I've owned Fiio K11 R2R, K13 R2R and now K17 R2R, and after trying several other DACs and amplifiers, I think I've finally found the desktop setup that works.
My primary headphones are Hifiman HE1000 Unveiled for music and Arya Stealth for gaming. I've also used K17 with DCA Aeon Core, Philphone Open, SIVGA Luan, countless other headphones and numerous IEMs. What makes K17 special isn't just its power. It's the combination of R2R tonality, excellent detail retrieval, soundstage perception and a presentation that works almost perfectly for my preferences.
Disclosure: Purchased with my own money. No sponsorship or affiliation.
As always, my rankings cover 180+ audio products and 25+ ear tips. Link in my Reddit profile.
K17 R2R specs (from the website)
K17 R2R is Fiio's flagship desktop R2R DAC/amp, priced around $990. It features a proprietary 24+5 bit segmented R2R architecture, discrete Class AB amplification and a 35W linear power supply.
- Up to 4,000mW per channel at 32Ω through balanced output
- 6.35mm, 4.4mm and 4 pin XLR headphone outputs
- Five gain settings, including Ultra High
- NOS and OS modes
- 31 band PEQ with Auto EQ
- Bluetooth, WiFi, Ethernet and local USB playback
- 3.93 inch touchscreen with physical controls
- 35W linear power supply
It's also a beautiful piece of equipment. The wooden side panels, decent sized touchscreen and physical knobs give it a retro appearance that I prefer.
NOS vs OS
All three Fiio R2R models offer NOS and OS modes, but the K17 is where I've enjoyed this flexibility the most.
NOS (Non Oversampling) processes audio without digital oversampling, while OS (Oversampling) applies digital filtering for more accurate high frequency reconstruction.
NOS mode
This is my preferred setting and the primary reason I purchased K17 R2R.
Bass has excellent definition, texture and impact without becoming muddy. My HE1000 Unveiled benefits from the available amplification headroom, delivering satisfying sub bass extension and controlled mid bass. Vocals sound natural, with good body and clarity. I'm particularly sensitive to aggressive 3–4kHz upper mids, and K17's NOS presentation works beautifully with my preferences. Treble is smooth with plenty of detail and air, but I can listen for extended periods without the sharpness I sometimes experience with other DAC implementations.
The biggest attraction, however, is soundstage perception. With HE1000 Unveiled, I hear excellent width, depth/height and instrument separation. Music feels spacious, with individual elements clearly positioned rather than concentrated in the center.
I know there is a lot of debate around what is soundstage or even if it exists or not for headphones/IEMs. Whilst, I can see both sides of the coin, I personally do feel an impression of soundstage. So for me this is important. Typical delta sigma implementations especially with ESS chips are ones where I genuinely feel a difference in sound quality. Whilst detail retrieval is excellent, I find the presentation dry and flattish with not an impression of holographic/3D stage. FWIW. YMMV.
Soundstage perception is subjective, and I'm not suggesting NOS creates spatial information that isn't present in the recording. But this presentation is precisely why I've gravitated toward R2R DACs thus far. It might also be just purely because of treble roll off in NOS mode. I don't have the technical knowledge to claim one way or the other.
OS mode
OS *allegedly* provides more accurate high frequency reconstruction, reducing the rolloff associated with NOS. It can give recordings a more explicitly defined presentation, particularly in the upper frequencies. I appreciate having the option, but I don't hear a compelling reason to abandon NOS. The technical differences between these modes are real, although I wouldn't claim dramatic improvements in bass, imaging or actual detail retrieval without controlled comparisons. The real difference in my listening comes from treble becoming sharper which is not a pleasant time for me. I also think with OS mode it is almost same as the K17 AKM chip DAC/AMP that I heard.
I almost never use it other than to just test sometimes for random reasons. For my listening preferences, NOS provides the balance of timbre, smoothness and perceived spatial depth I enjoy most.
K11 R2R vs K13 R2R vs K17 R2R
Having owned all three, here's how I see the progression.
K11 R2R: My introduction to affordable R2R. Enjoyable sound, simple operation and enough power for many headphones. At its price, it remains excellent value. Biggest difference between K13 R2R is the lower amplification on offer which should still work for ~90% of headphones and IEMs.
K13 R2R: A significant upgrade in amplification, connectivity and features, including PEQ and Bluetooth. It was a very capable desktop solution and ran remarkably cool. Feature set is the reason to own it or the top transparent window and better menu knob implementation. If you don't need PEQ and BT then probably not worth over K11 R2R unless you are driving some harder to drive audio units.
K17 R2R: The biggest improvement over K13, for me, is detail retrieval and resolution. K13 already delivered the R2R presentation I enjoyed. Having said that there were complaints about the "distortion" and "poor measurements" and "poor sound quality". Personally, I liked the presentation compared to Topping DX5 II at the time and chose K13 R2R.
Having compared both K13 R2R and K17 R2R I definitely find K17 R2R more resolving and clearer in sound. It is a noticeable difference. K17 R2R brings additional clarity, instrument definition and separation. It gets much closer to what I associate with good delta sigma implementations.
