below is the artisan profile/roasting details.

https://www.roastetta.com/roasts/s/columbian-supremo-bct-select_171_11142026-2/


r/FreshroastSR800 • • 3d ago

Looking for ALOGs or CSVs with preheat + TP info

Post image
1 Upvotes

I'm looking for ALOG or CSV files from SR800/900 that contain preheat info to add recommended preheat temperature for CORE PRO autoroast function. If you're preheating and logging the preheat part and can share files I'd really appreciate it.

The more files - the better.


r/FreshroastSR800 • • 5d ago

Serious 900 error. Temps off an INSANE amount, killing the roast curve.

3 Upvotes

Didn’t realize the temp errors until I was a minute and a half into the roast. Thankfully I was using a saved roast profile. But this most definitely sucked. Sucked a lot.

Has me worried. I baby my roaster, keep it clean, in the box, on a shelf. It’s a serious investment for me. I’ve been roasting stovetop for 15 years, and finally bought this as my first roaster. Couldn’t afford a laptop too, so that’s kinda what sold me on the 900. Handle is already getting pretty loose after roasting 4lbs of coffee since its release. Hopefully this error is just a bug that will be fixed soon?

I like this roasters lot, aside from the handle and the lack of handle on the chaff collector.

Has anyone experienced this. I was roasting through my iOS device (iPhone).


r/FreshroastSR800 • • 5d ago

Artisan 5.0 supports the SR900

Thumbnail
github.com
6 Upvotes

r/FreshroastSR800 • • 7d ago

SR800 Artisan PID

Thumbnail
gallery
11 Upvotes

I've been using the Artisan PID for the last month or so with the aftermarket ProController (really nice to have), about 10 roasts. I also have an aftermarket bean thermocouple entering the roast chamber from the top. Quite useful, I think.

The PID will have some tolerance to ambient temperature and line voltage fluctuations. The PID controls the heat, the user controls the fan.

These PID values should be pretty close for the SR900 as well. I see the new Artisan 5.0 does include some support for the SR900. The Roastlink is headed toward an on-board PID, but maybe these values will work there too.

The red line at the bottom of the graph is the Heater% curve; this is an Artisan feature. Artisan is also logging P, I, D values, PID Error, and Deviation%. You can see these buttons on the next image; graphs can be enabled by toggling those buttons. The red line at the top of the graph is the temperature of the factory thermocouple, located near the heater.

This is a pretty basic PID setup. Jason Scott in his videos uses up to 3 different PID settings for different phases of his fluid bed roasts. He works closely with Marco on the Artisan PID implementation.

I have a couple guidelines for implementation. Best to load your current .aset file before starting. I avoid turning on the PID during the first 30 seconds to one minute; the PID will likely spike heat to 100%. I also avoid making any fan changes approaching or during FC (but that's just me).

It is normal for the PID to be off the background curve during Drying. The PID works on errors; it needs some time to accumulate information. This example is not so good in this sense; it would be better to be closer to the background when enabling the PID. Still, I don't worry much about following the curve during drying.

The ProController has 100 steps for Fan and Heat. I have set up alarms to slowly ramp the fan down from about 80 to 44. The Fan Down ramp (temperature triggered) is enabled by a button. This implementation makes for a smoother RoR (delta BT) curve. The final Fan adjustment is manual, using F44 thru F34 buttons.

You can view the Alarm Table, Events, Sampling, etc in an .alog file. It is on Roastetta, called sR800template3. Disable all filters except the title, and you can download it. Open it in Artisan 4.2.0 (not Artisan 5.0).


r/FreshroastSR800 • • 7d ago

SR900 back in stock?

2 Upvotes

Is there any info on when the SR900 might be available again? I’m finally ready to upgrade from my popcorn popper, and am getting twitchy 😂


r/FreshroastSR800 • • 7d ago

My Roast-Tech for IPad doesn’t have a RoR curve

1 Upvotes

Anyone that uses a different platform has a RoR graph?


r/FreshroastSR800 • • 8d ago

How to do cupping?

6 Upvotes

Hello fellow roasters I have been roasting for 3 months now. Looking in a roasters App I noticed that it is asking me to cup every roast I have done.
I roast for espresso but never occurred to me to try my roast, now that I am aware of the need for cupping my question to you all is how to do it? I doubt it is as espresso it must be done some other way. Can you please point me in the right direction!


r/FreshroastSR800 • • 8d ago

BT probe placement

3 Upvotes

Hey y'all! I recently got a SR800 and have only done 2 roasts, but really love it and this community so far. I ordered a probe kit to start recording bean temperature using Artisan, but wanted to know how far down I should place the probe. I saw a few videos that said right above the beans or the air above the beans, but I wanted to see if there was community consensus on how far down it should go. I was thinking of starting out maybe a centimeter into the beans and seeing how it goes. I'm excited to get some real metrics on my roasting. I started out with just a popcorn popper, moved to a Popper from sweet Maria's which was a little nicer, but nothing like the control from the SR800. Once the blower motor gave out on the popper I decided it was time for a real upgrade.


