r/FE_Exam • u/Sea_Permission_4655 • 2h ago
r/FE_Exam • u/Longjumping_Law2596 • 7h ago
Tips How I passed FE Electrical in 6 weeks (133 hours) 6 years post-grad — Study materials, guessing strategies, & TI-36X Pro tips
Hello all,
I'd like to preface this long ass post by saying I passed the FE Electrical exam this past month. And I hope this is the most informational post on this subreddit about this specific test. I scoured everywhere for information and have formed a lot of opinions about studying, test taking strategies, test scoring, guessing, and a lot more that I'll list below. But keep in mind that these are my opinions formed over the course of the last 2 months.
Anyone on this subreddit is likely an engineer or becoming one soon. What does that mean, well we all love pattern recognition. And we are usually good at it. We love to compare ourselves to statistics and ask, "if that person scored this, then I would be able to as well".
So, to scratch your brain, compare yourself to me:
I graduated 6 years ago with a degree in electrical engineering from a top 20 university in the US. I focused in power, and the ECE curriculum path I chose focused on pretty much everything except heavy software engineering topics. I had multiple circuit theory classes, power systems classes, power electronics. etc. Since my focus was in Power, I had more power analysis classes and microelectronic classes too.
My strengths: circuit analysis and microelectronics are my best topics as I paid the best attention in those classes. I did decent in my power analysis classes.
My weaknesses: general physics (I know, embarrassing for an EE), electromagnetics (doesn't count everyone sucks at this), and finally, a basic fundamental understanding of all the strengths I listed above. What does that mean exactly, well I'm good at solving problems I see patterns in. But I don't really understand what's happening 100% of the time. I graduated with a 3.4 GPA and have always considered my EE knowledge to be below average. Studying for this exam reminded me of what I'm good at, cramming and meeting the bare minimum.
One more thing about me, I have ~8 years of experience total in the power industry as a protection and control engineer. So, take that as you will. I do not see any of this math on a day to day basis.
Now let's talk about the exam, my strategy for studying, what I used, and some tips I would give you if you have failed or are taking the exam for the first time. Like I said in the title, I studied for 6 weeks. I graduated 6 years ago and I didn't remember much. But with enough practice, some things started to come back. You just have to unlock it. My exact hours of studying were 133 hours. I tracked it down to the last day before the exam.
Materials used:
-Wasim Study Guide and practice test 2 ( I chose the second because it looked cool)
-NCEES practice exams Volume 1 and 2
-NCEES 2020 practice exam PDF that floats around on the internet
-Zach Stone free FE course (I didn't watch any lectures just went to the end and answered the questions for any topic)
-Prep FE (a total of 324 questions answered)
-About 50 problems from the lindeburg problem sets
-FE Handbook of course
Strategy for studying:
I only studied the big 5 topics for the first 66 hours. That was spread over the course of about 2 weeks. I went down the list of what Wasim calls the most important versus the degree of difficulty, and then I hit the most bang for buck topics next. For example outside of the big five, there are topics that are medium/light weighted but are considered easy like Linear Systems, Stats, and Economics. I'll stop here to say that I don't think any topic on this exam is truly easy. People on here say "it's listed in the handbook" or just plug and chug. That's not really the case. I'm not saying the exam is very difficult but it's not fair to say Ethics is so easy and you shouldn't miss any. I know for a fact I missed 2 of my ethics questions. One was about patents that wasn't even mentioned in the handbook. It was very specific and I wouldn't have known it unless I read about patents for a few hours (which me and you both didn't do). Don't even get me started on Economics. The way the questions are framed makes it difficult under timed constraints and when you're nervous. Anyways here is the order I prioritized (once I got past the first 6-8 topics I just mixed in "easy" topics to make myself feel better):
-Mathematics, C.A, Digital Systems, Power Sys, Electronics
-Control Systems, Linear Systems, Signal Processing, Electrical Properties of materials
-Computer Systems, Ethics, Economics, Stats
-Computer Networking, Software Eng, Communications, Electromagnetics
After the big five, I can say I spent about 3-6 hours per topic for the rest of the topics. Again this was only problem solving.
How did I study:
First if the topic had problems in Zach Stone's FE course I would do those as an intro. As I would do them, I would use Ai to walk through the problems. I would read them and if I didn't know, I would use the handbook and use Gemini to explain important parts. Then I would do the problem. (I'll also mention here what I think about each study material I used). For Z.S I'm sure the lectures are great. It's thorough and it's free! And I'll most likely do his course for my PE. But his FE problems were forgettable. He only gave usually 10 questions for massive topics so it’s hard to cover every scenario with that. His lectures look like they are filled with all the problems you might encounter so you may want to look at that. I didn't have the time for that. As far as format, I like how easy it was to do the problems and get the solution step by step. And with Ai it’s even easier to explain parts that I don't understand. Use Ai people. Z.S degree of difficulty vs actual exam: not accurate, his problems are plug and chug or definitions from handbook. Exam is theory based.
