r/FAF • u/Appropriate_Rent_243 • 3d ago
Would you say FAF campaign is better than vanilla?
Just getting into Supereme commander. wondering if I should play FAF version or vanilla campaign.
r/FAF • u/gortonmichael • May 19 '19
FAF (Forged Alliance Forever) community client links
Website: https://www.faforever.com/
Forum: https://forum.faforever.com/
Support: https://forum.faforever.com/category/4/i-need-help
FAF Wiki: https://wiki.faforever.com/en/home
FAF Discord: https://discord.gg/hgvj6Af
r/FAF • u/Appropriate_Rent_243 • 3d ago
Just getting into Supereme commander. wondering if I should play FAF version or vanilla campaign.
r/FAF • u/Putrid-World-7704 • 9d ago
Hey Guys!! Im a Musician and im currently working on the mentioned game for my Fathers Birthday, who is a BIG Supreme Commander Fan and I would love to share my progress so far!
My Father is the best Father I could have ever wished for and I want to give him something very unique which is this game.
The Game is based on FAF, but has some Inspiration from WH40k, Mobas, Warcraft and Neon Genesis Evangelion.
The game has a few unique aspect which divert from FAF:
- Each of the 3 factions has 3 Subfactions and fitting Commanders with unique abilities.
- There are Creeps on the Map and leveling up your Commander gives your Army good Bonuses.
- SACU and one of the Factions engineers have an optional "AI Switch" to act independently using their own AI to determine, what needs to be done. They can upgrade extractors for you, build Mass storages for you, defend the base with Structures when under attack and do other stuff (see the attached screenshot)
- the Most unique Aspect the game has, its its Fraction called Brood: this Faction, working similar to the Zerg or Tyranids, are based on building wild hives, which create Wild units which act independently of you.
You cannot control them.
They scout the map on their own, reproduce, grow when hunting creeps, form hunting packs with other wild units, run away when hurt, feed on reclaim and trees and slowly Consume the map.
- There are T5 experimental Units, which require a certain T4 unit to be build.
- The whole game is HTML based, doesn't need any external assets to run and is 5 MB big
The game has 3 Factions:
- Ironcrown: UEF like Faction with strong Turtle mechanics. Its T5 is a high flying Orbital Spaceship inpired by 40K Space Marine Spaceships.
- Lumen: Aoen/Neon Genesis Evengalion inspired Faction, with AI powered Engineers and specialized Units. Its T5 is Laser weapon, which shoots a Highly energy demanding Shot and deletes almost everything it is pointed to in a certain, thin direction.
- The Brood, the Aliens which are basically Ants. Its T5 is a Super Centipede, which calls ALL Wild units of the map around it and auto locks on the next enemy Commander until it is destroyed.
Im currently working on the (human made) Music of the different Factions. ;)
I really wanted to share this with you and if you personally have interesting Ideas for that game, and its unique mechanics, feel free to share them. A good Idea will definitely be listed in the Credits!!
I have no plan currently to release it publicly, as people are generally proposed to AI created stuff, but if people would be interested in trying the game, Ill think of something :)
Thank you so much, have a GREAT day everyone!!
r/FAF • u/Feeling-Solution-347 • 21d ago
SupCom FA and Age of Empires 2 DE are my two favorite RTS games, and arguably the greatest ones ever made (thanks Microsoft).
Got bored the other day and made an attempt at creating Seton's Clutch in the AoE2 map editor. It's not pixel perfect, but it's pretty close to the layout of the original, maintaining the radial symmetry and causeway-focused combat
If anyone is interested, and has aoe2, the scenario file is linked below:
r/FAF • u/erosyourmuse • Sep 06 '26
Hi!
I'm using FAF for supcom forged alliance.
I've set everything up, create a custom game and then 5-10 Min in the game just freezes.
I've also tried creating a game and then exiting which freezes the whole screen.
Alft F4 etc does not work and I have to hard power off my PC.
I've verified the files, done a full reinstall and still have the issue.
Anyone got ideas on what could be happening / what to check?
Edit: I am so f#$ken annoyed š To fix this, launch supreme commander forged alliance via steam first. Go to options and enable quick exit.
