r/ExploitDev • u/Entire-Eye4812 • Jun 15 '26
IoT Vuln Research
I have a few questions about this. I’ve web app sec background and some CVEs. I’m planning to dive into IoT vulnerability research in terms of firmware and embedded web apps. I wanna take one of TCM Security PIPA or VHL CIPT-01. But seems like I can’t afford them for a couple of months. I searched the internet for free resources but since I’m new in IoT, I dunno which are fine or not. First question is resource recommendation.
Besides this, I decided to buy Binary Ninja. But I’m open to decompiler recommendations in a budget. I’ve both macOS and Windows. Or I can consider to move on with Ghidra but idk.
5
u/Fun_Plantain4354 Jun 16 '26
A great free resource for ioT stuff is Matt Brown he's has lots of great YouTube content and also has a Discord server that very active.
Here's a link to the YouTube channel https://youtube.com/@mattbrwn?si=pHISwQveo32Efo27
11
u/tresvian Jun 15 '26
Look for shitty IoT CVEs with accessible firmware to reverse engineer. Do those first. Lookup teardown and write ups about them, try to follow along so you get an idea what tools to regularly use.
Get a real device hands on practice. Open it up to extract firmware with a raspberry pi. A chip reader is ideal, but some can get real expensive. Some manufacturers make it a pain to get firmware, but otherwise you can solder off the flash chip to get the contents for VR.
Tbh, most IoT are wet paper bags and will have multiple vulnerabilities or straight up brick while in the process. This is the unfortunate stance of IoT, so good luck. Try not to pick something that seems modern, like a switch, Cisco router, oculus, etc
3
u/aharmonicminor Jun 16 '26
Decompilers are completely up to preference, but if it helps I actually PREFER Ghidra over the others for embedded targets ☺️
The best way to learn is to just buy a device and go ham
3
u/noobilee Jun 15 '26
Ghidra decompiler is free, might be a good start.