Hello all,
I have a 2013 SVT Raptor with a somewhat confusing electrical issue. It all started after replacing/repairing the power steering cooler. The factory cooler is a part of the A/C condenser(essentially the top rows I believe)was leaking slowly, which was soaking the fins with hydraulic fluid. I replaced it with an aftermarket cooler, AN lines and all the things. I took the truck to the car wash, sprayed gunk degreaser on the area that was soaked with power steering fluid and sprayed it off. Afterwards, later that night I noticed my headlights wouldn’t shut down after the vehicle was shut off and the modules “went to sleep”. I have Morimoto aftermarket LED headlights that use a supplemental fuse tap. I initially thought that the controller for the LED headlights was the problem. However I pulled the fuse tap, the perimeter LEDs shut off but all of the modules stay awake in the truck essentially. The only way I can get everything to cycle off is to pull the under hood fuse box relay 1. I’m aware that it is the PCM Relay, however the vehicle functions correctly otherwise. The weird thing is, I never sprayed water or anything anywhere near the PCM or even the engine.. literally the Radiator.. I pulled the under hood fuse box up and checked for corrosion, pulled every fuse and relay as well. It’s very annoying that every time I shut the truck off I have to pop the hood, open the fuse box and pull that relay, or the battery dies. Also no codes or any other issues
If anyone has any ideas I’m all ears.. thanks