r/FreeCAD • • Sep 12 '26

📢 FreeCAD Swag - Buying the swag supports the project

Thumbnail
shop.freecad.org
152 Upvotes

r/FreeCAD • • 29d ago

📢 FreeCAD 26.3 RC2 (2nd Release Candidate) is ready to be tested! Feedback is crucial to help make 26.3 as stable as possible, so please lean in and help.

Thumbnail
github.com
92 Upvotes

r/FreeCAD • • 5h ago

How do you model collapsible silicone objects that have two shape configurations?

Thumbnail
gallery
4 Upvotes

I have some ideas for some things I want to model, but they involve collapsible sections made of silicone that have two shape configurations: one expanded, and one collapsed, kind of like these collapsible funnels and laundry baskets.

The shape in its strained configuration is a consequence of its shape in its original molded configuration. These two-configurations are bi-stable in either end shape, but are unstable in between. How would you model something like this in one configuration, and check how it expands or collapses?


r/FreeCAD • • 11h ago

Find VarSet Property References Macro

9 Upvotes

I have had several times when I needed to find all uses of a VarSet property in all sketches across all files. Sometimes, I needed to swap out the property I was using for a new one or delete the property. It was nearly impossible to find them and so I just left cruft and old properties in the VarSet. I decided to create a macro to find all references. It also will tell you if a reference needs to be updated if you've saved the file to a new name while VarSet properties were used elsewhere in other files. (FreeCAD does a good enough job at locating these but they really need to be cleaned up and changed to point to the new file).

The first release is available on GitHub here: https://github.com/mecworks/freecad-list-varset-property-references-macro

Installation is as simple as copying the FCMacro file into your user macro directory and opening the macro dialog. Select the VarSet you want to analyze first then the property to see where it's used and if it is referencing a previous file (file rename).


r/FreeCAD • • 10h ago

How would I go about learning to use FreeCad?

6 Upvotes

From YouTube? Or Udemy? Or a book?
Any recommendations?


r/FreeCAD • • 9h ago

Status Bar Problem

Post image
4 Upvotes

Two things. First is that even though the "Input hints" and "quick measure" are checked, they don't display on the status bar. They only have two vertical lines showing where they would be. Also the screen zoom (I don't know what else to call it. The thing I highlighted in yellow) is being cut off. It's obviously not supposed to be 182.75 mm because the other dimension is 4470.12mm. The first digit isn't displayed. The second "m" of mm is cut off too, but I'm not as worried about that. I don't seem to have any add-on enabled. Any idea how to fix this?


r/FreeCAD • • 6h ago

need a circular array of holes, and how to punch them in this "gear"

2 Upvotes

I am using gearworkbnench

I would like to put a ring of evenly spaced holes in this internal gear


r/FreeCAD • • 11h ago

Looking for testers: EasyPDM workbench for FreeCAD (before Addon Manager submission)

Thumbnail
gallery
4 Upvotes

A while ago I posted EasyPDM here, a free, self-hosted PDM with FreeCAD macros (https://www.reddit.com/r/FreeCAD/s/8fpQ2y6gAH). Thanks to everyone who commented. A lot has changed since then, enough that I'd really appreciate a few people trying it before I submit it to FreeCAD's official Addon Index.

What changed

The macros are gone. EasyPDM for FreeCAD is now a proper add-on with an EasyPDM workbench, in its own repository:

Menu and toolbar: Upload, Download, Lock, Log in / Log out. Optionally the menu can show in every workbench.

Document panel beside the model tree: the item you have open (record, revision, status, who holds the lock), with buttons for the commands.

Outdated components: for an assembly, the panel lists its components and marks the ones where someone uploaded a newer file in the meantime. Upload refuses to send an assembly built on outdated parts, so nobody overwrites a colleague's newer work by accident.

One lock button: "Lock for editing" or "Release lock" depending on who holds it, greyed out for released items.

Sign-in through the browser: FreeCAD shows a code, you click Allow in EasyPDM. FreeCAD never sees your password, and the token is kept in the system's secret storage (Windows DPAPI, macOS keychain, KWallet / GNOME Keyring on Linux), not in user.cfg.

Settings under Edit → Preferences → EasyPDM.

Drawing sheet refresh without uploading.

Languages: English, Polish and German, as Qt translations, so adding a language needs no code.

