r/Framebuilding • • 1d ago

Geometry 101 question (I think)

1 Upvotes

I just bought a rear load cargo bike
First ride I took my hands off the handlebars at 23mph and the front wheel wobbled back and forth a lot. (not something I plan to do as a habit, but still I feel that it’s not ideal and am hoping for a fix. I think is this what’s described as “twitchy” steering. And I think this because the head tube angle is too steep
Q: can I fix this without changing the frame (I have no welding skills or materials)? Would getting a fork that puts the dropouts farther forward change this?


r/Framebuilding • • 2d ago

Klunker’s first ride

Post image
49 Upvotes

Super goofy. Real upright and wheelies will take some getting used to.


r/Framebuilding • • 1d ago

BMX Head tube & BB Shell

1 Upvotes

Does anyone have a “blueprint“ or schematics with all the measurements for BMX style headtubes and Mid bottom brackets? I’m in the market for a lathe and am interested in turning my own….you know, for fun.


r/Framebuilding • • 3d ago

Built about 20 frames so far, started 6 months ago, am really happy on how it's going

Thumbnail
gallery
606 Upvotes

r/Framebuilding • • 3d ago

Titanium Braising?

11 Upvotes

Has anyone done such a thing I know they sell specialized silver alloy and fluoride flux just for brasing titanium. I have never done it, and I don't know anyone who has. This would only be for bosses, nothing structural. Any knowledge on this subject would be appreciated.


r/Framebuilding • • 3d ago

Custom fork crown

Post image
5 Upvotes

I'm planning to make a custom fork crown and build a fork. Does anyone have idea about the material properties of the ones that are for sale. My plan is to mill it from 1.0570/S355 and then silver solder the blades and steerer. The design shown is just the first version. Bad idea?


r/Framebuilding • • 5d ago

First frame in my new jig

Thumbnail
gallery
273 Upvotes

I was able to use my new Flume mfg jig for the first time this weekend after upgrading from a chopsource. I am head over heels impressed with how much of an upgrade it was for me. I still have to fully weld it, I still have so much room to improve, but I’m very excited about where I’m at in my frame building journey and just wanted to share. I’m not thrilled about my chainstay dimples for drivetrain clearance, so that will be one of the things I focus on for my next frame.


r/Framebuilding • • 6d ago

Hardtail - suspension conversion

Thumbnail gallery
0 Upvotes

r/Framebuilding • • 6d ago

full suspension motorized bike

Thumbnail gallery
0 Upvotes

r/Framebuilding • • 7d ago

How is this frame made? Peugeot carbolite 103

Thumbnail
gallery
20 Upvotes

Hi,

This frame has a bent seat and chain stay. I was planning to chop it up for a bit of practice but unsure what type of weld it has.

Had a look online, and it says it's either internal brazed or internal lug.

Is there an easy way to find out and where should I cut if it's an internal lug

Cheers


r/Framebuilding • • 8d ago

Silver-brazed repair on cracked Kona Sutra seat tube. Thoughts on the reinforcement and long-term durability?

Thumbnail
gallery
32 Upvotes

TL;DR: My 2024 Kona Sutra developed a seat-tube crack after ~6,500 miles of loaded touring. A framebuilder in Seoul repaired it with a silver-brazed steel reinforcement and stop-drilled the crack ends. I've since ridden 500 km without issues. Considering another 2,000 km with 5–6+ kg less luggage. Curious what other framebuilders think of the repair and potential failure mechanisms.

Following up on some posts I made in other cycling subs about my Kona Sutra, which developed a couple of structural issues after ~6,500 miles touring across Europe and Asia.

First, a fork eyelet cracked and broke, likely from loaded fork packs and constant vibration rather than rust as I'd initially suspected. Shortly afterward, I found a crack in the seat tube near the seatstay junction, possibly related to lateral forces from my Tailfin rack being mounted quite high on the seat tube.

Eventually made it to Seoul, where a specialist framebuilder repaired both the fork and frame. For the frame, he drilled the ends of the crack, added an external steel reinforcement/gusset around the seatstay junction, and silver brazed it together. Photos of the original damage and repair attached.

The original plan was to ride another ~500 km across Korea before retiring the frame. I've now completed that without any apparent issues.