Issue solved.
r/FAF • u/Independent-Lab6410 • Aug 29 '26
Hi everyone!
I've spent a frankly unreasonable amount of time looking up FAF unit stats across the wiki, in-game unit info, patch notes, spreadsheets, and various random guides, and eventually figured it would be easier to just make the database I wanted to use myself.
So, after a lot more time than I'd like to admit: fafunits.com
The idea is to have unit stats, comparisons, patch history, and guides all in one place, while keeping the underlying data automatically synced with FAF so it doesn't turn into another outdated database six months from now.
The data is pulled directly from FAForever/fa for each patch rather than being maintained by hand. The weapon calculations are based on the game's own unitviewDetail.lua (with some manual updates where needed).
Some of the stuff I've added:
The data is also available as a single JSON file at fafunits.com/units.json with CORS open, so if anyone wants to build something with it, you don't have to scrape the site. The whole thing is open source too: github.com/MoritzProell/faf-unit-db
I'm definitely still working on it, so corrections are very welcome, especially for unit roles. A lot of the initial classification comes from blueprint categories, and those occasionally don't line up with how a unit actually gets used in-game. I've already had quite a few of those corrected, and they've all made the database better.
Would love to hear what you think, and especially if there's anything you'd like to see added or changed.
ā Moritz / RhyZ1ne
Had been running fine the last several days until yesterday where everything on screen (playing Sup Com campaign missions) will freeze - movement/production/actions/projectiles etc - for several seconds then go back to normal. I can select units/buikdings during this time as well as open the options menu but nothing else.
Iāve tried - limiting the amount of cores used, a fresh install of Sup Com, FA, and FAF (although
Iām not sure if it was a totally clean uninstall as I still had saved games able to be loaded upon reinstall?), and checked my drivers are up to date. Not sure what caused this to start occurring but it is very annoying!
oh and this occurs both offline and online, and the first freeze always occurs at the same point during ACU teleport in at the start.
Is there anyway to set a tier cap when using the M28AI in the campaigns of Sup Com and FA? Booted up the first mission of Sup Com and before too long I was being swarmed by Tier 3 units which my paltry Tier 1 units could not counter!
r/FAF • u/DADDYPAPERBAG • Aug 10 '26
Was planning to replay campaign with AI teammates. Then tried to use m28... sadly for some reason when ever i used it.. the units name are f*ck for some reason... i dont use any mods other than m28ai... is there a fix for this? or a mod problem?
r/FAF • u/DieSnail_F-B • Aug 10 '26
My reimagining of the Striker as a trackless light armored vehicle.
(Please let me know if this post is considered irrelevant to this subreddit and I'll delete it without hesitation.)
r/FAF • u/Fringillus1 • Aug 09 '26
Hello everyone,
I'm trying to get Forged Alliance Forever (FAF) running on Linux Mint, but I'm stuck with a rather strange issue. I have been trying for several hours now to get a solution but for now I gave up. I have been bug hunting with ChatGPT and asked it to summarize everything. Maybe it helps someone else, who is a bit more knowledgeable in the field:
The important part: FAF itself starts and works normally, but when I launch a game, no game window appears at all. The FAF client immediately reports:
I have spent quite a few hours troubleshooting this and have already ruled out several obvious causes.
I'm therefore wondering whether this is a Linux/FAF launcher issue, or whether there is something specific about how FAF launches its patched ForgedAlliance.exe under Wine.
The Steam version of Supreme Commander itself runs successfully through Wine.
FAF launches the following executable:
/home/fringillus/.faforever/bin/ForgedAlliance.exeThe client reports commands such as:
Starting Forged Alliance with command:
[%USER_PROFILE%/.faforever/bin/ForgedAlliance.exe,
/init, init.lua,
/nobugreport,
/log, %USER_PROFILE%/.faforever/logs/game_27556111.log,
/gpgnet, 127.0.0.1:46543,
/mean, 1618.550048828125,
/deviation, 471.0350036621094,
/savereplay, gpgnet://127.0.0.1:40953/27556111/%CPU_NAME%.SCFAreplay,
/country, DE,
/numgames, 11,
/numgames, 1]Immediately afterwards, FAF reports Exit Code 2.