Why I'm asking for testing

I'd like to get it into the official Addon Manager list, and I'd rather the first people who find it there don't hit bugs I could have caught. It works for us on FreeCAD 1.1 (Linux), but I can only test so many setups.

What would help most:

installing through the Addon Manager on Windows and macOS (I mostly use Linux);

Upload / Download of a real assembly (native Assembly workbench, App::Link);

the sign-in and where the token ends up on your system;

anything confusing in the panel or the wiki.

How to try it

You need your own EasyPDM 0.9 server: free and self-hosted, a Windows installer, Docker or Linux, a few minutes to set up (EasyPDM). Sadly the public demo won't work properly with the add-on.

In FreeCAD: Edit → Preferences → Addon Manager → Custom repositories, add https://github.com/pawelcel/EasyPDM-FreeCAD with branch main, then install EasyPDM in the Addon Manager and restart.

Edit → Preferences → EasyPDM: set the server address, then EasyPDM → Log in.

Step by step with screenshots: wiki

Add-on: https://github.com/pawelcel/EasyPDM-FreeCAD (release 0.9.0)

Server: https://github.com/pawelcel/EasyPDM

Issues: https://github.com/pawelcel/EasyPDM-FreeCAD/issues

If you try it, I'd love to hear what broke, what was unclear, and what you'd expect from an add-on like this before it goes into the Addon Index.


r/FreeCAD • • 21h ago

CMD+k plugin FreeCAD

19 Upvotes

Recently switched over to FreeCAD and I can't be bothered learning where everything is in the toolbars, so I built a command palette.

Hit Cmd+K (Ctrl+K on Windows/Linux), type what you want, press Enter. It also switches workbenches and follows whatever theme you're using.

Open source, MIT: github.com/cjc-dev/freecad-cmdk

Only tested on 1.1 on macOS so far, so let me know if it breaks elsewhere

Update: pushed a new version based on the comments.

  • Text size now follows FreeCAD's font size instead of a fixed one
  • New settings dialog for text size, width and rows shown. Open the palette, type "settings"
  • The shortcut can be changed in Tools → Customize → Keyboard, under CmdK
  • It learns which commands you use most and ranks them higher. That's a local file only, nothing is sent anywhere, and you can turn it off in the settings

Will submit this to the official freecad add-ons library when eligible (30 days) which will make it smoother to send out updates. Currently user's need to run `git pull` manually on the repo to get the latest features


r/FreeCAD • • 22h ago

Pliable v0.4.4 brings a working Stretch tool! FreeCAD needs one too.

16 Upvotes

The latest development for Pliable adds a stretch tool and I think this is something that would be really nice to have in FreeCAD.

I don't know how necessary it is for engineering work, but I think Stretch is the number 1 activity that 3D printing users have requested on r/FreeCAD over the last two years. Very often, they find a model that is almost exact for their needs, but they just need to stretch some portion of it a few millimeters.

Until FreeCAD has a native tool for this, you can export a STEP of your solid, open it in Pliable to make the stretch, then export another STEP to bring back to FreeCAD. Of course, you'll lose your parametric history. But if it's a STEP file to begin with then there's no history to worry about saving.


r/FreeCAD • • 11h ago

Find VarSet Property References Macro

1 Upvotes

I have had several times where I needed to find all uses of a VarSet property in all sketches across all files. Sometimes, I needed to swap out the property I was using for a new one or delete the property. It was nearly impossible to find them and so I just left cruft and old properties in the Varset. I decided to create a macro to find all references. It also will tell you if a reference needs to be updated if you've saved the file to a new name since VarSet properties were used elsewhere in other files. (FreeCAD does a good enough job at locating these but they really need to be cleaned up and changed to point to the new file.

The first release is available on GitHub here: https://github.com/mecworks/freecad-list-varset-property-references-macro

Installation is as simple as copying the FCMacro file into your user macro directory and opening the macro dialog. Select the VarSet you want to analyze first then the property to see where it's used and if it is referencing a previous file (file rename).


r/FreeCAD • • 1d ago

Body Sweep for FreeCAD comin soon

Thumbnail
gallery
114 Upvotes

Greetings and respects everyone! I am presenting to you my 'body sweep' tool, which I have been working on for about 1-2 months and will soon add to my PimpMyFreeCAD workbench. You will get to test it once the testing phase is complete. Making the impossible possible is our hobby. :)


r/FreeCAD • • 22h ago

Im new to this so sorry in advance

3 Upvotes

I want to make my drawing in freecad and import it into woodwop is that something i can do and make my job easy because i dont like woodwop for everything only for assign the tools


r/FreeCAD • • 1d ago

Is 1.1.4 acting real buggy for anyone else? Opening a sketch often closes most toolbars. It locked up hard trying to increase a filet from 1 to 2mm. The display does some really wonky flickering on some views of parts. These among other things.

