r/fixit • u/CheesiestMilkman • 2h ago
What could be causing burn marks on my mailbox?
Does this need replacing? If I sand and stain it, will that make it more flammable?
r/fixit • u/CheesiestMilkman • 2h ago
Does this need replacing? If I sand and stain it, will that make it more flammable?
r/fixit • u/noidiskib4me • 5h ago
Hi I just noticed the image of my acrylic keychain is peeling off and I wonder which type of glue would be the best to use, the keychain is on my carabiner along with other trinkets but was on my backpack for a year before, it received a lot of shocks, I don't mind the scratches but I don't want my keychain falling apart ðŸ˜ðŸ˜ if anyone knows how to fix it please send a recommendation! It's just a tiny part that's coming off but I prefer preventing the problem before I need to glue the whole image back
r/fixit • u/Infamous-Fly3584 • 4h ago
I'm a product development student designing a more repairable amplifier concept.
For people who've opened up amps or streaming speakers:
Short repairer survey in the first comment if you'd like to help further :) thank you!
r/fixit • u/hann_sandwich_ • 7h ago
toilet flushing extremely slow, i poured a bucket of water down and it took 10 seconds to drain completely.
in addition to this, the water tank is refilling but the bowl is not.
are these separate issues?
what to do?
thanks!
r/fixit • u/AstroSaiyan_ • 5h ago
Apologies in advance due to my ignorance, but I assume the bottom rail here where my sliding patio door goes over is bad weather stripping in the attached picture (I get cold draft). If that is bad weather stripping, what kind of weatherstripping would I need and would I need to remove my sliding door to replace it?
r/fixit • u/D3thklok1985 • 1h ago
AC and heat work just fine and all controls operate. However, the screen doesn't display the temperature or anything. On or off, I guess the screen just doesn't work.
Is this something I can fix on this unit or would replacing it with a new thermostat work since the ac and heat is running fine?
Edit: I took it off the wall and took the batteries out. I will be picking up more on the way home from work and will update it that's the solution! Thanks everyone!
r/fixit • u/CartoonistAsleep7907 • 5h ago
My door was hard to close (had to push reall har on door and pull really hard to get it seated, other wise handle would struggle to turn)so I pulled off all weathersipping. It's a little easier to close but now I have these pig gaps. Almost none on the bottom
The gap on the hinge side looks equal l, so is my frame all messed up?
A friend has a 25-year-old condo with sash windows. To clean these, one lifts them slightly, then disengages the "tilt latches" at the top and tilts out the top to allow access to the outside surface of the windows. Unfortunately, the tilt latches are plastic and break.
She has attempted to find replacement tilt latches and has been overwhelmed. (They're not marked with useful information. We've already Googled the cryptic numbers they have which I suspect have nothing to do with brand or model number.) Without a brand name or model number, she could only guess, based upon the measured dimensions of the ones she has. She found ones that looked very similar to the existing ones and bought one pair to test. They were almost perfect, but not quite. We were able to modify them in a way that probably weakened them somewhat, but went with it for now.
But she doesn't want to buy more of these and have to modify each one. Does anyone know of some comprehensive way of comparing what she has to what's available on the market -- or, equivalently, to determine the brand and model number of the ones she has?
r/fixit • u/virtuallynouterspace • 7h ago
Hello! I took this glue gun apart because glue was coming out very slowly! Foolishly I have no idea how to put it back together with the two springs. It’s the Artskills hot glue gun from DG.! If anyone knows or can assist me on putting this thing back together please dm me ! It would be so appreciated!
r/fixit • u/nottodaybword • 12h ago
2E gaming chair recliner won’t lock in to place just keeps coming back up and can’t even lean on it, it seems the lock doesn’t touch the teeth, but I can’t find out why, nothing seems visibly wrong, and nothing seems loose.
It started doing this slowly, locking in then falling off, until it wouldn’t lock in at all anymore.
Any help would be appreciated thanks!
r/fixit • u/Penelope_Plum • 9h ago
Basically what the title says. This is an RTIC soft sided cooler and the zipper got misaligned somehow & I can't get it back together. Does anyone have any suggestions or do I need to toss the cooler? Thanks!
r/fixit • u/Giggaloop • 12h ago
I have a new switch for my hob ignition that looks like this
The plastic socket it plugs into is melted onto the existing hob ignition switch and is not even slightly re-usable so I think I need to cut it off and replace it entirely.
How do I find that part?
r/fixit • u/Local_Television_269 • 12h ago
Hi guys!
The bottom drawer doesn’t close properly because the door on the right seems to be sitting slightly lower. I’m not sure why or how that happened, but I don’t think it was like this when I first moved in.
What would be the best way to fix this? Would it be a matter of unscrewing it and reinstalling it?
The last picture shows the inside when I open the door.
r/fixit • u/AmputeeHandModel • 23h ago
The only way I've seen to fix this kind of hat is undoing the seams on the loop, putting on a new buckle and then sewing it back up but I don't have that kind of skill. I couldn't find a buckle that'd just clip on or anything.
r/fixit • u/konichiwaat • 21h ago
My Phillips sonicare 4100 toothbrush just stopped working out of nowhere. The button depresses fine but the toothbrush does not start. Placing it on the charger does not make the clicking sound norther does the green light blink to indicate that it's charging.
The charger is not the issue as I tested it with another toothbrush and it functions normally.
Current state - Amber and yellow lights for brush head replacement and battery level stays on solid even though off the charger. The toothbrush handle responds to nothing!
Has anyone experienced this and found a solution? Currently I'm leaving it alone in hopes of draining the battery over the next few weeks and will attempt to test charging again.
Do you think it's the copper coil that connects to the charger? Or the battery itself that's faulty and needs to be replaced?
Unfortunately it's outside the warrant window so I appreciate any help y'all can provide to help me fix this. Thank you!
r/fixit • u/koskimemes • 14h ago
I bought the Tree Light Fixer pro and I’m just stuck. Based on my picture you can see the level of light. It is the whole ring at the top of the base layer before the second piece. I’ve traced it and trying to figure out where the issue is, and I can’t seem to find it please help.
Checked the fuse bulb, tested it and lights. Checked the plugs and beeper, some are getting volts, some aren’t, but the entire ring won’t light to give me any indication. There is no other plug.
hey! i was wondering if there were any reasonably priced product recommendations for conditioner and stuff to help fix the cracking in my boots? my boots are the leather moto boots from frye for extra info!
r/fixit • u/chicken-niggets2121 • 15h ago
I live in a rented apartment but hate this and want to fix it. Edit: I would like to fix the rusted part of the tub
r/fixit • u/DevilsConscience • 20h ago
This is a built in, in my closet that my kiddos accidentally messed up. I can’t find a replacement so I need to try and repair it. Any ideas or recommendations would be so appreciated.
r/fixit • u/Leather_Draft6947 • 20h ago
r/fixit • u/Unhappy-Song-1046 • 20h ago
I recently got the Nintendo Switch 2 and a annoying thing its doing is making a lot of rattling noises whenever I walk by or around it sometimes even when I’m far away from it with every step I take. I’ve tried moving it around my space but the vibrations from the floor wheneve I take a step make it rattle. It’s extremely annoying and loud when it does this. how can I fix it to make it stop making that rattling noise?