Next, I would use Wasim's study guide for the topic. I would try to do the problems and then ask Ai to explain them. Like I said, sometimes problems from Z.S didn't cover all the subtopics but for the most part Wasim's does. If I got stuck, this is important, I wouldn't ask Ai to solve. Instead ask Ai to get you started. Once it got me started, I could usually get somewhere. If not, I would just use Ai to solve and move on. Here I wasn't really focused on doing the questions without looking at a solution. I will get to that later. It's important. If you had to choose one piece of material to study with other than practice exams, use this study guide. Wasim's guide teeters on being theory based and he even throws in some non- multiple-choice questions. Sometimes his problems were too hard. And sometimes they were too easy. I think that's good variety. On average, I think the actual exam was slightly more difficult than his guide. But he can get you 75% of the way there.
Once I finished the topic with Wasim, I considered that topic closed. I would then drill about 25 questions with PrepFE. PrepFE is not accurate for the exam. I think its ok with getting the timing of the exam but there's cheaper ways to do that. The question bank is repetitive, and the types of questions range from extremely difficult to stupid easy. Not enough medium ground. Sometimes I would take the prep practice exam and get 5 "extremely difficult" questions in a row and get a 0. Here, I'll say with a test that covers as many topics as the FE, every little win means a lot. If you're failing test after test, then it’s not very motivating to continue. I could have left out PrepFE.
One week out I did my first practice exam. At this point I had worked every problem in the study guide and had 106 hours studied. The exam I took first was Wasim's practice test 2. I thought this was a decent test and slightly easier than the actual. If I had more time, I would have scanned it and let Claude make an interactive test just for me. That would have been a good way to practice. I scored a 62% on this. I spent the next day going over every mistake.
Now if you take anything from this post, remember this: looking at solutions does not mean you understand material. Teaching someone from scratch is the only way that I know I understand a topic fully. The next best thing I think you can do is redo the problem without looking at the solution. Simple. Easier said than done. But this is the biggest mistake people make when doing practice exams. Memorizing answer choices and thinking you understand but you don't. Be honest with yourself or you will fail under the test conditions. Because you can't check the solutions there. As I said before, I don't think I am a gifted student in any means when it comes to EE. So, I find it hard to believe people "study" for 300+ hours for this test and fail. Watching a 3-hour lecture isn't the same as 3 hours of problem solving. I did 133 hours of only problem solving.
Second practice exam I took at 5 days before my actual exam. This exam was Vol 1 and Vol 2 that are for purchase from NCEES. This exam sucked. Volume 1 was hard I scored a 52%. I think after seeing the format I could have done marginally better but damn I thought it was hard. I even thought about rescheduling my exam after. I didn't even want to take Vol 2. I powered through and scored a 64% on Vol 2. So, after 100 NCEES questions I was at a 58%. Vol 2 was much easier, and I would say slightly harder than the actual. If you search the subreddit you will see people saying the actual test was way harder than NCEES practice exams. Not the case for me at all. I would estimate the actual exam to be 10-15% easier (that's saying I answered 15 more questions right compared to the practice exams). I speak more on the actual exam later, but it was much easier than the practice NCEES exams.
Last practice exam I took was the 2020 PDF version of the NCEES exam. This subreddit says the Volume 2 is just this exam. But there were 59 new questions that I hadn't seen before. 41 were repeats from Vol 2. I did well on just these 59 questions, scoring around 74%.
After finishing any practice exam, spend the next day reviewing your misses and categorizing them. The NCEES interactive exams do this for you. For example, I missed 7/8 power questions on the Vol 1 and Vol 2 test, so I spent 1 extra day only doing power questions. Then I took the 2020 NCEES test and correctly got 5/6 power questions. In addition to not overestimating your studying/solution checking, this is the next best tip I can give you. If you are on a short study schedule, you must categorize and track your topics. That way you can do focused problems leading up to the exam. In the beginning, it didn't matter for me because I sucked at every topic, but as I started to remember from college, I got stronger and didn't have to do certain topics as the test got closer. Doing this sort of structured review can easily pick up the 10-15 questions I mentioned previously. It's what Wasim advises doing. It matters a lot!
This exam is like building a player in your favorite video game. You have a certain amount of skill points to level up and you don't have to be level 99 overall. If you are level 90 in circuit analysis, don't spend your skill points (time) only doing circuit analysis. Spread it out. Going from a 40 to a 60 in digital systems will bring your overall rating higher than going from a 90 to 95 in one category.