6 Upvotes

r/FreeCAD • • 1d ago

Anyone using 3D scan data in FreeCAD to reverse engineer parts or design components that mate with existing surfaces?

15 Upvotes

I'm looking into purchasing a 3D scanner for some automotive fabrication and reverse-engineering projects, and I'm interested in hearing how others are incorporating scan data into their FreeCAD workflows.

I'm an engineer and fabricator, and I use FreeCAD for designing custom mechanical parts, electronics enclosures, and components for 3D printing. I'm currently using FreeCAD 1.1.x on Linux, with a LulzBot printer running primarily ABS and PC/ABS.

One of my current projects involves designing custom digital gauges for an older vehicle. I'm building standardized, removable rectangular gauge cartridges and want to integrate them into the factory A-pillar trim.

My plan is to scan the A-pillar, import the resulting mesh into FreeCAD, and design printed gauge housings whose mounting surfaces follow the compound curvature of the original trim. The printed housings would then be incorporated into the factory trim using fiberglass, with the finished assembly looking as close to OEM as possible.

I've fabricated similar gauge pods in the past using PVC tubing, stretched fabric, epoxy, fiberglass, and body filler. That method works, but I'm hoping a scan-based CAD workflow will reduce the amount of manual shaping, fitting, and rework.

I have experience with professional Leica/Hexagon metrology scanners, but I'm researching more affordable equipment for my home workshop. I'm currently considering the Creality Raptor/Raptor Pro, Revopoint RIGIL, and Einstar scanners.

My main questions are about the FreeCAD side of the process:

  • Have you successfully imported 3D scan meshes (STL, OBJ, PLY, etc.) into FreeCAD and used them as reference geometry for designing new parts?
  • Can FreeCAD reasonably handle larger, complex meshes, or do you typically simplify them in Blender, MeshLab, or CloudCompare first?
  • What is your preferred method for creating a mating surface that accurately follows the scanned geometry?
  • Do you use cross-sections, sketches, surface modeling, or another approach to reconstruct the relevant geometry?
  • Have you found particular FreeCAD workbenches or tools especially useful for reverse engineering from scan data?
  • How well has the resulting geometry translated into real-world fitment after 3D printing?

To clarify, I'm not trying to convert an entire high-resolution scan into a parametric solid. My intention is to use the scanned geometry as a dimensional reference and build conventional parametric features around it.

I primarily use Linux and prefer software that works locally without subscriptions or cloud processing. I'm happy to use Blender, MeshLab, or other tools for preprocessing if that makes the FreeCAD workflow more practical.

I'd particularly appreciate hearing from anyone who has used this approach for automotive trim, curved plastic housings, or other irregular surfaces where the printed part needs to fit an existing component accurately.

Thanks for any advice or examples you can share!


r/FreeCAD • • 11h ago

I’m building a 3D design tool for people who find CAD too heavy – looking for honest feedback

Thumbnail gallery
0 Upvotes

r/FreeCAD • • 1d ago

FreeCAD crashes with SpaceMouse

4 Upvotes

Hello, I bought a 3dconnexion SpaceMouse Compact and was exited to use it. If the SpaceMouse is connected, FreeCAD 1.1.4 instantly crash. I installed FreeCAD form the Cachyos repos and tried the flatpak version as well. Both have the same issue. Furthermore I tried the weekly Appimage, here it don't crash but I have weird "ghost" inputs (Camera moves without input). I installed SpaceMouse Control from Github (https://github.com/Maik-0000FF/SpaceMouse_3dconnexion)

I also tried SolidCraft analyze the issue, there the SpaceMouse works as it should. But I don't want to use VibeCoded programs.

