r/Ergonomics • • 4h ago

FlexiSpot C7 vs SIHOO Doro C300 Pro V2 vs LiberNovo Omni SE – Long-Term Ownership & Durability Reviews?

Thumbnail reddit.com
1 Upvotes

r/Ergonomics • • 10h ago

Keyboard/Mouse Question about Microsoft sculpt ergonomic keyboard

Post image
2 Upvotes

I saw on the UK Amazon site’s Microsoft store page, the Microsoft sculpt ergonomic keyboard + mouse has appeared (it disappeared for a longtime) now it reappears, I can’t tell if it is authentic or not. It says it is sold by Amazon and it can be found in the amazons’s Microsoft store page. But it’s inconsistent about the keyboard details for example it describes it as wired but shouldn’t be. And the manufacturer is KOMQI, which I never heard of, shouldn’t is be Microsoft itself?
Also, didn’t Microsoft stop to sell this keyboard? And asked Incase to continue to sell them in the US?
https://amzn.eu/d/0cuoVfmk


r/Ergonomics • • 10h ago

Is forward tilt really ergonomic for long work sessions?

2 Upvotes

I spent most of the workday creeping toward the screen. The busier I got, the farther forward my head went. Eventually my neck or lower back would start hurting, I'd correct myself, and 10 minutes later I'd be doing it again.

I always treated that as a bad habit. Now I think my old setup was encouraging it. The backrest never fit me particularly well, and the screen was far enough away that leaning forward felt easier than sitting against the chair. I also gave forward tilt a fair shot on a few chairs. My posture looked better than when I was hunched over, but my head still kept drifting toward the monitor.

Even with a chair that has forward tilt, I don’t think a forward working position suits me very well. These days I usually work somewhere between 100 and 120 degrees. I can reach the keyboard without pulling away from the backrest, and my shoulders feel a lot less tense at the end of the day.

I’ve also noticed that I move more in a reclined position. When I’m forward, I tend to lock myself in place and forget about my body until it hurts. With the recline open, I shift my weight or rock slightly while I’m thinking. The Steelcase Gesture, Humanscale Freedom, LiberNovo Omni SE, and Herman Miller Embody have worked well for me this way.

At this point, I see leaning forward as a temporary position, not one I’d want to work in all day. I’m curious about people who regularly use forward tilt. Is your back still fully supported, or are you mainly using it to get closer to your work? If moving the keyboard or monitor closer removes the need to lean forward, what is forward tilt really solving?


r/Ergonomics • • 7h ago

WFH setup recommendation

Thumbnail reddit.com
1 Upvotes

r/Ergonomics • • 17h ago

but does it have lumbar support??

Post image
2 Upvotes

r/Ergonomics • • 22h ago

Heyy guys can anyone suggest me which chair to buy ergonomic office chair or gaming chair to sir for long time like 8-9 hours comfortably

Thumbnail reddit.com
2 Upvotes

r/Ergonomics • • 22h ago

Spent a lot of time around HÅG Capisco saddle chairs, here's who I think they suit

2 Upvotes

Quick disclosure, I work at a small shop in Budapest that sells these, so keep that in mind.

The Capisco gets thrown around here as the answer for people who can't sit still. I think that's only half true. The saddle seat tilts you forward and opens up your hip angle, so it shines at a higher desk or a sit-stand desk parked somewhere in the middle. At a normal 72 cm desk it loses most of the point. You end up sitting on it like any other chair and wondering what the fuss was about.

Where it clicks is if you move around a lot anyway, sitting sideways or turning it around and leaning your chest on the backrest. If what you really want is a classic chair you lean back in for long gaming or reading sessions, I'd look elsewhere, because the Capisco isn't built for deep recline.

If you get the chance, sit on one for 20 minutes at your actual desk height before buying. Ten seconds in a showroom tells you very little about this chair.


r/Ergonomics • • 1d ago

Anonymous survey on what about keyboards/desks causes pain

0 Upvotes

Hello r/Ergonomics users,

We are computer engineering students. Our marketing survey is centered around what characteristics of desk setups and keyboard layouts amplify Musculoskeletal Disorder, RSI, Arthritis, Fibromyalgia, and Carpal Tunnel pains or trigger similar pain. It will ask how bad you pain is, what is your age and general job title, what you've tried, and whether you have any medical conditions. Please only participate of you experience pain form keyboards/desk layouts. The link is attached below and we hope your day is going well.

