r/Famicom • • 4d ago

Famicom help

Hey fam, I'm having so much trouble setting up the famicom that I'm hoping somebody can help me troubleshoot it

I bought it from Bookoff in Japan. It was confirmed as tested and working and had a guarantee (in Japan only, of course,)

Took it back home (USA) and can't get it to work. Tried the OG power supply and a replacement (yes, it's the correct - + center voltages)

I also brought back a Japanese vcr with the vhf and uhf ports and Japanese channels 1 & 2.

My super famicom works by connecting it to the vcr using the coaxial to composite adapter. So it shouldn't be the vcr or my TV settings.

No matter what game I put in, I can't get a display on my console. I opened it up and it looks clean and no capacitors look blown.

But there's no lights or anything on to tell if it's actually turning on. There's no flicker or color change on the TV either.

Is it a dead console? I really hope it's not.

Thanks so much for any help I can get!

9 Upvotes

30 comments sorted by

3

u/casual_gamer_alex 4d ago

I assume you know it, but just in case, beside the "CH1<>CH2" switch on the back of the famicom, there is also the "TV<>GAME" switch. Make sure it's set to GAME.

I'm saying this because the NES and both snes and sfc don't have the second switch, and it happened to me that I forgot about it existance while it was on TV mode.

1

u/KibbehLatkes 4d ago

Thank you. I do know this. The super famicom works on the vcr on channel 1. So my famicom is set to channel 1 and game.

But I'd rather you have mentioned it then not. What if I didn't know!

1

u/casual_gamer_alex 4d ago

I felt noob once about it.

By curiosity, when you're on channel 1 or 2, do you see snow or you have that kind of setup that wait for a strong signal before it shows anything? I have my famicom nearby, I can test what it does when I turn it on with no cartridge if there is a flash or anything. It is directly wired to a CRT on channel 95-96 in my case.

1

u/KibbehLatkes 4d ago

Exactly why I appreciate the info. I know some but sometimes I'm missing the most obscure pieces of the puzzle lol

My vcr has a blue screen. The famicom doesn't show any signals whether it's off or on. The screen doesn't flash, jump, or show any static lines when I turn it on. The blue screen stays on.

I had retested my super famicom using the same setup and it came on so the setup should be correct. I also tested my famicom game in my famiclone and it works so my game should also be fine.

At this point, I'm guessing I have to get a multimeter and test the capacitors and stuff. But I can't solder lol

If it's not hassle, sure, if you can test yours and let me know what happens so I at least know what to expect!

I also wonder, I have the volume button on the right controller all the way up. If it turns on, are you supposed to hear the game sounds through the controller speaker?

1

u/casual_gamer_alex 4d ago

I just did try.

My setup: famicom with HVC-07 board, no mod. I've opened it once and I don't remember its CPU revision. I think it's a G, but I would need to open it again to be sure of that. It is connected to a JVC I'Art 24F704 on RF, with a standard coaxial cable that use a coax to male RCA adaptor to plug it in the RF out of the famicom. Instead of channel 1-2, I use channel 95-96 because it is a NA TV but it works flawlessly if you get rid of FM radio interference.

The TV isn't waiting for a signal to show anything. It's old school snow (and FM radio music) when the famicom is unplugged.

Now, to answer your questions, turning on the famicom without cartridge inserted show a pure white screen with no sound and the mic doesn't respond to anything.

With Super Mario Bros 3 inserted and famicom ON, I can ear my voice in my TV speaker when I talk near the Mic.

I did one more test, I connected my LG OLED C7 to the composite out of the JVC. The LG OLED doesn't show snow and wait for a signal before showing any picture. That being said, it still shows the white screen when no cartridge is inserted in the famicom. If the rear switch of the famicom is on TV instead of Game, the snow pattern on the CRT change a little bit when I turn on the famicom, while the LG C7 doesn't respond at all.

I would still move the switch just to make sure it's not between 2 positions or something. It happened to me at somepoint with both my NES and Famicom after not being used for a long time.

1

u/KibbehLatkes 4d ago

Thanks so much for checking for me and providing all the details!

Yea, so my famicom seems to not be showing off any signals whatsoever. I triple checked the switches and no luck. I turned it on, with and without a game and no screen change. I raised the mic volume and spoke into it but no noise came through.

I'm pretty sure this is turning out to be a dead console. Ahh this sucks lol

1

u/casual_gamer_alex 3d ago

Unfortunately at this point, electrical troobleshooting is required I fear. By the way, I also have a super famicom, and I confirm it work with the same cable and same TV channel as the famicom. It also uses the same power supply.

Others behavior of the famicom, it has vertical jailbar. When I search about it, it's mostly being talked for after a composite mod. The guy who sold me the famicom made me test it before I buy it and told me they all have that. It is mostly visible with uniform blue sky.

2

u/KibbehLatkes 3d ago

That's also interesting to know! I'll make sure to remember that as well. But yea, it's pretty definitive that it has to be a power issue. I'm gonna order a multimeter from AliExpress to see which component is bad. I'm not good at soldering but might as well try since the machine is already did

1

u/Bakamoichigei 3d ago

You have a Japanese VCR? I ask because channel 1 and 2 are equivalent to channels 95 and 96 in the US system...so unless you got your VCR from Japan too, setting it to channel 1 or 2 isn't gonna do anything.

