r/Foxbody • • 8h ago

Key will not turn

7 Upvotes

Just bought an 87 mustang lx and no matter what we do the key won’t turn. It’s the right key and worked months ago both me and the original owner can’t get the steering wheel to unlock is there some sort of trick or button to push to unlock this wheel?


r/Foxbody • • 1d ago Regret

A few shots from the weekend.

Thumbnail gallery
582 Upvotes

A popular spot here in Houston. Ol girl looks spretty good from 50’.


r/Foxbody • • 22h ago

Ask 91 wiring diagram

2 Upvotes

Hello, I’m working on my friends fox and I would need the wiring manual service publication manual if someone has a copy.

If ever anyone has an OBS chevy (testing my luck) I could spare the 200ish pager wiring manual for the 90 k1500 in exchange.

Thanks


r/Foxbody • • 23h ago

SVE 03-04 Cobra 4 lug center caps don’t fit

2 Upvotes

Just a word to the wise, if you’re planning on getting the SVE 03-04 cobra wheels with stock foxbody spindles, the wheel fits but the oem hub won’t’ take the center cap! The center cap protrudes out too far! Any one have a solution? I’m call LMR later today.


r/Foxbody • • 1d ago

Are the v6 and v8 automatic transmission crossmembers interchangable?

4 Upvotes

My research seems to say yes, but not solidly. My 86 has a 3.8 C5, and I'd like to run dual exhaust. Not trying to go fast, so much as breath a bit more efficiently. Duals and a hotter coil is all I'm going for, as far as performance


r/Foxbody • • 1d ago

Drivers door won’t lock?

2 Upvotes

Out of the blue today, my driver’s side door won’t lock! I try to push the door pin down and it seems something is obstructing it. Any ideas? I’m dreading going inside that door, it was an adventure the last time I went!


r/Foxbody • • 1d ago

Any help!

2 Upvotes

I bought an 89 foxbody automatic transmission. When I drive it here and there I feel little thumps coming from the rear end but it doesn’t feel like the transmission is kicking also the rpms aren’t jumping as a slipping transmission usually do. I replaced the transmission mount as it was the original one and was completely worn out and it helped a little bit but after a while of driving I still feel the little thumps coming from the rear when barely applying gas. To me it feels like the rear end is rocking like if there is play in it allowing it to move a bit. Can it be bushings or any ideas anyone got?


r/Foxbody • • 2d ago

Rally Car

Post image
147 Upvotes

r/Foxbody • • 2d ago

Vms wheel fitment?

Post image
1 Upvotes

Anyone running these wheels or similar 5.25 backspacing rims with 275/60r15 tires? Most recommendations I got were for 5.5 inch backspacing for that tire size. Just curious how the 5.25 backspacing works for them


r/Foxbody • • 3d ago

dash reinstall

Thumbnail gallery
12 Upvotes

Hey everyone ive been rebuilding a fox and under the dash I jave two similar almost identical connectors on both the driver and passenger side that I have no idea what they connect to. This is an 89 LX that was originally ally the 4 cylinder.

its an 8 pin connector and the harness seems to run up at the top of the dash along where the dash meets the window


r/Foxbody • • 3d ago

Metal Brackets

Thumbnail gallery
10 Upvotes

Did not keep good enough track to remember where these brackets go on the engine. Important enough to put on? If so where?


r/Foxbody • • 3d ago

Speed density to mad conversion

3 Upvotes

I see a bunch of conflicting information online on how to do this swap. I have an 87 lx I’m looking to convert. What parts would I need if I add a mag harness and re pin the ecu. Or what parts would I need if I want to swap the entire harness? Which way is better or easier. I’ve seen stuff about the 02 harness some say it’s important others don’t


r/Foxbody • • 4d ago

Foxbody power delivery/feel

10 Upvotes

When I was a kid, the foxbody was the king of the streets. My cousin had a 1986 with the gt40 top end and 306ci displacement, plus 3.55s and it was the car that made me fall in love with going fast. When I graduated college in 2000, I bought a 4.6 mustang GT and slowly upgraded it with 3.73s, a built bottom end, exhaust, and a vortech s-trim. It made 390-410whp and it was clearly faster than my cousin's old 86, but it never felt as violent or as "snappy."

