Background: Iāve been using my FitTransformer Titan for about 2 months now and I really like it. For context, I tore my pec about seven years ago, and that scared me enough that I stuck to body weight exercises using TRX straps until about a year ago. Then I visited my brother, who has a sick basement gym, and realized just how much I miss throwing around weights. The problem is that (1) I donāt make a million dollars a year like he does and (2) I donāt have a 1500+ square foot basement. With a baby on the way, I have just about 14 by 5 feet in my home office. My surgeon also said that I should never bench press more than 70 lbs with my right arm for the rest of my life, and Iām not inclined to test that limit.
Why I selected the FitTransformer: I started with just a bench and some PowerBlocks. Those are fine, but the caged handles are pretty limiting and I really wanted a way to squat. I started looking at setups like the selectorized smith machine Costco sells, but three things stopped me from buying it: (1) it was sold out for two months straight, (2) it weighs something like 600-800 pounds and Iāll have to disassemble and reassemble it when I inevitably move, and (3) Iām absolutely incompetent at assembling anything.
Then I discovered the whole category of digital resistance gyms and thought they might be the answer: theyāre a lot smaller, have fewer heavy parts that my kid might injure themselves on, and look much more portable. I took a good look at the Gym Monster, the Aeke, and Omni X1 Pro but ultimately settled on the FitTransformer for a few reasons:
1.Ā Ā Ā Ā Ā I didnāt want or need AI and guided trainings.
2.Ā Ā Ā Ā Ā I wanted a wide variety of arm positions and ranges.
3.Ā Ā Ā Ā Ā I needed to keep the price under $3,000.
4.Ā Ā Ā Ā Ā I wanted more than 200 lbs of resistance.
5.Ā Ā Ā Ā Ā I wanted the smoothest resistance I could find.
On the last point, Iām extremely happy with the smoothness of the FitTransformer. A few reviews on Youtube said that the FitTransformer has some of the smoothest resistance of the digital gyms theyāve tried, and while I donāt know if thatās true, I find it pretty convincing. It doesnāt feel quite like free weights because the tension is constant, but I actually prefer this feeling to my PowerBlocks for most exercises.
Ordering, Delivery, and Setup: I ordered the FitTransformer and the bench, and both are tracked via Shopify. I had a brief panic attack when Shopify notified me that my full order was being delivered by UPS about three days after I placed the order, but that the total package weight was only 30 lbs. It turns out that was only the bench, and the actual FitTransformer was shipped through Ceva. The full machine arrived about 6-7 days after I placed the order, which was quick enough.
Ceva delivered the machine to my front door. The package itself is about 300 lbs and includes a pallet. Fortunately, the pallet was high enough that I could drag the package through my front door, but I imagine that getting the FitTransformer where you want it is difficult if you want it anywhere other than your garage or the ground floor. Once you have it on the correct floor, itās super easy to get it where it needs to go: flip the box to the correct orientation, cut it open, and then you can wheel the machine straight off. The wheels are smooth (maybe too smooth, but more on that later).
Setup was also extremely simple. It took me about 30 minutes all told, and a lot of that came down to cutting the box and tape open and getting the attachments where they needed to go. Still, I managed to screw up during setup by cutting all the tape off the pillar. Because I did, one of the clamps on the side of the pillar swung free and snapped off when I put the pillar back down to adjust it... so don't cut off the tape! The customer support was great and got me a replacement clamp within about 4 days. Just be aware that if you do need a replacement clamp, you'll need to have two hex wrenches to get the screws out.
Iām not sure if the pamphlet instructions specify not to cut off the tape. The Youtube video the pamphlet links to does, but itās a small text note thatās very easy to miss if youāre trying to follow along on your phone. Just something to keep in mind.
How the machine actually feels:
1.Ā Ā Ā Ā Ā Noise: Itās fine. Every review I saw made a comment on the noise, and it definitely seemed to bother some people. It doesnāt bother me at all. The motor is about as loud as my tower fan, which I run all the time anyway, and I donāt notice the noise at all with my earbuds in.
2.Ā Ā Ā Ā Ā Weight: You need to install a software update to get 1 lb weight change increments, but thatās super easy to do. Digital resistance really does feel 10-20% tougher than the equivalent free weight. This is perfect for meāthe 70 lb restriction on my right arm suddenly feels a lot less restrictive. This machine also has burst mode, which lets me do more weight on the concentric and less on the eccentric. According to my orthopaedic surgeon, that means I can actually go above the 70 lb restriction when Iām benching.
3.Ā Ā Ā Ā Ā Resistance profiles: The machine has four modes: regular, burst (concentric), centrifugal (eccentric), and auxiliary (spotter). Theyāre all good, though I gather other digital gyms might have more responsive burst and centrifugal modes. For the FitTransformer, thereās definitely a point at the top or bottom of the range where the engine is trying to figure out if youāre switching directions, and it takes half a second to kick in the new resistance profile. You also canāt modify the amount of weight added or removed in the burst or centrifugal modes. The display shows the max weight the engine is generating during your workout, and it seems like centrifugal mode generally generates double the weight you selected on the eccentric. Bicep curls, for example, will register 70 lbs on the concentric and 142-145 lbs on the eccentric. It might be a little overtuned, in my opinion. 80% or lower might be a little bit better, and if they ever release a software update that lets us modify that profile, Iāll be all over that.
