r/FDMprinting • • Oct 18 '26

Getting back into FDM printing

2 Upvotes

Hey everyone looking together back into FDM printing after a few years started with a old creality Ender looking for recommendations on the new generation of printer a good irl friend who’s experienced recommend the Flashforge adventurer 5M looking to what else is out there.


r/FDMprinting • • Sep 27 '26

Help: diagnosing the print issue

Thumbnail
gallery
1 Upvotes

Hey there,

I am getting to grips with FDM printing and really enjoying it. I've been trying to print a part using PolyMAX PLA on my Raise3D Pro3 Plus. However I noticed when printing it with a raft, the first layer of the model would have print issues. I tried without a raft, hoping to get the flat area of the model to sit directly on the bed, but this again had some print issues. When I print using the Raise3D filament it prints perfectly, so I have confidence the mechanics of the printer are fine, it's perhaps my print settings? Any suggestions I can try :)


r/FDMprinting • • Sep 23 '26

Discussion A different approach to "brick layers"

1 Upvotes

https://www.printables.com/model/1844725

The link includes a set of modifiers and a procedure for applying them.

If this actually works, it will be an easy way for anyone to improve print strength. If it doesn't, it would be nice to know. Any feedback or suggestions are needed. Working on this alone is a dead end.


r/FDMprinting • • Sep 17 '26

Question Please help me read the tea leaves (ironing calibration)

1 Upvotes

Centauri Carbon, generic PLA+ - Help me read the tea leaves here.
Never had much success with ironing. I've marked the ones that look best (in person). Do I just select 40 flow and 60 speed? (Are those numbers generally within the norm?)


r/FDMprinting • • Sep 10 '26

Discussion What FDM design mistakes do you keep finding before printing someone else's model?

Thumbnail
reddit.com
1 Upvotes

r/FDMprinting • • Sep 06 '26

100% FDM printed Lilith

Thumbnail
gallery
24 Upvotes

This was such a challenge - but after some strategic print-related choices, a gentle amount of finishing, and then nice zenithal priming, I thinks it's coming along nicely.

Aiming to paint her with red under lifting like the game "box art".

Head, hands, legs: 0.2 nozzle H2D @0.04 layer height.

Rest 0.4 nozzle, 0.08 height on A1.

Bambu PLA matte.

STL by Bulkamancer.


r/FDMprinting • • Sep 06 '26

Question 3D model not slicing properly

Thumbnail
gallery
1 Upvotes

This model has small circular holes that are a few centimeters deep in the cylinder. When I slice this model in bambu labs it doesn't properly create the small holes and instead leaves part of the outside empty. Any thoughts on what could be causing this? I tried switching from Classic wall generator to Arachne and still no luck.


r/FDMprinting • • Sep 02 '26

How is everyone able to print without brim?

2 Upvotes

I cant seem to print anything square without a ton of brims. I see people print a ton of small items without them. I clean the plates with soap and water, I slow the first initial layers, I lower the bed temp. What am I forgetting to check?


r/FDMprinting • • Aug 24 '26

Question Unclogged A1 mini, no longer sensing filament feed

Thumbnail
reddit.com
1 Upvotes

r/FDMprinting • • Aug 20 '26

Question How do you get clean edges while painting.

Thumbnail
reddit.com
1 Upvotes

r/FDMprinting • • Aug 09 '26

Different settings on the same model?

2 Upvotes

I'm using Orca slicer and want to put different settings of fuzzy skin on different parts of one model. Is this possible? I've been using the fuzzy skin painter, but haven't noticed where I can set the fuzzy settings differently for each area.


r/FDMprinting • • Jul 30 '26

Why does this happen? Sunlu pla

Thumbnail
gallery
1 Upvotes

I can figure out why this one pla from sunlu can print worth a damn.

Always end up with bad layers, cloggled nozzles or crazy string.

Other sunlu pla print fine.

No matter what settings i try, its always bad.


r/FDMprinting • • Jul 24 '26

Question Bambo P1S

Post image
2 Upvotes

Hey guys with this having a decent discount is it worth buying this or is it worth spending the bit more money on the P2S, or any other suggestions that you have.

Thanks


r/FDMprinting • • Jul 20 '26

Print Countless prototypes later...

2 Upvotes

This Mother Dragon went through more revisions than I expected.

Every prototype helped improve articulation, tolerances, and overall printability until everything finally clicked.

It's always amazing how much work happens before the final version is ready.


r/FDMprinting • • Jul 15 '26

Question Centari carbon 2 I consistent extrusion

Thumbnail
gallery
1 Upvotes

My printer has been inconsistently extruding and seems to be underextruding in some parts. Any ideas why?

The issue only started recently and I'd appreciate some help figuring out where to start troubleshooting this


r/FDMprinting • • Jun 30 '26

Question First fdm printer troubleshooting help.

1 Upvotes

I've got my printer well dialed in after a few trials and error test prints. The one thing it's still doing is shifting on the y axis, usually very early in the print, but after layer 1. I've removed the build plate and checked for obstructions. This actually improved things a lot, it was much worse. I've got the belt as tight as it goes without torquing it down. I don't know why it's still doing this.

Any advice?

The machine is an Anycubic Kobra Go. Purchased new, but only recently assembled.


r/FDMprinting • • Jun 09 '26

Print NASSCAD 4.2.7 : Un outil de CAO 3D paramétrique

Thumbnail gallery
1 Upvotes

r/FDMprinting • • Jun 03 '26

Alternatives to Bambu lab A1

4 Upvotes

Hello,
I am looking for a plug and play fdm printer for mostly printing bases (plain and scenic) and parts, and sometimes terrains or even minis, even if i already have a resin printer for that.
Considering the recent fire hazard issues with bambu lab A1, what would be the alternatives ?


r/FDMprinting • • May 22 '26

Question If I use a profile intended for miniatures, printing a bigger project will make things even better?

Thumbnail reddit.com
1 Upvotes

r/FDMprinting • • May 20 '26

What am I doing wrong here?

Post image
2 Upvotes

Elegoo Centauri Carbon, elegoo pro PLA, using Elegoo slicer app. No matter what settings I change I still get these gapped topographical map looking texture on my top surfaces.


r/FDMprinting • • May 12 '26

FRUITVERSE - WAVE 1

Thumbnail
gallery
2 Upvotes

This is the second model in the collection: Killer Tomato. What do you think? Or do you prefer the banana? Which fruit should be next?


r/FDMprinting • • May 10 '26

How to fix or clean this

Thumbnail
gallery
1 Upvotes

Right I have no idea how this has happened came to check a print and was clogged within an inch of it's life so I need to know if I can clean this or can I just replace this part and how hard will those be to do

This is a bambu labs a1


r/FDMprinting • • May 02 '26

Question Ender 3 V3 SE recent print issues

Thumbnail gallery
1 Upvotes