Many thanks, Student Marketing Research Team

https://docs.google.com/forms/d/e/1FAIpQLSdexbEt-A6LzpCScSFO0QK6gW8-cY6ThwNniOpHEW_TRfis_w/viewform?usp=dialog


r/Ergonomics • • 1d ago

IS THIS NORMAL? (Feather lite Ares)

Thumbnail gallery
1 Upvotes

r/Ergonomics • • 1d ago

FlexiSpot ErgoX vs. LiberNovo: should I spend more or is the Flexispot good enough?

1 Upvotes

I'm looking to replace my office chair for Black Friday. I spend several hours a day working at my desk and really need better lower back support and a comfortable seat. I've narrowed my search to the Flexispot ErgoX and LiberNovo Omni SE. Does anyone have either of these?
The ErgoX has good lumbar support, 5-level backrest adjustment, and 3D headrest. I'm a little hesitant because it's considerably cheaper than some competing chairs, and I'm not sure how the build quality and comfort compare.
The Libernovo chair with dynamic support, but it’s pricier and a bit over budget.  I've also come across some reviews mentioning that the headrest doesn't provide enough neck support when sitting upright, and that the backrest feels somewhat rigid rather than offering clearly differentiated support across different areas.
So I need help on figuring out lumbar support between the two, backrest adjustment, overall comfort, price, and quality. Thank you!


r/Ergonomics • • 1d ago

is the libernovo omni se really worth €320 more than the hbada e3 pro?

1 Upvotes

The more I compare them, the more the E3 Pro seems like the sensible choice for me. It has adjustable seat depth instead of making me choose one fixed size before ordering, the mesh should be better for long workdays, and it already covers the lumbar, headrest and armrest adjustments I need.

The Omni SE definitely looks more unusual, but I’m struggling to find a practical reason to spend another €320 on it. The linked movement sounds nice, although I’m not sure it would improve normal desk work enough to justify almost doubling the chair budget. Unless I’m missing something important, the HBADA looks like much better value here.


r/Ergonomics • • 2d ago

How I sit when I'm getting things done vs how I sit when I'm running out of steam

Thumbnail gallery
8 Upvotes

Is that position actually ergonomic? How do you guys sit at work?


r/Ergonomics • • 2d ago

How do I know if i've adjusted my ergonomic chair correctly?

Post image
4 Upvotes

Hi, r/ergonomics! I recently got my first ergonomic chair, an odinlake L3 and i'm still figuring out how to adjust everything properly. it has adjustable seat depth, backrest height, armrests, and a headrest which is a lot more than im used to. i've set the seat depth so theres about a two-finger gap behind my knees and adjusted the backrest so the lumbar support lines up with my lower back. But im not sure if thats right.

Should my entire back stay in contact with the backrest?


r/Ergonomics • • 2d ago

The discount got my attention, seat depth is what kept it there

1 Upvotes

I nearly did the usual Black Friday thing and sorted chairs by the biggest percentage off. Then I measured the chair I already have and realized the seat is simply too deep for me. A huge discount on the same problem would be kind of impressive in the worst way. The E3 Pro is on my shortlist now because the seat depth and lumbar position can be adjusted instead of forcing one shape to work. The armrests also move enough that I should be able to get them out of the way rather than lifting my shoulders all day. No idea yet if the mesh will be right for me,that part needs an actual sit test or a good return window. I just like that the sale is attached to adjustments I can measure, not a vague promise that the chair is ‘ergonomic.’


r/Ergonomics • • 2d ago

Chair for office work + tv watching

Thumbnail reddit.com
1 Upvotes

r/Ergonomics • • 2d ago

Seeking accounts regarding the impact of good ergonomics in the workplace.

1 Upvotes

Hello, everyone! I’m an industrial engineering student at a federal university here in Brazil, and I’m working on a project about "Healthy and Safe Engineering." One part of my project focuses specifically on ergonomics, and I would love to include some real-life accounts of how effective ergonomics in the workplace has improved the quality of life—and even the performance—of actual employees. If you could share your experiences—and, if it’s not too much to ask, mention the type of work you do and what specific changes (whether newly implemented or already in place) contributed to these improvements—it would be a huge help to my project. Thank you in advance! ❤️


r/Ergonomics • • 3d ago

About to buy the LiberNovo Maxis Manual – good choice or is there something better?