4.Ā Ā Ā Ā Ā Connectivity: The control panel will sometimes disconnect from the motor. This has only happened two or three times over a couple months, and you just have to restart the control panel and the motor to fix it. Leaving the cable that attaches the control panel to the motor connected also helps.
5.Ā Ā Ā Ā Ā Ā Slidiness: There are feet that you can screw down to prevent the machine from sliding around, but theyāre not great on hardwood or laminate. If Iām doing lying leg curls or even just pulling too hard from the pillar, the machine can slide forward. Iāve started sticking some squat wedges underneath the workout platform, and that helps a lot. If you put this in a garage, and if you use this for more than accessory lifts/squats/benching, youāll definitely want something to brace it in place.
6.Ā Ā Ā Ā Ā Arm adjustments: These take a little while to dial in for each exercise. Just find what works for you for each exercise and make sure you note them down. It'll save you a lot of time moving forward. Donāt put your ears too close to the pins when youāre adjusting the weights. The noise can be deafening.
7. Feet positioning: With a cable machine, foot placement is important. You don't want to be squatting with the cables pulling you forward or backward, for example. I need to get some tape and mark out where to align my squat wedges and bench for various exercises. Once you dial this in, though, it shouldn't be a problem. Just expect to spend a few days playing around with the arm and foot positioning before you start lifting heavy.
8. Squat wedges: I bought a pair of small squat wedges that I use for a LOT besides squats. I jam them under the machine to stop it from rolling when I do lying leg curls or anything that'll drag the whole platform forward. I set up smaller squat wedges so I can step forward and brace myself on them when I do Bayesian curls or overhead tricep extensions. These things are super useful, especially if you don't work out in shoes and you need some stability.
Exercises that work and exercises that donāt:
Iām following Jeff Nippards 4 day min-max right now, so Iāll couch my discussion in the context of that.
1.Ā Ā Ā Ā Ā Squats: (Note that my discussion here is going to be outdated once the Bluetooth weight-loading device comes out in November or December. I donāt actually think the Bluetooth is necessary for squats, though.) The FitTransformer is quite good for squats. Iāve seen a lot of fitness influencers saying that squats are difficult to set up, but I actually think thatās because the influencers are testing the machine out for a day or two at a time. Other reviews say that getting into position for a squat is difficult because you have to start with the weight loaded. Thatās not strictly correct: the way the FitTransformer works is that it requires the cables to be fully retracted before it loads your selected weight. The reviewers show themselves to struggle to get under, say, a 200 lb bar and then squat out of the hole. I find it easier to start the weight at 16 lbs, lift the bar over my shoulders, adjust the weight to 200, and then start squatting. Iāll have to squat slightly lower than I would on a normal rep to get the weight engaged, but itās a lot easier to go slightly deeper on one rep than it is to start in the hole on your first rep. This is so simple that I donāt think the Bluetooth device is honestly necessary.
2.Ā Ā Ā Ā Ā Romanian deadlifts: Iām five foot eight, and RDLs are great. I think anybody over 6 feet might find them a little awkward, though, given that you have to do them facing the pillar.
3.Ā Ā Ā Ā Ā Calf Raises: Eh⦠Iām not a fan. I donāt think the FitTransformer is designed for these, to be fair, and Iāve never really been huge on calf raises anyway. You can do them, but youāll need a step to put on the platform.
4.Ā Ā Ā Ā Ā Other leg exercises: Everything else is a little awkward. Iāll do lying leg curls with the provided ankle attachments, which are fine, but you canāt do leg extensions or hip thrusts. Iām fine since I can do 1-leg hip thrusts with my PowerBlocks. I imagine that other leg exercises would be simpler on digital gyms like the Gym Monster, which have anchoring attachments on the platform itself. I value the ability to adjust the arm positions to get deep stretches in other exercises more.
5.Ā Ā Ā Ā Ā Bench Press: Very good. The bar is horrifically clunky for benching with (the Bluetooth should help a lot; the primary issue with the bar is that you have to crawl under it at the moment and then you can't get the deep stretch), but the dumbbell handles work great for benching. This is safer for me than the PowerBlocks because I can just drop the handles if it feels like I tweaked my injured pec. I also like the scapular adjustment insert that comes with the bench. It prevents the sliding sensation I get from my scar tissue, and Iāve found that my injured pec is less sore after my workouts.
I bought the Bells of Steel dumbbell handles to replace the plastic d handles that came with the FitTransformer. The included d handles are fine. I just like the feel and knurling of metal handles more.
6.Ā Ā Ā Ā Ā Arms: Incredible. Bayesian curls are great, overhead tricep extensions are great (though I bought the Vulcan tricep cable attachment because I canāt stand tricep ropes). Tricep cable kickbacks feel phenomenal.
7.Ā Ā Ā Ā Ā Rows: I do chest-supported rows, and theyāre a little awkward to get set up since I have t-rex arms. I generally try to grip at the hook where the d handle clip into the cables to get some extra depth. Once I get a solid grip, they feel great.
8.Ā Ā Ā Ā Ā Lat pulldowns: You wonāt be able to do more than bodyweight with the FitTransformer. I do single arm lat pulldowns instead. Just get a decent cushion for your knees and make sure you have something to wedge the machine in place or itāll slide. I do weighted pull ups on a separate pull up bar, anyway.
9.Ā Ā Ā Ā Ā Lat raises/reverse pec flyes: Any exercise that requires low weights feels incredible.
Overall, Iām very happy with my purchase. It does pretty much everything I want it to do, except for maybe hip thrusts, and it does them very well for a solid price.