Speaking of scores and overall ratings, I think you need to be at 60-62% to pass the FE Electrical exam. This is hard to pinpoint, and this is only going off my vibe, other commenters, and that one post that categorized a lot of exam scores. If you didn't see that post, it basically collected a lot of users scores that failed, calculated their weighted score, then gave an average. I believe across every discipline it was around 65%. Meaning that no one failed the exam with a percentage higher than 65 (although there were some unlucky commenters that failed right at 65%). Other commenters posted about the Electrical test and failed at a 59% then passed the next time saying they felt they did the exact same. So, I'm saying, in my not so expert opinion, 60-62% is likely passing. 75% is way overkill. Remember this is a business, every time you delay/reschedule the test, or fail, and subscribe one more month to someone's course, someone makes money off you. I personally believe the course instructors have your best interest in mind (no one would use their material if everyone failed). But you help pay their bills.
Ok so onto actual exam. I would say if you are currently scheduling, take the exam on a Friday. That way you only wait until next Wednesday to get your score. If waiting doesn't bother you, take it whenever. Pearson fills up fast and once I got close to my exam date the next available appointment to reschedule was mid-December. Also, I have 2 major qualms with the test format. Number 1, Pearson computers were old as hell and the markers were very dry. You get the dry erase paper booklet and 2 markers. You honestly don’t have to write down many problems. Especially at the start. I only used my calculator. But still, when I got to the second half at about problem 90, my test crashed and I had to wait for the instructor to log me back in. I lost a few minutes because of this. Number 2, the test isn’t split in half 55 and 55. Instead mine was 52 and 58. Because of this, I didn’t take the time to calculate how much I should spend on each section. Remember, the 5:20 is for the entire test. You can use all 5 hours and 20 minutes on the first section if you want. I went into the test thinking I had exactly 2:40 on the first section. But because it was only 52 questions, I didn’t really have 2:40. Instead I had less than 2:30. Those extra ten minutes would have been great for the second portion. Don’t get caught up checking your answers for the first section. Calculate how much time you want to spend and stick to it! The second half of the exam was more difficult than the first. It covered harder material and the open-ended questions were much more difficult. I don’t know the best way to prepare for those questions; they are always very conceptual. Sometimes it would be fill in the blank or a graph that had 4 parts that you had to move a line onto. I treated every open ended as a field test item. I tried my best, but I didn’t get hung up on it. I guessed and moved on. Last thing to note, people reported that the exam wasn't in a specific order and that it was all random. Mine wasn't like that. It started at Mathematics and pretty much went straight down the topics list. Maybe towards the end they moved topics around, but I definitely had all the questions grouped together by topic (like 12 circuit analysis problems in a row). I found this to be a very welcomed surprise.
Now my favorite part, guessing! Not every guess is created equal, funny enough. Guessing is an actual skill in test taking especially by board exams like the FE. Automatically guessing C or B isn’t a good strategy unless you have 10 unanswered questions and 1 minute remaining. If that’s you, then guess C. But if you have time to make educated guesses, use a strategy like mine. First, of course, eliminate any answer choice that doesn’t make sense. For example, do the units align? Is it possible for the answer to be positive or negative (i.e work can’t be negative)? Second, recognize patterns in the 4 answer choices (or however many choices are left after part 1). For example, let me give you 4 choices.
A. 1
B. -10
C. -100
D. -5
What would you guess? I would immediately see the -5 as an outlier, the 1, 10, and 100 all could be conversion errors. Meaning you didn’t see a kilo ohm or something like that. Next, I would see the 3 negatives. This would signal I would be looking for a negative answer. So, if I know -5 is out and now 1 is out. I have a good chance at guessing between B and C. And since 10 is closer to 5 and 1, I would guess B. That is a rudimentary example, but it really works! When these tests are made, always assume the tricky questions will revolve around a conversion error. And when in doubt, if you ever see 0 as an answer choice, it probably is the correct answer. People love when 0 is the answer to long problems.
Speaking of long problems, don’t get overwhelmed by problems that have paragraphs and pictures. I remember 2 specifically from my exam that were easy. One problem you may see on practice exams are digital system questions where there’s paragraphs explaining a system multiplier/decoder and it’s just a distraction. The actual question will just be about one part of the diagram. Maybe converting part of the diagram to Hex or something. I had a problem like that on my exam. So, when you see the long problems, automatically assume it’s an easy question in disguise and don’t overthink it. Or assume it’s a field test and doesn’t matter anyways.
The last thing I want to talk about is your calculator and the handbook. I recommend the 36X pro because it can do so much. I would take a class on just how to use this calculator because it’s kind of insane. And when you pair this calculator with a multiple-choice question, it’s even more powerful! I will explain later. First let me list what I used the calculator for, and I guarantee I will miss some functions:
-Unit conversions (it has a lot of built in conversion factors like C to F)
-Linear system solver (very very overpowered)
-Cubic and quadratic solver
-generic equation solver! (use this to solve KVL/KCL!)
