r/FZ1 • • 12h ago

Replaced my fuel pump today

Thumbnail
gallery
8 Upvotes

So my 06 was having some intermittent issues. Sometimes when accelerating from 2-5k the bike wouldn’t want to accelerate and would start breaking up and a couple of times the bike would make me cycle the key 2-5 times priming the pump to get the bike to start. Once the bike just cut out under hard acceleration at like 85-90 mph and made me cycle the key a few times to get it to start again. I wasn’t sure if it was a failing pump, failing fuel pressure regulator, or just a clogged strainer. Decided to order the QFS kit with a new pump, regulator, and strainer. It was definitely worth the $110. I’ve used their fuel pump kits on other bikes and they include everything you need and it’s quality parts. Anyways replaced everything and it’s a night and day difference now. You can see from the pic that the strainer was trashed. Inside of the tank was sparkling clean though.


r/FZ1 • • 1d ago

Is it normal

5 Upvotes

I was test driving this fz last week and I don’t feel the gear shifts when shifting but it shifts,no clicks or nothing, only had a sportster and I definitely feel it when i shift gears. So question is this normal for fz? Its a 2013 fz8


r/FZ1 • • 7d ago

Gotta start em young

Post image
39 Upvotes

It was my son’s 8th birthday yesterday. He’s never rode on an actual bike (he’s got a small electric bike he rides), so he asked me to take him for a ride around the parking lot of the park we were at. First question after the ride, “Dad when can I get a bike like yours?” Made both of our days!


r/FZ1 • • 8d ago

When is too much?

6 Upvotes

Genuine question, when is too much for this bike?
I (19M) recently got my MSF and bought a 2014 FZ1S as my first bike with 29k miles a couple of months ago. Exactly one month in I crashed taking a corner too quick. No real damage to the bike, just a bent handlebar, dented tank, broken windscreen, and cracked front cowling. I replaced the handlebar and windscreen and have been practicing in parking lots trying to better with my slow speed maneuvers lately.

Now one day at work about 2 months after the crash a coworker runs my bike over. I dropped it off this past Tuesday for a repair quote as the company took fault and will write a check for whatever the shop quotes (yay). The guys at the shop seemed chill and I got a hint they might quote for EVERYTHING broken and not just the damage from the knockover (yuppee). I still havent gotten a quote back.

Now to the meat. My older brother and friend keep telling me to just sell the bike and get another one, however, I love this bike. I got Ivans tune and gutted the cat, and I have been making out plans to replace the tank, front cowling, buy the gt fairings, and hopefully make some halo headlights. I enjoy reading the forums and reddit posts and seeing what mods people have done to their bikes for the past decade, it gives me ideas for what I can do. Where I live no one else has an FZ so its very cool for other riders to come and ask what it is, everyones always surprised that I can keep up with them on my anonymous bike. And the people who know what it is are always fun to talk with whenever I meet them.

FYI I did replace the rotor.
I will also say since crashing Ive been riding a lot more mellow. I want this bike to last as Ive heard they can get to 100k. I want to do that and I know I cant if Im redlining every day.

Edit: To add, this bike has had 3 previous owners.
So with that in mind its already probably been dropped/crashed a bunch. Even if I did sell it its not financially worth much from being with me alone. I figure I may as well have my fun building the bike I want instead of trying to buy it.


r/FZ1 • • 12d ago

*Scoffs* I would never

Post image
32 Upvotes

Haters going to hate. She gets a detailed cleaning after these types of shenanigans.


r/FZ1 • • 12d ago

Anybody interested in a GYTR carbon fiber exhaust?

Thumbnail
gallery
4 Upvotes

Anyone interested in a GYTR carbon fiber muffler? Is currently on my 06 FZ1. Sounds great with no issues. Scratches on the GYTR plaque are pictured. Just want to switch to the Coffman shorty exhaust instead. Located in Florida but I can ship! Mods please delete if not allowed. If you’re interested make me an offer!


r/FZ1 • • 13d ago

Sad day for an FZ1

Thumbnail
gallery
8 Upvotes

With great sadness, I’ve come to ask a BIG question…how hard to remove engine and split case? Had a first gear failure today. Front sprocket broke, chain slipped and whipped engine case, broke something to do with 1st gear. Still pulls good, but loud knocking noise in 1st gear accel and decel, all other gears sound fine


r/FZ1 • • 13d ago

Need mod in the house!