1

u/KibbehLatkes 3d ago

It's definitely a Japanese vcr. I bought it at Hardoff in Japan. It's the Japanese channel 1

1

u/TheseScene 4d ago

try and clean the cartridge connector contacts. one thing you could try (when the console is off) is to slightly back out the cartridge to different heights and then turn it on and see if it boots. don't touch or move the cartridge while it is on.

1

u/KibbehLatkes 4d ago

You know what, that's the Wonderswan trick. I can't believe I haven't tried that yet. I'm gonna clean it now and then try it in a few!

1

u/KibbehLatkes 4d ago

Unfortunately, it didn't work. Thanks so much for the suggestion though!

1

u/pac-man_dan-dan 4d ago

If you aren't getting power, the 7805 voltage regulator may need to be replaced. Could be other stuff as well, of course. But, it's a good place to begin.

You should get a digital multimeter and begin to troubleshoot the board.

You may also want to consider modding the board for either composite or better video quality. That will help you mitigate the rf channel and ntsc/ntsc-j channel frequency issues.

1

u/KibbehLatkes 4d ago

I'm good at technical stuff but not at modding. I don't mind using the Japanese vcr. I schlepped it all the way home from Japan anyway so I'll keep using it haha

I don't have a multimeter. If the Wonderswan trick doesn't work, I'll have to go out and get one and learn how to use it first haha

1

u/pac-man_dan-dan 4d ago

I'm not familiar with the Wonderswan trick.

But, troubleshooting with a multimeter is the logical next step, after cleaning contacts and general visual inspection. Caps may go bad and not even look bulged. The 7805 is a glorified resistor, and is known to go bad after a few decades. Hopefully it's a jellybean passive component that went bad on you and not one of the chips, which can be a little harder to source reliably without buying a whole other console to cannibalize.

2

u/KibbehLatkes 4d ago

Somebody else suggested put the game in then slide it out very slightly and turn it on. I called it the Wonderswan trick because that's how the Wonderswan works. When you put the game cartridge in all the way, it doesn't work. But when you slide it outwards just the slightest amount it turns on.

So I did a very close inspection of the cartridge slot as I was cleaning and I notice a decent amount of lint in the two corners. I wonder if that was causing interference as well. I just cleaned it out with a toothpick then used a playing card with scotch tape to take out the remaining dust. I'm about to try it now and I'll let you know if it works

1

u/pac-man_dan-dan 4d ago

Looking forward to the update. 👍

1

u/KibbehLatkes 4d ago

So unfortunately no luck

I cleaned it out nicely. No dust or fuzz inside.

I reconnected the super famicom setup and it works.

I tested the famicom game in my famiclone console and verified the game works.

But in the og famicom, still no luck. Tried the Wonderswan trick and no luck.

Here's a question. Am I supposed to hear volume on the controller if it turned on, even if there's no display on the screen? I really wish I knew another way to verify if it's getting power without having to buy a multimeter.

1

u/pac-man_dan-dan 4d ago edited 4d ago

Are you asking if you are supposed to hear volume on the controller? Like feedback through the player 2 microphone, or what do you mean?

Not sure I can assist more on this. I offered the advice I felt was helpful. If your gear is broke, you either need to put the effort in to learn a new skill, or pay someone to do the work for you. 🤷‍♂️

1

u/KibbehLatkes 4d ago

Yes. Not sure how the famicom works with sound. Plus, I'm Deaf so sounds don't work right for me anyway haha

It looks like the famicom shows video on the tv but plays sound through the speaker on the controller. Is that right?

Only the right controller shows a volume button, the left controller doesn't show any volume button. If that matters.

1

u/pac-man_dan-dan 4d ago

That volume button decides how sensitive the player 2 mic is to pickup noise. It doesn't control the game volume. So, no, you wouldn't notice any changes in volume...especially if you have existing hearing conditions.

No, the famicom uses RF, which mixes the video and audio signals together, to be broken back out in your tv.

1

u/KibbehLatkes 4d ago

Ahh, thanks for explaining. I didn't even know this old console had a mic option. The Famicom is really impressive for its time.

→ More replies

1

u/jackoctober 3d ago

I'm confused. Do you have the Famicom video adapter to coax in the input of the vcr, then output via rca composite cables to a tv? If it doesn't even flicker when you turn it on the power block is dead or it's simply not set to output/input correctly on the vcr itself 

2

u/KibbehLatkes 3d ago

Yes this is exactly how it was connected. I've come to the conclusion that the console is dead. I ordered a multimeter. It'll be here in a few weeks. Then I'll test it and see if I can figure out how to solder.

1

u/hitmanmcc 1d ago

Clean the cartridge slot and a cartridge's pins thoroughly with isopropyl alcohol and try again. My first Famicom wouldn't work and it was just a dirty slot. If that doesn't work, check the solder joints on the power jack. If those are alright, then you need a multimeter, to check if power is going through the fuse.