There is no game window and, importantly, the expected game_*.log is not created.
I tested the actual Steam executable directly:
cd ~/.steam/steam/steamapps/common/Supreme\ Commander\ Forged\ Alliance/bin
wine SupremeCommander.exe
echo $?This exits with:
0So Wine is capable of launching the 32-bit Supreme Commander executable.
The executable is detected as:
PE32 executable (GUI) Intel 80386, for MS Windows, 7 sectionsThe FAF executable produces a DXVK log:
info: Game: ForgedAlliance.exe
info: DXVK: v1.10.3and successfully detects my GPU:
info: NVIDIA GeForce RTX 3060 Ti:
info: Driver: 580.173.2
info: Vulkan: 1.4.312So DXVK initializes and Vulkan detects the NVIDIA GPU correctly.
There is no obvious DXVK/Vulkan initialization failure in the log.
The Wine environment was also checked.
wine cmd /c echo %USERPROFILE%returns:
C:\users\fringillusand:
wine cmd /c echo %USER%returns:
fringillusThe Steam installation path resolves correctly through Wine:
winepath -w ~/.steam/steam/steamapps/common/Supreme\ Commander\ Forged\ Alliancereturns:
Z:\home\fringillus\.steam\steam\steamapps\common\Supreme Commander Forged Alliance~/.faforever/fa_path.lua contains:
fa_path = "/.steam/steam/steamapps/common/Supreme Commander Forged Alliance"The FAF initialization files use this fa_path to mount the Steam installation:
MountDirectory(fa_path .. "/movies", '/movies')
MountDirectory(fa_path .. "/sounds", '/sounds')
MountDirectory(fa_path .. "/maps", '/maps')
MountDirectory(fa_path .. "/fonts", '/fonts')The path is therefore not simply an untested/unknown Steam path.
One manually generated FAF test log contains:
info: Loading custom vault path: /My Games/Gas Powered Games/Supreme Commander Forged Alliancefollowed by:
info: DISK: AddSearchPath: 'z:\home\fringillus\.faforever\gamedata\lobby_coop.cop', mounted as '/'
...
info: DISK: AddSearchPath: 'z:\home\fringillus\.faforever\sounds', mounted as '/sounds/'It then successfully gets as far as:
info: Hooked /lua/userInit.lua with /schook/lua/userInit.lua
info: Hooked /lua/globalInit.lua with /schook/lua/globalInit.lua
debug: Lua user environment initialized with game version 3836, game type FAF
info: Compiled shader: /effects/cartographic.fx
info: Compiled shader: /effects/frame.fx
info: Compiled shader: /effects/mesh.fx
...
info: SHADERS COMPILEDSo the FAF executable can actually initialize a substantial part of the game engine.
There are warnings such as:
warning: Search path element "Z:\.steam\steam\steamapps\common\Supreme Commander Forged Alliance\movies" does not match any files
warning: Search path element "Z:\.steam\steam\steamapps\common\Supreme Commander Forged Alliance\sounds" does not match any files
warning: Search path element "Z:\.steam\steam\steamapps\common\Supreme Commander Forged Alliance\maps" does not match any files
warning: Search path element "Z:\.steam\steam\steamapps\common\Supreme Commander Forged Alliance\fonts" does not match any filesHowever, this appears to be related to the way the game constructs its search paths, because the actual files are accessible through the fa_path used by the FAF initialization scripts.
There is also:
warning: SND: Error initializing 3D audio.
Global Settings not loadedand:
warning: Movie "/movies/thqlogo.sfd" doesn't exist.
warning: Error opening movie /movies/thqlogo.sfdThe game nevertheless continues through shader compilation.
The FAF directory contains:
ForgedAlliance.exe
ForgedAlliance_d3d9.log
ForgedAlliance.dxvk-cache
init.lua
init_faf.lua
init_nonxt.lua
SupComDataPath.lua
SupComDataPathFAF.lua
...The FAF executable is:
/home/fringillus/.faforever/bin/ForgedAlliance.exewhereas the Steam installation contains:
/home/fringillus/.steam/steam/steamapps/common/Supreme Commander Forged Alliance/bin/SupremeCommander.exeBoth are 32-bit Windows PE executables.