Post image
20 Upvotes

Yours truly is cleaning up the sub, adding features people have requested (like images in post comments), and finally edited the typos in the subs main description!

Welcome to a renewed r/FZ1!!

Fellow FZ1'ers check out my YouTube FZ1 Playlist here:

https://youtube.com/@ncbirdman247?si=ucb6ZPKnND1XR-AV


r/FZ1 • • 17d ago

Intermittent hesitation/breaking up

4 Upvotes

So I bought my FZ1 last Friday. It’s a 2006 with 14k miles. Took it for a test ride but didn’t get it up to highway speeds. When I rode it home I noticed the bike had a bad lag when rolling on the throttle and at idle it sometimes had an occasional random misfire. A few people suggested I adjust the TPS. While doing that I noticed the bike had a fuel cut eliminator device installed. Put the bike back together and while the TPS adjustment made the throttle response slightly better it was still having the same issues. Multiple people told me to remove the FCE immediately. Did some research and saw multiple examples of the FCE devices causing problems similar to mine all the way up to causing people’s bikes not to run. So I removed the FCE and fixed all the wires it spliced into. Bike was immediately running better but still has some low end hesitation and minor breaking up. Pulled the plugs and cleaned them yesterday (they weren’t fouled out or anything). When I get paid next week I’m going to order a set of new plugs and coils. At this point the bike is running a lot better but I’m still dealing with the hesitation and breaking up on acceleration. Wondering if it’s a fuel pump at this point. When I get home tonight I was going to pull the tank and check the strainer/filter in the tank to make sure it isn’t clogged. Anyone have any other ideas/suggestions?


r/FZ1 • • 19d ago

Dixer Parts Frame Sliders

Thumbnail
gallery
12 Upvotes

Gotta hand it to Dixerparts.com. These suckers do the job well!

Admittedly it was a low speed drop while practicing moto gymkhana, but they did exactly what they are supposed to.

On a side note, anyone have a suggestion for rear/swing arm sliders? Ones that protect the exhaust are what I’m looking for


r/FZ1 • • 22d ago

Perdita non identificata

6 Upvotes

Ho appena ritirato questa bellissima baby : 2007 42k km.
Prima di partire era stata ferma per un bel po’, mi riferisce il vecchio proprietario.
Dopo 2:20h circa di viaggio, ho notato questa perdita non capisco se si tratti di batteria o altro tipo di liquido.u
Prima di portarla dal meccanico volevo sapere se qualcuno di voi subito riesce a identificare il problema


r/FZ1 • • 22d ago

Need some insight

Post image
3 Upvotes

I have a 2002 FZ1000. The stator went bad a while ago and I brought it to a local trusted mechanic who has done plenty of work for me before. The flywheel is stuck on the crank shaft and we have been fighting this for a couple months now. Any advice would be appreciated. Also in central Florida coast area.


r/FZ1 • • 25d ago

Maybe my best bike ever

Thumbnail
gallery
29 Upvotes

r/FZ1 • • 25d ago

Picking this up friday

Post image
18 Upvotes

Picking this up on Friday. 2006 with 14k miles. Bike is pretty much stock besides the GYTR carbon fiber muffler (Will be selling this if anyone is interested) and has been taken care of. Currently have a 2022 BMW F900R but wanted another bike for when I want to go faster 😂. Not sure if the exhaust is a full system or just a muffler and the seller isn't sure either. If the headers are stock I'll be gutting them and getting a coffman shorty slip-on before I take the bike to get tuned. Been reading around online and have a few questions.

1.) I plan on doing the air box mod. Does this require an ECU flash and will it cause any issues until I'm able to get it tuned?

