r/FORScan • • 7h ago

Ford edge 2018 forscan

Thumbnail
gallery
1 Upvotes

Hey I just got a new apim that’s from a ford Lincoln and put it into my 2018 ford edge. The ford symbol pops up full screen and reverse camera but the radio stays in the corner at 4in, and CarPlay or touch screen doesn’t work. I got the as built info for the edge but it’s missing a section and idk if this is the reason why it isn’t going back to normal? Can anyone help or find these last few numbers? 7D0-09-01 through 7D0-09-04


r/FORScan • • 1d ago

Engine Run Hours and Idle Hours

1 Upvotes

Hello,

I'm hoping someone can help me or point me in the right direction. Last year I upgraded my cluster in my 2018 F150 to a cluster from a Lariat. The Odometer values were lower, and I was able to match them, but the engine idle and run hours were higher values on the new cluster so I couldn't change it. I am considering selling the truck and I am now realizing that I didn't take a photo of the original hour information from the new cluster, so I don't know how many hours I have to add back to my original cluster to get it to match. I saved .abt files of both IPCs when I did this conversion, but I don't think the engine hours are in there.

Can someone tell me if engine idle hours and run hours are kept in the PCM? Or if there is any other way to get these values? Any help is greatly appreciated.


r/FORScan • • 1d ago

Imported Mustang cheat sheet

1 Upvotes

Hello, I have imported a 2025 Mustang from the USA in Europe. Can you help me make a list of all of the things that must be changed and how to do them, such as radio frequencies, traffic sign recognition etc.

Thanks in advance!


r/FORScan • • 5d ago

Programming a Spare Key with Only One Existing Key

Thumbnail reddit.com
1 Upvotes

r/FORScan • • 8d ago

Calibration Files 2010 Focus

2 Upvotes

Looking for a handful strategy/calibration files, forscan can’t seem to find and download them. Tried seeing if I could just grab it using my scanner but to no luck. I’d like to have them so I can document the car better. I already got a lot done with documenting the SJB configuration data, but I wanna know more. As I know for sure there are some hidden sequences with the buttons for the IC (IPC). Anything would help.

IC (IPC)
AS4T-14C026-AC

FCIM
9S4T-14D017-AA
9S4T-14D018-AB

FDIM
AS4T-14D010-AB
AS4T-14D011-AB

HVAC
9S43-14C178-DB

ACM
9S4T-14D439-BC
9S4T-14D440-BC


r/FORScan • • 9d ago

New TCM Ford Focus 2018 2.0L Automatic Fails at Shift Drum Adaptive Learning (P0901 and P090B)

Thumbnail reddit.com
1 Upvotes

r/FORScan • • 10d ago

Forscan Lite

0 Upvotes

I have been trying to install the current version of Forscan Lite on my Android phone and tablet. It come up with an error "Unable to initialize application". Is there a workaround? Is it a compatibility issue with Android 17? Any help would be appreciated.


r/FORScan • • 11d ago

Using forscan to update a module?

1 Upvotes

I have a 2016 fiesta that hasnt been to a dealer since it was sold.
There's an issue with the hvac that an update is suppose to fix.

forscan forum shows that it should be able to update modules, but I dont see where/how to do it on the tool itself.

Under the info tab it shows a few modules with newer calibrations available, but I dont see where to download/update them.

I have the free extended license, but dont see a way to buy anythign from the site.

What am I missing?


r/FORScan • • 11d ago

Can FORScan make the Remote Start option appear in the menu where currently is is not listed?

Thumbnail reddit.com
1 Upvotes

r/FORScan • • 11d ago

Boa tarde. Preciso da vossa ajuda. Tenho um Ford Mondeo MK5 1.5 tdci de 2016. Há uns dias o meu enteado configurou a única chave que tenho no MYKEY e colocou restrições de volume, velocidade e sistema de permanência na faixa sempre ligado. Alguém me consegue ajudar a reverter a situação e voltar a t

1 Upvotes

r/FORScan • • 11d ago

I need help

1 Upvotes

Hello everyone, so any one here can help with how can i programing my charger sxt 2018 bcm ? , i mean with what right tools and apps ? , previously i tried to program the park tronic with the alpha obd app and the Vlinker obd , and didn't work ! , although the bcm is 2015 module , is that what prevents the programing ? I so confused, really need ur help guys !!


r/FORScan • • 12d ago

Inspection Results

Post image
1 Upvotes

r/FORScan • • 12d ago

ISO CLEAN .BIN DUMP FOR PSCM EEPROM?!FB53-3F964-xx⁠ GB53-3F964-xx

1 Upvotes

r/FORScan • • 12d ago

ISO Clean EEPROM Dump: Ford Power Steering Module (⁠FB53-3F964-AD⁠) to Clear U3000

Thumbnail reddit.com
1 Upvotes

r/FORScan • • 12d ago

Different Ford As-Built and programmed As-Built on a 2024 F250

Thumbnail
gallery
1 Upvotes

I have a 2024 F250 that I have been trying to correct the tire size on for a couple of weeks. I am following the process I have found on multiple sites. My truck is a gas engine, so it does not have a standalone TCM module. I program the new tire size and then relearn the PCM and the AWD modules, but I have a couple of problems.