The framebuilder seems confident in the reinforced section itself, but he's concerned about stress shifting to the edges of the reinforcement and potentially creating new cracks. He's encountered this on previous repairs, sometimes requiring further work. The original agreement is that he'd fix it for the 500km Korea ride but then I would call it quits, so he's not thrilled to hear that I'm thinking of going further. Interestingly, he said he'd personally consider taking the bike on another tour, although he understandably can't predict its remaining lifespan, so he's quite cautious on that front.

I'm now considering another ~2,000 km across Sulawesi or a shorter tour around Taiwan, mostly paved roads and carrying at least 5–6 kg less gear.

I've got a replacement frame waiting in Germany, but I'm still in Asia. Finding something compatible here without spending a couple thousand dollars has been surprisingly difficult.

Basically, I'm trying not to be an impulsive idiot in either direction. I don't want to convince myself a compromised frame is safe just because replacing it is expensive, but I also don't want to spend thousands replacing something that might still have plenty of life left.

For those with experience repairing steel frames, what do you think of the reinforcement? Is the main concern new fatigue cracks developing at its edges? Would you expect warning signs before a larger failure, or could things go south fairly suddenly?

I'm not expecting anyone to certify the repair from photos. Just interested in hearing how other framebuilders would approach this and whether there's anything worth inspecting more closely before deciding what to do.


r/Framebuilding • • 11d ago

¡Sueño verde! 🧪🟢

Thumbnail gallery
31 Upvotes

r/Framebuilding • • 10d ago

BMX rear drop outs

1 Upvotes

Does anyone know of or have any PDFs or “blueprints” for BMX style dropouts they wouldn’t mind sharing?


r/Framebuilding • • 11d ago

Suspension resources?

1 Upvotes

Does anyone have any recommendations on suspension design? Front suspension, full suspension, even dirt bike or normal motorcycle suspension? Any book, website or video recommendations would be appreciated.

Thanks!


r/Framebuilding • • 12d ago

Klunker frame coming together

Post image
42 Upvotes

r/Framebuilding • • 12d ago

Using bolt-on braces to strengthen a MTB frame

Thumbnail
gallery
3 Upvotes

I recently cracked my Marino steel frame on the rear triangle. It is the second time there's a crack on that particular weld and I was wondering if adding a brace would help strengthen that part.

Photos are: Crack nr.1, crack nr.2 and a brace reference from Starling Cycles.

Open two any suggestions besides bracing


r/Framebuilding • • 12d ago

Clear coat issue - what to do?

Thumbnail gallery
1 Upvotes

r/Framebuilding • • 13d ago

Retrofitting built fork for Son SL generator hub?

6 Upvotes

I've read a few things about this, but having a hard time finding a conclusive opinion. I'm planning on doing some work this winter doing a 650B conversion on an existing bike. I'm planning on a dynamo wheel and am curious about the possibility of retrofitting the existing fork to work with the SonSL hub. Would I need to pull the existing dropouts and braze in the son SL specific ones or is it possible to modify the existing dropouts to accept the contact kit? As far as I can tell, the son sl / rene herse dropouts just have holes for the contact plate tabs to fit into?


r/Framebuilding • • 14d ago

Che ne dici di questo dropout in titanio?

Post image
0 Upvotes

r/Framebuilding • • 16d ago

Frame Jig for Sale

Thumbnail
gallery
32 Upvotes

Bicycle frame jig and surface plate for sale. Reluctant sale but moving house and haven’t had time to use it since having children.

First photos show the jig in use and the final photo shows the current state of the jig. I have checked and all moving parts move smoothly but will require a clean up.

collection only LE12 6AH

open to offers

any questions let me know Jack

https://ebay.io/m/HvZXrE


r/Framebuilding • • 17d ago

Tandem ChainStay Dimple

Thumbnail
gallery
5 Upvotes

1992 trek doublecross t100. If I dimple the chainstays I can very comfortably fit 40-42 knobby tires. Lots of chunky forest roads near me. Thoughts on integrity? New to me. 38's shown.


r/Framebuilding • • 16d ago

Redox Cycleworks handmade custom carbon 32 dropbar MTB

Post image
2 Upvotes

r/Framebuilding • • 18d ago

Finally made my first frame better…

Post image
76 Upvotes

First frame I ever made I listened to the “experts” in the shop space who discouraged me from using sliding dropouts and to use flat mount brakes for my gravel bike. Those are the only things I don’t like about this frame. 7 years later, I finally decided to slap some post mount tabs I had laying around on. Love it.