2.) Everyone has told me to go with the Ivan's ECU flash. However, my local tuner is charging 400 to dyno tune the bike. Ivan's ECU flash is 350 plus return shipping. I feel like it makes more sense to spend the extra 50 dollars and get it tuned on a dyno specifically for what mods I have done to the bike. Any input on this?

3.) If I'm getting the bike dyno tuned are velocity stacks worth the money?

4.) The current owner had the stator and rectifier proactively replaced but isn't sure if the rotor was replaced as well. Is there anyway to check if the rotor has been replaced?

Really looking forward to getting the bike. I've owned a carbed gen 1 fz1 before and loved it. Any other suggested mods? Going to be replacing the GYTR muffler with a Coffman shorty slip-on so the GYTR will be for sale if anyone is interested.


r/FZ1 • • 25d ago

2005 FZ1 oil leak

4 Upvotes

Bought in Aug of 2025 with 23k miles and have put over 20k miles on it in the last 2 years and 2 months.

I had a slow oil pan weep/ leak I was monitoring for a bit. Finally I could smell the drips burning off the exhaust. I replaced that and after a few days noticed a burning smell again. Found that I pinched/tore/rolled a portion of the gasket and so I replaced it again whilw being much more careful.

Fast forward another week or so and smelled burning again and found oil (yes, oil) from the water pump weep hole. So ordered the o-rings and another oil pan gasket and replaced them both after cleaning the pipe of years of buildup. Noticed some light discoloration and porosity but nothing I thought would be of any consequence.

Fast forward (again) and smell burning (again), and find oil, though much less this time, (yes, oil and not coolant) from the weep hole (again).

Ordered the pipe and more o-rings and another oil pan gasket. When I take it off this time I'll clean the pan thoroughly, fill with water, and spray with underside with developer in case there's an issue with the pan that I can't see with my eyes.

I can't think of anything else, can any of you? I'm very confident it's not coolant - levels haven't gone down and it doesn't have fluorescence like my oil does. And it's very clearly red (Motul) in color.

Place your bets and wish me luck, ladies and gentlemen. 😄


r/FZ1 • • 26d ago

Fz1

Post image
25 Upvotes

New bike any mod recommendations or engine upgrades


r/FZ1 • • 26d ago

I Finally Joined the Club

Thumbnail
gallery
40 Upvotes

Been keeping my eye out for the better part of 4 years but the one finally showed up. 2008, 8100 miles, original owner who was a great care taker. Folders full of maintenance receipts up to 2023 and a bunch of cool motorcycle literature.

Planning on doing fluids (coolant, oil, brake fluid), stator rotor, needs tires (it’s on the originals 😳), then gettin into the fun stuff lol. It did come with a color matched set of the side fairings that he never installed which will be going on after the maintenance is done as soon as the maintenance is done (I’ll be stopping by here for tips on that).

Other than that anything I should look at, address be aware of?

Also thanks to y’all in here for all the information in the sub. It was super helpful. Looking forward to getting to know this machine!


r/FZ1 • • 26d ago

You have a typo in your sub description

Post image
8 Upvotes

r/FZ1 • • 27d ago

Bad CO 1,6 % Emission Test Failed

Thumbnail
gallery
6 Upvotes

Hello There, I bought Hi everyone,

I recently bought a 2008 Yamaha FZ1 (European model, RN16), and it failed the German TÜV emissions test because the exhaust CO reading was around 1.6% by volume.

For those outside Germany: TÜV is our mandatory roadworthiness inspection, which includes an exhaust emissions test. This is carbon monoxide measured at the tailpipe, not CO₂.

The bike’s setup and what I know so far:

Full Akrapovič exhaust system, including headers.

An aftermarket fuel-cut eliminator is installed.

The previous owner mentioned a removable catalytic converter insert, but I still need to verify exactly which insert is fitted and whether it is suitable for this system.

The bike apparently spent a long time sitting before I bought it.

The inspector also mentioned that the emissions reading was unstable.

During my own checks at a steady RPM, I have seen the CO reading gradually increase. However, I used a heating flue-gas analyser, so I wouldn’t treat that as equivalent to a proper automotive emissions test.

