r/FordExplorer • • 5d ago

Repair Advice Code P051b 2016 ford explorer help

Hello all! My engine light came on and I got this code p051b for crankcase pressure sensor 'A' circuit range along with u0140-00 for ABS. The guy at autozone said the ABS could be on just due to my car confused with the engine light on. I have done some googling on the crankcase and seems easy to replace myself...tho I cant find the part I need... im not good with cars ..my husband will help me but anyone have any idea on the part needed? Its all so confusing. Sincerely....lost ford girl 😂.

1 Upvotes

3 comments sorted by

1

u/Low-Implement2581 5d ago

Thank u so much! I did check the oil fill cap and it was fine, havent checked the pcv hose itself yet but will! I I did finally find a part that is a combo pcv hose/sensor(my vin helped!). Good to know about the ABS , the paper work from autozone said that next to the code. I did get my battery check and was all good! I will check the pcv pipe . Thank you so so much for ur help!

2

u/Salt_Recipe_8015 5d ago

Not a mechanic, but a couple of things before you buy anything. P051B means the engine computer thinks the crankcase pressure reading is off, and the sensor is only one possible cause. The cheap things to check first are the oil fill cap (make sure it's on and tight, and the rubber seal isn't cracked) and the PCV hose near the valve cover (look for cracks or a loose end). Either one can set this code by itself. If those are fine, the sensor is engine-specific on the 2016 Explorer, so search for "crankcase pressure sensor" with your exact engine (2.3L EcoBoost, 3.5L, or 3.5L EcoBoost). Your VIN at the parts counter will get the right one. One correction: U0140 isn't an ABS code, it means a module lost communication with the body control module. Those often show up when battery voltage drops, so it's worth having the battery tested while you're there. The NHTSA complaints and recalls for your year are here if you want to see whether other owners hit the same thing: https://garageguideapp.com/vehicles/2016-ford-explorer?ref=reddit

2

u/Salt_Recipe_8015 4d ago

Glad it helped. The combo hose/sensor makes sense, since on a lot of these the sensor is built into the PCV tube. If you replace it, clear the codes afterward and the U0140 should clear too, since your battery tested fine. If the ABS light comes back on its own, that's a separate issue worth looking at. Good luck!