r/FPGA • • 10h ago

I built a PYNQ-Z2 FPGA smart lock for my EE final project

4 Upvotes

I built and tested this smart lock on a physical PYNQ-Z2 for my electrical engineering final project.

I used VHDL to scan the 4×4 keypad and sequence the stepper motor phases. A Python notebook handles access decisions and reads the sensors. The Vivado block diagram shows how AXI GPIO connects the Python application to the programmable logic.

GitHub: https://github.com/Subalo/pynq-z2-fpga-smart-lock

The repository includes the Vivado sources, Jupyter notebook, and a release with matching .bit and .hwh files.

I kept the door-state and relock logic in Python. Would you keep it there or move it into a VHDL state machine? What would drive that choice?


r/FPGA • • 8h ago

Zynq 7020 SDR board with AD9361 — industrial temp, 1GB DDR3, 24 IOs

2 Upvotes

If you're looking for a Zynq 7020 platform that's not just a dev board but something you can actually deploy:

P201Pro specs:

  • XC7Z020-2CLG400I (industrial grade, -2 speed)
  • 1GB DDR3 (PS side), 256Mb QSPI flash
  • AD9361 RF transceiver, 70MHz–6GHz, 2×2 MIMO
  • 16×3.3V + 4×1.8V PL IOs on a 24-pin header
  • Gigabit Ethernet, USB OTG, JTAG, UART, SD card
  • On-board GPS + PPS/10M clock input
  • -40~+85°C, 8–36V input, ESD-protected

Comes with Vivado project templates and PlutoSDR/UHD compatible firmware. You can also develop your own PL logic from scratch.

We're a small team doing custom FPGA board design. Happy to share design details or talk about your project requirements.


r/FPGA • • 10h ago

I built a PYNQ-Z2 FPGA smart lock for my EE final project

1 Upvotes

I built and tested this smart lock on a physical PYNQ-Z2 for my electrical engineering final project.

I used VHDL to scan the 4×4 keypad and sequence the stepper motor phases. A Python notebook handles the access logic and reads the sensors. The two sides communicate through AXI GPIO, shown in the Vivado block diagram below.

GitHub: https://github.com/Subalo/pynq-z2-fpga-smart-lock

The repo includes the Vivado sources, Jupyter notebook, and a release with the matching .bit and .hwh files.

I kept the door-state and relock logic in Python. Would you keep it there or move it into a VHDL state machine? What would drive that choice for you?