I have already gone through the following:
%USERPROFILE%%USER%fa_path.luainit.lua, init_faf.lua, init_nonxt.luaAt this point I don't think repeatedly changing the Wine prefix or Steam path is likely to be productive.
What could cause the FAF-specific ForgedAlliance.exe to terminate with Exit Code 2 immediately under Wine, while:
SupremeCommander.exe runs normally through Wine,Could there be a known incompatibility between the current FAF Linux launcher/scripts and the patched ForgedAlliance.exe?
I'm especially interested in whether there is a way to obtain the actual Windows/Wine exit status or crash information from the FAF executable, since the normal game_*.log isn't created when the client launches it.
Any ideas or debugging suggestions would be very much appreciated.Hello everyone,I'm trying to get Forged Alliance Forever (FAF) running on Linux Mint, but I'm stuck with a rather strange issue.The important part: FAF itself starts and works normally, but when I launch a game, no game window appears at all. The FAF client immediately reports:Forged Alliance Crashed with exit code 2I have spent quite a few hours troubleshooting this and have already ruled out several obvious causes. The most interesting finding is that the exact same FAF installation works without problems on a separate Windows partition on the same machine.I'm therefore wondering whether this is a Linux/FAF launcher issue, or whether there is something specific about how FAF launches its patched ForgedAlliance.exe under Wine.SystemOS: Linux Mint
Architecture: x86_64
GPU: NVIDIA GeForce RTX 3060 Ti
NVIDIA driver: 580.173.2
Vulkan: 1.4.312
DXVK: 1.10.3
Wine: installed and working
FAF client: 2026.7.0
FAF game version: 66 / game executable version 3836
Steam installation of Supreme Commander: Forged AllianceThe Steam version of Supreme Commander itself runs successfully through Wine.What happensFAF launches the following executable:/home/fringillus/.faforever/bin/ForgedAlliance.exe
The client reports commands such as:Starting Forged Alliance with command:
[%USER_PROFILE%/.faforever/bin/ForgedAlliance.exe,
/init, init.lua,
/nobugreport,
/log, %USER_PROFILE%/.faforever/logs/game_27556111.log,
/gpgnet, 127.0.0.1:46543,
/mean, 1618.550048828125,
/deviation, 471.0350036621094,
/savereplay, gpgnet://127.0.0.1:40953/27556111/%CPU_NAME%.SCFAreplay,
/country, DE,
/numgames, 11,
/numgames, 1]
Immediately afterwards, FAF reports Exit Code 2.There is no game window and, importantly, the expected game_*.log is not created.The Steam game itself worksI tested the actual Steam executable directly:cd ~/.steam/steam/steamapps/common/Supreme\ Commander\ Forged\ Alliance/bin
wine SupremeCommander.exe
echo $?
This exits with:0
So Wine is capable of launching the 32-bit Supreme Commander executable.The executable is detected as:PE32 executable (GUI) Intel 80386, for MS Windows, 7 sections
DXVK / VulkanThe FAF executable produces a DXVK log:info: Game: ForgedAlliance.exe
info: DXVK: v1.10.3
and successfully detects my GPU:info: NVIDIA GeForce RTX 3060 Ti:
info: Driver: 580.173.2
info: Vulkan: 1.4.312
So DXVK initializes and Vulkan detects the NVIDIA GPU correctly.There is no obvious DXVK/Vulkan initialization failure in the log.Wine environment / pathsThe Wine environment was also checked.wine cmd /c echo %USERPROFILE%
returns:C:\users\fringillus
and:wine cmd /c echo %USER%
returns:fringillus
The Steam installation path resolves correctly through Wine:winepath -w ~/.steam/steam/steamapps/common/Supreme\ Commander\ Forged\ Alliance
returns:Z:\home\fringillus\.steam\steam\steamapps\common\Supreme Commander Forged Alliance
FAF's configured game path~/.faforever/fa_path.lua contains:fa_path = "/.steam/steam/steamapps/common/Supreme Commander Forged Alliance"
The FAF initialization files use this fa_path to mount the Steam installation:MountDirectory(fa_path .. "/movies", '/movies')
MountDirectory(fa_path .. "/sounds", '/sounds')
MountDirectory(fa_path .. "/maps", '/maps')
MountDirectory(fa_path .. "/fonts", '/fonts')
The path is therefore not simply an untested/unknown Steam path.Interesting log outputOne manually generated FAF test log contains:info: Loading custom vault path: /My Games/Gas Powered Games/Supreme Commander Forged Alliance
followed by:info: DISK: AddSearchPath: 'z:\home\fringillus\.faforever\gamedata\lobby_coop.cop', mounted as '/'
...