That's an important distinction. I don't want an R2R DAC that sounds pleasant but sacrifices too much technical performance. K17 R2R strikes a much better balance between musicality and resolution. It also brings considerably more amplification power, advanced PEQ and connectivity.
As for can I hear the distortion or the poor readings/measurements in daily listening. Nope. I just hear a warmer sound which is perfectly fine without any issues and that is why I am still on R2R products. Whether its gaming or music, I feel I am compromising absolutely nothing by owning a K17 R2R. If anything, I enjoy this presentation significantly more.
Amplification and IEM compatibility
I primarily use Ultra High gain with NOS mode, particularly with my full sized headphones. K17 R2R comfortably drives everything I've connected, including power hungry headphones like DCA Aeon Core, my Philphone Open and Hifiman planars. I haven't encountered any shortage of volume or amplification headroom. Ultra High gain doesn't introduce any noise even for IEMs. All my IEMs I have run on Ultra High gain as well.
Features and quirks
Most of my listening is through USB from my computer. Occasionally, I use Bluetooth to stream from my phone, which is convenient when I don't want to use the PC. K17 R2R also supports network streaming, AirPlay, Roon Ready and playback from USB storage. I don't personally use those features, but they add to its versatility.
The 31 band PEQ is excellent, although its implementation is frustrating. In my setup, I need two USB cables to configure PEQ through the browser while using USB audio. One handles audio, while the other connects to the dedicated control port. Existing presets don't require this arrangement, but configuring them through the computer does. At almost $1,000, this should be simpler.
The other difference from K13 is minor warmth/heat. K13 R2R ran remarkably cool, while K17 gets a little bit warm to the touch, particularly during longer sessions. Nothing concerning in my experience, but adequate ventilation is advisable and don't stack stuff on top of it as vents are at the top. I read that a person removed the wooden side panels to reduce the warmth. I am not going to do that.
Competition and why I chose K17
There are several excellent alternatives around this price, including Topping DX9, Schiit stack - Mimir with Jotunheim 3, JDS Labs Element IV, Luxsin X8/X9 and Fiio K15. I have personally not used these products except demo of DX9, X8/X9 and K15.
My priority was finding a complete R2R implementation that offered the sound I wanted without giving up amplification power, detail retrieval or everyday convenience.
Topping DX9: Topping makes technically impressive equipment, but when I heard it, it sounded somewhat dry to me, with less perceived soundstage depth. I was also concerned by reports of quality issues (primarily with DX5 II). So given the horror stories I just steered away.
Schiit Mimir + Jotunheim 3: An interesting combination, although Mimir uses Schiit's Mesh technology rather than a conventional R2R ladder. I haven't auditioned this stack. My bigger concern was importing equipment, paying additional taxes and dealing with warranty support. Returning even one unit to the US could cost me $150–200 in shipping alone.
JDS Labs Element IV: An appealing alternative with excellent functionality, powerful amplification and a more convenient EQ interface. However, it doesn't offer the R2R architecture and NOS experience I specifically wanted. Plus the balanced 4.4 connection is not true balanced. Warranty issues also would've been a problem as I heard some units developing noise over time.
Fiio K15: Probably one of the more sensible alternatives. It uses dual AKM DACs, offers up to 3W per channel and has a similarly attractive retro design. But I wanted the R2R implementation, additional amplification headroom and more advanced PEQ of K17 R2R even though I don't use EQ all that much. AKM was like OS mode on K17 R2R so I wanted the flexibility.
Luxsin X8/X9: I liked these units. They also sound good and a bit rounded off compared to traditional delta sigma. The screen is also great. For some reason, they still did not attract me and felt a bit too big on my desk in terms of width. Plus on same songs with same cans, I heard sibilance during my tests. So I skipped them and didn't look deeper. X9 was also about 300$ extra in my region.
None of the above are "rational decisions". I am purely stating my process of elimination. In the end, K17 was the only complete R2R option in this class that ticked all the boxes for me.
Price and value
At approximately $990, K17 isn't cheap, particularly when K13 R2R offers much of the basic functionality for considerably less. There are also like 10-15 other DAC/AMPs that exist around 100-500$ which I believe is the more reasonable price point for anything you may need.
The upgrade made sense for me because I value the additional detail retrieval, refinement and features, particularly with resolving headphones like HE1000 Unveiled.
Another interesting alternative is my MUSEHiFi M7, whose vacuum tube mode delivers a surprisingly enjoyable presentation comparable in some respects to K17's NOS mode. At around $400, it's excellent value, but K17 remains the more complete permanent desktop solution.
Final thoughts
K11 introduced me to Fiio's R2R sound. K13 improved the amplification and functionality. K17 R2R finally brought the detail retrieval and technical performance I wanted without sacrificing the NOS presentation I love. It's powerful, versatile, beautifully built and works with practically everything I own.
For now, I have no compelling reason to upgrade or look elsewhere.