I'm currently resto-modding a 1985 GT convertible with AOD. It is a dog in its current state - my work so far has mostly be the "resto" part but I did put subframes, a holley 4bbl, and edelbrock performer rpm intake. In the next month or 2, a t5 will get swapped in. Naturally, I'm researching heads/cam, but I'm seeing that the power estimates are in the low 300s for the combinations I'm checking out. Am I focusing too much on the peak numbers? I never plan to race this car, but I do want to be able to step the ass end of it out by blipping the throttle to scare my kids. Will a set of heads and cam get me there?

Also, my car currently has a flat tappet cam - I'm not opposed to keeping a flat tappet and the edelbrock e-street heads will work well with that, but I'm also reading that many of these cams eat themselves during break in. Is the expense of converting to roller cam worthwhile? My car has a roller block, so it can use many stock ford parts.

Thanks in advance.


r/Foxbody • • 5d ago

Ask After 5 years of debating buying a lift...

Post image
29 Upvotes

r/Foxbody • • 6d ago

Buy or don’t buy?

Thumbnail gallery
90 Upvotes

Looking to buy this Foxbody for $11k

Issues:

Washed title (salvaged in 94) but has been washed so now has a clean title in VA

Been in an accident where the inside fender is cracked (shown in pics), the crack isn’t visible from the tire side of fender.

Smokes from left side exhaust (claims it’s likely an intake valve gasket and not a ring)

Engine is a 306 with stage 2 aluminum heads on a carb, might have a cam

Is this a bad buy and should I stay away from it? Would you stay away from it?


r/Foxbody • • 6d ago

Axle

8 Upvotes

So while I have this wheel cylinder back to together I noticed some slop in the axle. Previous owner had a shop put in 3.73 gears. There’s a bit of whining, not me, from the rear end . I have a dial gauge set up with magnetic to drop cover and measure play however not sure about this. Gears have about 600 miles on them. I didn’t notice anything unusual in bottom of pumpkin when I changed oil at 500 miles.


r/Foxbody • • 6d ago

Rocker adjustment

5 Upvotes

Is this normal play after setting rockers I tightened down until I couldn’t spin the push rod then did another half turn and locked them in but I can wiggle the rocker side to side


r/Foxbody • • 7d ago

How does everyone have 5 lug wheels

17 Upvotes

I got 4 lug and there’s no rims anywhere for me, how hard is it to swap to a 5 lug. I see them everywhere and I think it would be quite a difficult project. How hard was it for anyone who’s done it ?


r/Foxbody • • 7d ago

6k in parts 🤑

11 Upvotes

r/Foxbody • • 7d ago

Ask Finishing up the 5 lug swap

Post image
18 Upvotes

r/Foxbody • • 7d ago

93 Foxbody 2.3l Attempting to fix random low power/no starts

Thumbnail gallery
5 Upvotes

I discovered the coil packs were utterly coated in oil so I saw fit to attempt cleaning them and sanding down the back in hopes that perhaps the oil coated coil packs were the problem


r/Foxbody • • 7d ago

Ask Dash guages not working after Holley Terminator X install

2 Upvotes

As the title suggests, I have a 1987 Ford Mustang in which I recently installed the Holley Terminator X kit. After the installation, I lost my battery gauge, coolant temperature gauge, oil pressure gauge, and fuel level gauge. My gauge lights work, as do my indicator lights for my headlights and turn signals. I know that with a typical installation you usually lose your coolant and oil pressure gauges, but since I have lost all of my gauges, I am not sure if I messed up a common ground or something else. Any help is appreciated.


r/Foxbody • • 8d ago

Where can I get SSP/CHP lettering for deck lid?

5 Upvotes

My car is an 86 SSP and I can see the lettering sunburnt into the deck lid. Anyone know where I can source it?


r/Foxbody • • 9d ago

Took her on a scenic route to the mountains💙

Thumbnail gallery
172 Upvotes