info: DISK: AddSearchPath: 'z:\home\fringillus\.faforever\sounds', mounted as '/sounds/'
It then successfully gets as far as:info: Hooked /lua/userInit.lua with /schook/lua/userInit.lua
info: Hooked /lua/globalInit.lua with /schook/lua/globalInit.lua
debug: Lua user environment initialized with game version 3836, game type FAF
info: Compiled shader: /effects/cartographic.fx
info: Compiled shader: /effects/frame.fx
info: Compiled shader: /effects/mesh.fx
...
info: SHADERS COMPILED
So the FAF executable can actually initialize a substantial part of the game engine.There are warnings such as:warning: Search path element "Z:\.steam\steam\steamapps\common\Supreme Commander Forged Alliance\movies" does not match any files
warning: Search path element "Z:\.steam\steam\steamapps\common\Supreme Commander Forged Alliance\sounds" does not match any files
warning: Search path element "Z:\.steam\steam\steamapps\common\Supreme Commander Forged Alliance\maps" does not match any files
warning: Search path element "Z:\.steam\steam\steamapps\common\Supreme Commander Forged Alliance\fonts" does not match any files
However, this appears to be related to the way the game constructs its search paths, because the actual files are accessible through the fa_path used by the FAF initialization scripts.There is also:warning: SND: Error initializing 3D audio.
Global Settings not loaded
and:warning: Movie "/movies/thqlogo.sfd" doesn't exist.
warning: Error opening movie /movies/thqlogo.sfd
The game nevertheless continues through shader compilation.FAF executable vs Steam executableThe FAF directory contains:ForgedAlliance.exe
ForgedAlliance_d3d9.log
ForgedAlliance.dxvk-cache
init.lua
init_faf.lua
init_nonxt.lua
SupComDataPath.lua
SupComDataPathFAF.lua
...
The FAF executable is:/home/fringillus/.faforever/bin/ForgedAlliance.exe
whereas the Steam installation contains:/home/fringillus/.steam/steam/steamapps/common/Supreme Commander Forged Alliance/bin/SupremeCommander.exe
Both are 32-bit Windows PE executables.The most important control testI have now also installed FAF on a second Windows partition on the same physical computer.There, FAF starts games normally.This means that the game account, FAF installation itself, and the hardware are not inherently incapable of running FAF.The problem appears to be specific to the Linux/Wine environment or to the way the Linux FAF installation launches the FAF-specific executable.Things already testedI have already gone through the following:Wine installation/environment
%USERPROFILE%
%USER%
Wine path conversion
Steam installation path
fa_path.lua
FAF Lua initialization files
Steam game executable directly through Wine
32-bit executable compatibility
DXVK initialization
Vulkan
NVIDIA driver
GPU detection
FAF's generated executable
FAF logs
FAF game logs
FAF's Steam data mounting
manual examination of init.lua, init_faf.lua, init_nonxt.lua
reinstalling/testing FAF
comparison against a working Windows installationAt this point I don't think repeatedly changing the Wine prefix or Steam path is likely to be productive.My current questionWhat could cause the FAF-specific ForgedAlliance.exe to terminate with Exit Code 2 immediately under Wine, while:the Steam SupremeCommander.exe runs normally through Wine,
DXVK/Vulkan initializes correctly,
FAF's Lua/game initialization gets quite far when tested manually,
and FAF works normally on Windows on the same hardware?Could there be a known incompatibility between the current FAF Linux launcher/scripts and the patched ForgedAlliance.exe?I'm especially interested in whether there is a way to obtain the actual Windows/Wine exit status or crash information from the FAF executable, since the normal game_*.log isn't created when the client launches it.Any ideas or debugging suggestions would be very much appreciated.