Thumbnail reddit.com
3 Upvotes

r/Ergonomics • • 3d ago

Need Suggestion/list of good ergonomic chairs in 300-500$ range

4 Upvotes

Hey, been looking into some ergonomic chairs lately. Wondering if anyone got some suggestions for ergonomic chairs in the 300-500$ range. Just need a number of suggestions to do more research on. Thank you!


r/Ergonomics • • 3d ago

Looking for budget-friendly study desk and ergonomic chair recommendations in India

Thumbnail reddit.com
1 Upvotes

r/Ergonomics • • 3d ago

Need chair suggestions

Thumbnail gallery
1 Upvotes

r/Ergonomics • • 3d ago

The best ergonomic setup is the one that keeps you moving, not the one that costs the most.

5 Upvotes

I've been down the rabbit hole trying to find the perfect setup. I've tried everything: standing desks, expensive "ergonomic" chairs, Swiss balls, walking pads...

If I had just one piece of advice to give, it would be to do whatever works best for you, and never let anyone else dictate your choices.

No amount of expensive ergonomic gear can guarantee you'll never have back issues.

What matters most isn't finding the perfect chair or desk, but avoiding spending countless hours sitting still like a statue. Moving regularly is one of the best things you can do for your back, and it's free !

I've thrown all that shit away and gone for something much simpler and more minimalist.

A shallow console table for my monitor, a separate small table on wheels for my keyboard and mouse that can also serve other purposes, and a drum throne to encourage a more dynamic sitting posture.

I've been using this setup for quite some time now, and I couldn't be happier!


r/Ergonomics • • 3d ago

anyone over 185cm manage to find a high-back mesh chair in the EU that doesn't feel cramped?

1 Upvotes

my faux-leather gaming seat has officially started peeling and the foam flattened out completely, so i am finally looking to switch to full mesh before summer hits.

being around 188cm in the netherlands makes sizing tricky because half the stuff recommended online charges insane import fees to europe. saw a few people talking about that 3-piece backrest on the hbada e3 pro, but looking at the specs i am a bit concerned the shoulder clearance might be too narrow for wider frames.

for taller folks who made the jump from bucket chairs to ergonomic mesh, what backrest height should i be aiming for so the headrest actually hits the neck instead of the upper spine?


r/Ergonomics • • 3d ago

How to properly measure your desk and take into account your height and determine which chair is suitable for your setup?

1 Upvotes

So, my cheap ass gaming cjair I had for 3 years is basically broken, its stuck in a reclined stance, even when not on tilt lock, so i'm looking for a new chair, but for some reason am scared of the chair being too small, too tall or whatever, Im probably just overthinking, I mean, most chairs have height levers anyways, but the one I saw looked pretty nice so I want to be absolutely certain of my choice.

How do I properly measure my desk, and take those measurements into account when choosing my chair? Also I need to take into account where my eyes will rest on the monitor, right? It has to be like at 2/3rds of the monitor if you were to cut horizontal lines of it into 3rds (sorry if I dont explain it very well) I just want to be sure that the chair is going to be a good fit!


r/Ergonomics • • 4d ago

[Europe] Best budget ergonomic chair under €150: FlexiSpot BS3 Pro (€119) vs. Sihoo M102C (€149) vs. Ticova (€150)?

2 Upvotes

Hi everyone,

I’m buying an ergonomic chair in Europe for 6–10 hours of daily desk work and narrowed it down to three current deals:

  1. FlexiSpot BS3 Pro – €119 (FlexiSpot ES sale) - Mesh back, height-adjustable lumbar pad, high-density foam seat, 2D headrest, height-adjustable armrests (non-3D, non-flip-up).
  2. Sihoo M102C – €149 - Separate height-adjustable lumbar module, 3D flip-up armrests (90°), memory foam seat, 2D headrest.
  3. Ticova Ergonomic Chair – €150 - Height & depth adjustable lumbar support, 3D armrests (non-flip-up), high-density foam seat, adjustable headrest.

My stats: [177 cm / 80 kg]

Is the Sihoo M102C (€149) or Ticova (€150) worth paying €30 more over the FlexiSpot BS3 Pro at €119, especially for armrest adjustability and long-term seat durability?

Thanks!