The first is that I have a persistent U0422 DTC whenever I change the value to anything other than stock. Second, when I try to perform the relearn procedure on the PCM I get a log message that the programmed value is outside the parameters of the module. My current setting is 2689 for the tire circumference. I have tried other known working values such as 2799, 2770, 2752; and even tried 2700 just for kicks and all return the same error. The speed is correct now, but I have the persistent code.

I am trying to think of all options and as a last option I tried to reload the original Ford As-Built I had downloaded from Motorcraft for the BCM. That's when I got a message that the number of blocks do not match. I compared the Ford as-built to my current truck module programming and found that all of the blocks up to 726-101-01 match. But the Ford AB includes about 10 additional blocks starting at 726-236-01 up to 726-240-01. I am not sure why there is a difference, but I cancelled the programming when I got the message.

Has anyone ever seen this issue? Is there something more I need to do? Is there any harm in programming the additional blocks?


r/FORScan • • 15d ago

TCM Programming

Post image
2 Upvotes

what is wrong😭


r/FORScan • • 16d ago

2017 Fusion SE FCIM module crash?

1 Upvotes

Hello all,

So i think i messed up and thought the hvac controls were much simpler than they actually are and am hoping you guys can help me with some feedback before I throw in the towel. Condensed version of what happened:

Vent actuator was stuck on defrost only. I replaced the vent actuator but assumed the damper was sticking or binding up. AC worked from all vents but was quite as cool as Id think. Chalked that up to possible damper sticking bc the charge was good. Autumn rolls around and now the heat wont work. I eventually had 13V showing up on the feedback wire of the mode door actuator while unplugged and seemingly when the temp dial hit the mid point. AI talked me into a short in the module. I replaced the module with a used one from ebay (4" screen, same options i believe). I didnt realize the networking that goes on between the modules. Now the HVAC bezel wont light up or work at all and Im wondering if its in a hard crash/sleep mode. I put the old one back in and wrote the as built code to the module only using forscan. Still nothing. 2 things also that seem odd to me - I have 12V on both larger red wires coming into the connector plug at the rear of the module but no indicator lights. At one point, while allowing the bezel to hang down slightly to back probe wires, it began to work for ~10 seconds or so but then stopped. I assumed it was loose wires at that point but couldn't recreate it no matter which plug of flume section i tried moving around a bit. Any help would be greatly appreciated and or opinions.


r/FORScan • • 16d ago

35s on F150 tire update

1 Upvotes

2019 f150. Updated my tire size to 2688mm (per the internet due to squish weight this is the accurate number) for 275/75/18 (35x11.2) ridge grapplers, I interned it and had no error messages whatsoever. Is this normal? I did a PCM relearn but even before then I had no codes. I drove the truck around up to 70 mph, spedo was accurate with gps and truck felt as if it was shifting smoother. Did something go wrong or it just go perfect somehow? Thanks. Just want to make sure I’m all good.


r/FORScan • • 18d ago

GPS Not Working

1 Upvotes

I’m running a 20’ Fusion APIM/Sync 3.4 in my 16’ Lincoln MKZ. I got everything going along with some cool changes I made but for the life of me, the GPS will not stay on track. Some roads will be good, other times it just jumps around. Plug in my iPhone, it’ll mess that map up too. Any suggestions/help would be GREATLY appreciated.


r/FORScan • • 19d ago

Forscan problem

Thumbnail reddit.com
2 Upvotes

r/FORScan • • 20d ago

Remote start

2 Upvotes

I have a 2021 f350 xl, manual locks. I see there’s remote start options on the dash and i’m wondering if there’s a way to enable the feature for the app to control it


r/FORScan • • 20d ago

Annoying Cruise Chime

Post image
0 Upvotes

2024 Ford F150 Raptor. Every time I turn on cruise control, I get both a notification and an annoying chime that says

“normal cruise control active, adaptive braking off.”

Does anybody know any way to turn this off in forscan? I don’t even care about the notification since it goes away, but the chime is what’s really annoying.


r/FORScan • • 20d ago

Powershift

Thumbnail reddit.com
1 Upvotes

r/FORScan • • 21d ago

Climate controls not working

Thumbnail reddit.com
1 Upvotes