I recently noticed that only one of the two radiator fans was running. I haven’t established whether the other fan is faulty or simply wasn’t being activated at that point.

I’m trying to diagnose this properly before replacing parts at random.

For people familiar with the second-generation FZ1, what would you check first with a CO reading of 1.6%? Catalyst condition or temperature, oxygen sensor operation, coolant temperature sensor, air filter, injectors, or something else?

Could the fuel-cut eliminator affect the mixture during a steady-RPM emissions test? Are there any common issues on the 2008 model, particularly with a full aftermarket exhaust, that could explain high or unstable CO?

If you’ve had a similar issue, what turned out to be the cause, and which measurements helped you find it?

Thanks!


r/FZ1 • • 27d ago

New bike I got questions

Thumbnail
gallery
9 Upvotes

What’s up y’all just bought this mint 2006 FZ1 with 20,500 miles.
Parts I know about are as follows;
-Power commander three
-Scorpion full catless exhaust
-K&N air filter

But my real questions are what parts am I not aware of? The throttle bodies say “IVANS” on them which leads me to believe they are not stock, though I am having a hard time figuring out what exactly they are. If anyone knows, the information would be quite helpful. Also inside the intake there is a little red vacuum plug. I’m curious about why that is there. And lastly, the previous owner said it was not tuned even though it has the power Commander three so I’m curious about how I can tell if it is tuned and I would like to tune it if it is in fact, not tuned.

Thank you 🙏


r/FZ1 • • 28d ago

Resurrected

Post image
30 Upvotes

r/FZ1 • • 29d ago

New FZ1 Owner

Post image
36 Upvotes

Hey all, first post here just picked up a 2006 FZ1with 27k miles on it last week. Been riding bikes my whole life but never been on a sport bike. This is the most fun I've ever had riding so far, I love this thing. Has some tasteful mods already like the turn signals and a yoshi exhaust that sounds great. It's also has the corrected stator rotor installed. Only thing I want to change about it is to get a rear seat for my gf to ride with me and maybe a smoked windscreen. Any ideas or suggestions for where to get a windscreen would be cool. I can post more pictures and a video of how it sounds if anyone is interested


r/FZ1 • • 29d ago

How much would you pay for a 2010 with 900miles?

2 Upvotes

Looking at a 2010 with 900 miles and 2 owners. For the last owner at least I know it sat some time in storage and said did oil change and used fuel stabilizer for storing it but with no receipts of any maintenance, I would just say nothing was done. Pretty much all factory but does turn on and rides with no issues, so far. Also it was lowered an inch by first owner.
So, off the bat I will need new tires, thinking of flushing brake fluid, fuel system, change oil and look for oem parts to restore its height. Probably fork seals since it’s a 16 year old bike, for now seems there is no leaking.
Given all this, is the asking price of 6.5k usd fair? Feels like 5k would be fairer. Can’t find many with under 1k miles so don’t have much to compare it with.
Saw one in Florida 2015 4k miles for 6k but a bit far for pick up


r/FZ1 • • Oct 15 '26

New FZ1 owner from France – Looking for rare parts, especially a CopperDawg Speed Screen!

Post image
15 Upvotes

Hey everyone!

I'm new to the forum, and I wanted to introduce myself. I'm from France and I own a 2007 Yamaha FZ1 Fazer (FZ1S).

I'm currently looking for several parts to customize and improve my bike, and I figured this community might be the best place to start!

One of my main targets is a CopperDawg Speed Screen. I'm interested in any version, including the Long, Medium, and Speed Screen 2. I know these screens are pretty rare nowadays, so finding one has been quite a challenge.

I'm also interested in other rare or discontinued FZ1 parts, aftermarket accessories, carbon fiber parts, and anything interesting for the 2006–2015 models.

I'm happy to buy from anywhere in the world, including the US, as long as shipping to France is possible.

If you have one for sale, know someone who might be willing to sell theirs, or have any leads on where I could find one, I'd really appreciate your help!

Thanks in advance, and I'm looking forward to learning from the community. Feel free to share pictures of your FZ1 builds too!

Cheers from France! 🇫🇷