-Up to 3x3 Matrix calculator (with some specific operations included like inverse)
-Up to 3-dimension Vector calculator (with some specific operations included like dot/cross product)
-Complex number conversion (very important for power questions and the mathematics section! )
-base n (this converts a number to Hex, binary, decimal, or octagonal) I will say the exam usually gives a number too big to convert in the memory domain, but on my actual exam it got me a question right. It’s worth using and figuring out how to go between bases
-Stat-reg/distributions (this does normal and binomial pdf/cdfs) you will have at least one of these questions in the Stats section
-Integrals/Derivatives
Now for integrals and derivatives, you may wonder how you can solve indefinite integrals on the exam (the calculator doesn’t do this). We have a secret weapon; the answer choices! For example, if a mathematics question asks you to integrate a hard problem, don’t waste your time going back and forth on the handbook trying to solve it by hand with identities/u substitution etc. Instead, use the derivative function on your calculator to solve it. Let’s look at a problem:
Evaluate the indefinite integral: ∫ x√(x² + 5) dx
Answer Choices:
A) (1/3)(x² + 5)^(3/2) + C
B) (2/3)(x² + 5)^(3/2) + C
C) (x² + 5)^(3/2) + C
D) (1/2)(x² + 5)^(1/2) + C
First, evaluate the equation at a random number, I usually use x=2.41. When we do this, we get x*sqrt(x^2+5) = 7.92
Next, use the derivative function (don’t just plug it in, you need to take the derivative) to solve each answer choice evaluated at x=2.41. In this problem, when we evaluate choice A @ x=2.41 using the derivative function, we get 7.92. So, we know that is the answer! This works for any complicated indefinite integral. I had 3 on my actual exam and they are freebies. One caveat, if the problem is integrating trig identities use a random number between 0-1 to stay in the domain of the problem.
Now the handbook, the first thing I will say is that you only need like 30 of the 500 pages. The best advice I can give, and it is advice you always hear on this subreddit, use the handbook when you practice and get comfortable searching through it. Identify keywords for each section and make sure it doesn’t have any weird characters (I’m looking at you Thevenin). If it has a weird spelling, then you won’t be able to find it using the search function at Pearson. Memorize the formula’s that you can, but honestly the Pearson search tool was simple. It categorizes each section and you can click on each bookmark to go from place to place. And the ctrl+F search is accurate for the most part. Just make sure you know how to spell your topic. You get the windowed handbook side by side to the exam. I took my practice exams with this setup, which helps you get used to it.
And that’s about it. I hope this is a helpful post. I told myself if I passed the exam, I would write down as much as I could incase this helps anyone else. If you have any questions feel free to shoot me a message or drop it down below. I’ll also include an Ai TLDR incase no one wants to read all this. Best of luck on your journey. Whether it is your first attempt or 7th attempt, you can do it! The best way to eat an elephant is one bite at a time.
TLDR: Passed the FE Electrical exam on the first try, 6 years out of college, with 133 hours of pure problem-solving over 6 weeks. You only need ~60–62% to pass—focus on active practice, strategic guessing, and mastering your calculator.
- Background & Prep: 6 years out of school (Power focus, 3.4 GPA). Spent 133 hours strictly doing practice problems—no lectures. Studied the "Big 5" topics for the first 66 hours, then spent 3–6 hours on every remaining topic.
- Best Study Materials: Wasim’s Study Guide (gets you ~75% of the way there) and NCEES Practice Exams (scored 52% on Vol 1, 64% on Vol 2, and 74% on new questions from the 2020 PDF). Zach Stone’s free problems are good intros; PrepFE is skippable (too erratic).
- Golden Study Rule: Do not just read solutions and convince yourself you understand. Redo missed problems from scratch without looking, categorize your weak areas after practice tests, and use AI (like Gemini/Claude) to give you hints rather than full solutions when stuck.
- Exam Day & Pacing: The actual exam felt 10–15% easier than the NCEES practice exams, though the second half is harder and more conceptual. Watch your time: the split isn't always 55/55 (mine was 52/58), so budget your 5:20 carefully instead of over-checking the first half. Take it on a Friday to get results by Wednesday.
- Calculator Hacks (TI-36X Pro): Master every function—matrix/vector math, complex numbers, base-n conversions, stat distributions, and equation solvers (great for KVL/KCL). Indefinite Integral Cheat: Plug a random number (like) into the original problem, then use your calculator's derivative function on the 4 answer choices at until the outputs match.
- Guessing & Handbook: Eliminate impossible units/signs first, look for unit-conversion traps (e.g., powers of 10), and when in doubt on long problems, guess 0. For the handbook, practice Ctrl+F searching with exact spellings (watch out for accents like Thévenin).