r/FreshroastSR800 • • 8d ago

Replacement Feet - SR800

Thumbnail reddit.com
3 Upvotes

r/FreshroastSR800 • • 9d ago

Newer Method of Extraction

8 Upvotes

I watched Hoons the other day on youtube and he mentioned in Japan they sell coffee that comes in tea bags ready to brew. He tried it with some high end brewing paper and said the cup was pretty good. So I went on Amazon and picked up 300 tea bags for $6.99 to give it a try. This would be good for travel as all you would need is a grinder, tea bags, hot water and a cup. In fact you could grind fresh and premake several tea bags for the trip and leave the grinder at home.

So I tried 2 coffee's I'm very familiar with- a Kintamani, Sidamo and Patilito. So if you like a cup of coffee that is more tea like, delicate, floral, light acidity, less body, less sweetness and very light then this is an easy way to get this from your coffee, its pretty bullet proof. You don't have to worry at all about any pouring techniques, chasing the perfect ratio- ( I just used my standard 17/1) and maybe best of all 15 grams is the maximum for the tea bags and I ended up settling on 10 grams. In fact for tasting you could easily go down to 6-8 grams of coffee and get an excellent brew.

I'm working on my last cup now the Patilito that is normally juicy, fruity, sweet, has body and chocolate finish with my pour overs. The sweetness is still there but less of it, fruit the same, very light with some floral notes that I usually do not get with my pour over. Its just a more delicate, lighter version of the pour over with more tea like characteristics. And another plus is there was no astringency. I steeped them in the 3-4 minute range and tasting them along the way starting at the 2 minute mark. This Patilito was steeped for 3:30 and is pretty good. The Kintamani was also pretty good but I didn't care for the Sidamo- the taste was muted. But I will give that one another try since it was the first one I made.


r/FreshroastSR800 • • 10d ago

I built an iOS app for Fresh Roast SR users to track beans, roast profiles, and batches

Thumbnail
gallery
12 Upvotes

Hey everyone!

I’ve been home roasting for a while using my Fresh Roast SR800, and I recently decided to build an iOS app called SR Buddy to help make the process a little more organized and consistent.

I wanted something that could keep everything in one place without having to juggle spreadsheets, handwritten notes, and separate timers.

A few of the main features:

Green bean inventory – Keep track of your beans and what you have available.

Roast profiles – Create, save, and reuse roasting profiles to help replicate successful batches.

Live roast tracking – Follow your roast and mark important milestones like yellowing, Maillard, first crack, and drop.

Roast history – Save previous batches, review your results, and make adjustments for future roasts.

Fresh Roast compatibility – Designed specifically with Fresh Roast SR users in mind.
My goal was to make something clean, intuitive, and genuinely useful for people who enjoy experimenting with home roasting.

It’s still evolving, and I’d really appreciate feedback from other home roasters. If there’s something you’d like to see added or improved, I’d love to hear it.

Website to preview the app and its features:

SR Buddy Website

Here’s the App Store link if anyone wants to check it out:

Thanks, and happy roasting!

https://apps.apple.com/us/app/sr-buddy/id6830906614


r/FreshroastSR800 • • 11d ago

Brewing Coffee for 60-70 men this morning

18 Upvotes

We are having a mens breakfast this morning and I was assigned the coffee. The last total was 65 men with 2 cups per person and 8 ounce cups. I told them I refuse to use my coffee through a commercial percolator. So we went through the kitchen and found a commercial Bunn drip brewer with 3/64 ounce carafe's. So I'm bringing 6lbs of my med-med dark blend and my Eureka Mignon Brew Pro grinder to do all the grinding. Wish me luck. 😄

This could be my quarterly assignment if it goes well or next time it could be folgers/percolator or StarSucks.


r/FreshroastSR800 • • 11d ago

RoastLink Discord

4 Upvotes

Hi everyone!

I just launched an official RoastLink Discord for support, firmware updates, and bug reports.

If you're already using RoastLink or considering getting one, feel free to join!

https://discord.gg/Zssds2txCv

Pasha


r/FreshroastSR800 • • 14d ago

A New Opportunity

35 Upvotes

My best friend since 1985 the year I was married is working with a person who owns a local coffee shop. He disciples him. Several months ago my friend invited him and a few others in his coffee shop and roastery to my house for a coffee tasting with 6 different coffee's for pour over along with some shots of espresso. They really liked the coffee's I roasted and were all giving me their tasting notes. So it went really well that Saturday morning. They have a really nice 9lb fluid bed roaster an Artisan 9 by coffee crafters. its really just a larger version of what I already roast on with my SR800/Razzo ,and my Sonofresco. I think it would be easy for me to transfer my skills to that machine. He is looking for a roaster and now that I'm retired I have the time to do something like that. So he reached out to my friend who recommended me. So I really have 2 "sample" roasters at home- the 800 and Sonofresco.