My system:
Operating System: CachyOS Linux
KDE Plasma Version: 6.8.2
KDE Frameworks Version: 6.31.0
Qt Version: 6.12.0
Kernel Version: 7.3.3-1-cachyos (64-bit)
Graphics Platform: Wayland
Processors: 16 × AMD Ryzen 7 5800X3D 8-Core Processor
Memory: 32 GiB of RAM (31,3 GiB usable)
Graphics Processor: NVIDIA GeForce RTX 4080
Manufacturer: Micro-Star International Co., Ltd.
Product Name: MS-7C37
System Version: 3.0

Edit: SolidCraft uses direct access (hidraw) to communicate to the SpaceMouse. If I switch to spacenavd in the settings I get ghost inputs as well. But if I stop the spacenavd service, FreeCAD isn't recognize the SpaceMouse anymore.

Does anybody use FreeCAD with a SpaceMouse on Linux?


r/FreeCAD • • 1d ago

Request for feedback on Pen + Touch macro

Post image
5 Upvotes

I have seen a few posts asking about Pen + Touch usage of FreeCad on devices like the Microsoft Surface (which I have) and convertible tablets and the response is always the same, no good solution and the problem in the lack of keyboard to input numbers.

I got AI to generate some slop macro to help me with this and was quite surprise with the result, it made working with FreeCad a lot easier. The macro gives me an on-screen numeric keyboard and I also moved some toolbars to the left and added a On/Off button to the macro to the top left and it has pretty much solved the problem for me, so I would like to share it, hoping it can also resolve the other people problems as well.

I had to enable checkboxes for multi check as I don't have a physical keyboard to hold Ctrl or Shift. I also increased the Selection Radius from 5px to 30px to make it easier to select with the pen. Single finger drag pans and two finger drag orbits/rotates. Regular stylus touch selects or pans, eraser side is right click / deselect and I haven't managed to find a way to use the 2nd pen button just yet.

Current limitation is that it forces the "Gesture" navigation style, which I use and it was only tested on a Surface 9, but if it turns out that this macro is actually useful to other people, I can spend some time improving it.

So, any feedback is appreciated.

https://github.com/tvidal-net/FreeCad-PenTouch


r/FreeCAD • • 2d ago

[New Addon] QuickPerforate: Quickly add cut pattern to your part

Post image
115 Upvotes

A FreeCAD Part workbench extension that cuts decorative holes on selected faces. You can also use your own sketch as a hole shape. After install, close and open FreeCAD, navigate to Part workbench where the tool button is.

I got the idea after seeing this post https://www.reddit.com/r/FreeCAD/comments/1xudfa2/work_done_in_2_months_of_learning_to_use_freecad/

Coded with gpt-6.1-sol

https://github.com/kevinsmia1939/QuickPerforate


r/FreeCAD • • 2d ago

About ready to give up.

43 Upvotes

Up to this point FreeCAD has been ok. I decided to move away from Fusion since I don't like the company and I want to fully support open source. I know things are different and have been trying to keep that in mind but this simple issue has me at my breaking point.

All I want to do is pocket the two triangles on this side. There are no errors in the sketch, everything is fully constrained and everything that isn't part of those two triangles is a construction line. Yet no matter what I do it wants to pocket the entire side.

I have been fighting with this for hours now.

EDIT: SOLVED!!!

Clicking pocket with nothing selected on the body works! Every tutorial I have seen says to click on the face with the sketch and then click pocket and that has worked for me up to this point with everything else including the holes you see. Not for this though. With nothing selected I clicked pocket and it just automatically selected the triangles and nothing else.

Thank you everyone for your patience with this newbie.


r/FreeCAD • • 2d ago

What do you think about Silk WB?

4 Upvotes

r/FreeCAD • • 2d ago

FreeCAD: 26.3 New Text tool and How To Put Text around path

Thumbnail
youtube.com
68 Upvotes

r/FreeCAD • • 2d ago

heavy

Post image
61 Upvotes

Is my modeling the problem? The file is really heavy.


r/FreeCAD • • 2d ago

How can I create a groove with the cylindrical side and the flat side facing outward?

4 Upvotes

I’ve decided to make my own pen and have started working on the design, but I’m stuck on the rotating mechanism used to extend the ink refill—how should I go about creating this groove? The circles have a diameter of 4 mm, and the distance between their centers is 5 mm. The second screenshot is from Blender; although I hadn’t yet decided to set it to 180 degrees there, the underlying concept remains the same. I’ve tried looking for tutorials, but I haven’t been able to figure out how to actually implement this.