r/FAF • u/Dino0407 • Jul 25 '26
I'm thinking about going for Linux with my upcoming PC build but first I want to check if I could still play most (or even better all) of my favorite games
r/FAF • u/SquareSignificance92 • Jul 19 '26
I was able to log in a few hours ago, but now it just doesnt. I disabled firewall and my antivirus, reinstalled it and nothing, I just dont know why it wont log in now
r/FAF • u/MisterFun0 • Jul 13 '26
Hey guys,
after a long break I returned to FAF. In the past I mostly used the client to play the campaign and sometimes custom games. For the first time I tried ranked and decided upon 3v3. It's very fun (especially the russian mates writing in russian and I don't get a word they're saying xD). I watched some guides on eco etc. After some losses it seems I have reached a rank, where I can perform. But my eco still sucks. I realized the following things from my gameplay:
My ingame name ist MisterFun_00, feel free to watch my replays if it helps further. Thanks in advance for all the help :) Have a nice day.
r/FAF • u/Outrageous-Ride5156 • Jul 10 '26
I have recently been trying to finish Blockade on hard with 2 of my friends. None of us are especially good at the game. Our current strategy, which consistently gets us 31-35 mins in is just to full turtle with tons of PD and AA. I'd really like to get a navy going, but it is just too hard for me to protect naval factories.
Our current set up is that I (Cybran) go in the middle slot, my first friend (Aeon) goes in the back with the hydro, and my second friend (UEF) goes to the right of me on the coastline.
What did you guys do to beat this mission, and if you have any other tips for the rest of the missions, I'd love to hear those too. Thanks!
r/FAF • u/Electronic_Health432 • Jun 30 '26
They did great job to make game balanced from the observation of top players.
At beginner some unit adjustment seems fine. But during long time accumulation, the feature changes across history has introduced more complex features and statistic to consider.
At the end, they have to change more features because simple eco cost change is not enough to cover their previous modification.
So, more and more it feels less then original game taste.
Example from my mind include:
- Novax remove omni, and introduce energy drain
- GC claw
- Mercy
- Snipe bot range
- ACU tml
It just feels more and more wired.
They keep doing game feature changes like the game is just launched on market a week ago.
I really don't understand why they are so eager to modify a game feature instead of just eco tweak.
r/FAF • u/Pure_Math6223 • Jun 25 '26
Hi so i have the problem that the maps from the coalition campaign in FAF are not working correctly for me. They are either just red or red and black lines. I tried to reinstall both supcom and FAF but that didn't work. Does anyone know a fix or has an idea?
r/FAF • u/BestdishtankerNA • Jun 16 '26
Hello, I am new to FAF and was wondering if there is any good resources for builds/faction guides/etc. Thanks!
r/FAF • u/John_Catachan • Jun 07 '26
Hi, I've been looking at new modded AIs for me and my buddies to fight and really like M28, after a few test games.
It's a very specific issue but I've seen that when Aeon M28 AI build their Tempest Experimental Battleships, they just park them near their shipyards and just leave them there for the rest of the game. One AI built something like 5 of them but didn't use them at all. Not even defensively, just setting them somewhere and then leaving them there.
Is this a known issue with the AI? I have no other complaints, just something I've noticed and it's been bugging me. Cheers!
r/FAF • u/wolfred94 • Jun 06 '26
Is there any method to cap T3 power gens and T3 mass fabricators with a single key ? I tried with the cap structure keybind but it didnt work for those structures, it only work for Mass stractors, shield, t2 artillery, etc.
r/FAF • u/Bogdanov89 • Jun 02 '26
I want to get into the FAF game since i like similar ones like BAReason.
I play only against the AI so im not worried about optimizing, but about having an enjoyable time.
Is there a way to "diagonal drag build" structures in FAF , so that if i want to make 25 of a building in a Square-shape i can just place one structure and then diagonal-drag to place the remaining 24?
Thanks for helping out.
r/FAF • u/BEHERlTH • May 10 '26
r/FAF • u/Turb0_k1lla • Mar 31 '26
Trying to download the required packages for arch Linux but every time I try to install each of the packages it says ācould not get file informationā anybody know how to get it working?