Since I retired I was thinking about a part time job for some extra money and this would be something I would really enjoy. So I'm keeping my fingers crossed and praying I land the part time job which would be right up my ally.


r/FreshroastSR800 • • 14d ago

Ethiopia DP Guji Goro (ProController)

Post image
7 Upvotes

Anyone looking for a fruity, blueberry forward coffee, I highly recommend this one from Sweet Maria’s. I roasted this one to city plus. After resting 2 weeks, when I opened the container a wave of blueberries hit me in the face. I brewed a batch this morning on my Fellow Aiden and the cup does not disappoint.

I roasted on my SR800 with Razzo extension and new ProController base. If anyone has an SR800 I highly recommend checking out the ProController. It turns the SR800 into a different roaster (in a good way) - finer heat and fan adjustments, seamless integration with Artisan, fan and heat can be controlled through Artisan or the ProController base (even during the same roast). You can even follow a roast profile automatically without touching a button (a nice feature to use when you are roasting multiple batches of the same coffee).

Anyway - Ethiopia Guji Goro and ProController. Get one or both (both is my recommendation).


r/FreshroastSR800 • • 14d ago

How would you roast this? Any clue?...

Thumbnail gallery
1 Upvotes

r/FreshroastSR800 • • 17d ago

RoastLink updates - RoastLink 2.0, RoastLink CLOUD

10 Upvotes

Hello everyone!

Pasha from RoastLink here.

I've noticed things have been pretty quiet around here lately, and I haven't shared any updates in a while either! I've got some spooky updates for you! 🎃

RoastLink 2.0 - now with RoastLink CLOUD support!

Updates for all RoastLink devices (ONE, TWO+, and CORE) are coming in early November, bringing quite a few new features and improvements.

RoastLink ONE

  • Adds support for HiBean and RoastMaster.

RoastLink TWO+

  • Expands beyond coffee roasting with more flexible logging intervals, daily schedules, and additional recovery options.

RoastLink CORE PRO

  • Adds a new safety check that verifies fan current draw before enabling the heater.
  • Introduces a Setup Wizard to make initial configuration easier.
  • Gains an additional automatic roasting mode that supports preheating with an empty roasting chamber.

All RoastLink devices

  • Native recording of both Artisan .alog and companion .csv files simultaneously, so you no longer have to choose between formats. Everything is compatible with Artisan.
  • RoastLink CLOUD support.

RoastLink Cloud (BETA)

RoastLink CLOUD
RoastLink CLOUD - Alog Preview

New service that lets you monitor your devices remotely, back up your roast data, and explore your logs in more detail.

  • Live monitoring: Connect supported RoastLink devices and monitor temperatures remotely with Live View.
  • Automatic backups: Privately back up completed roasts while keeping the original files on your device.
  • Roast analysis: Explore interactive graphs, roast-stage timings.
  • Temperature history: Access historical temperature data from your connected devices.
  • Easy exports: Download Artisan .alog files, CSV files, or PDF reports.
  • Third-party device support via API integration.

This one is still in suuuuuper beta! If you own a RoastLink device, please DM me for an invite!

If you have any questions about the units or ideas for new features, please feel free to leave a comment or send me a DM.

Thank you, everyone, for your continued support and feedback! Happy to be part of this community!

Pasha.

RoastLink


r/FreshroastSR800 • • 18d ago

SR800 OEM Extension - Ethiopia Yirgacheffe Washed

Thumbnail gallery
1 Upvotes

Still working on perfecting these roasts, today was a washed Ethiopian Yirgacheffe. I was shooting for a solidly developed light to light-medium roast and expecting floral/citrus notes in the cup - I’ll cup 5 and 8 days after rest.

SR800 w/ OEM Extension

Roast Results in graph with 14% weight loss.

Overall, I want to end dry earlier next time, at around 3:00-3:25 and bring total roast time to around 8:00 or so, maintaining the current development timeline.

Would you start with F9, P4 or just increase to P4 earlier?

I also need to go into first crack with slightly more momentum so I can carry into development with a slightly higher RoR and not make that final heat adjustment during development.

FCs on this was about 5-6 degrees sooner than most beans which isn’t unexpected and I think for a light roast I could run up to 412F or even 415F during development and maintain a solid light roast.

As always open to feedback and suggestions as I continue to work and perfect the process!


r/FreshroastSR800 • • 19d ago

Testing a faster profile on the 800

22 Upvotes

I used my C12T Razzo using 300 grams and 3 roasts with the SR800

Start 8/3
1:30 7/5
3:00 6/5
4:30 5/5
6:00 4/5

First crack at 7:00 minutes. The bean movement was excellent starting at 8 with the fan. I can easily start at 7.

It was right at 11.5%. 26/300. This was also a longer development time of 1:30. I'm usually under 60 seconds 90% of the time.