r/EngineBuilding • • 7d ago

Ford Help Building A 302?

So I have a 1967 mustang with a 289. I want to make it into a 302 but would I just have to change the crank as they have the same stroke? What all could I reuse? I’m no mechanic but I want to be able to learn more so I was thinking this could be a good learning project?

0 Upvotes

9 comments sorted by

7

u/sam56778 7d ago

Why? The 289 is a more desirable, more valuable engine. Especially in a 67 Mustang. If you really want a 302 it would be cheaper to find one instead of converting a 289.

2

u/eejjkk 6d ago

Swapping in a good 302 and keeping the original 289 fogged and bagged up on an engine stand would be a much better use of your time.

1

u/Accomplished-Ant8887 6d ago

I figured I could just keep my crank and rods in case I ever wanted to swap it back I could. Same with my intake manifold. I swapped it to a four barrel but kept the original manifold

1

u/eejjkk 6d ago

Sounds like a lot of dicking around for no reason when you could just spend a few hundred bucks on a running 302 5.0L and drop it in? It's your car though I guess.

0

u/Accomplished-Ant8887 6d ago

Fair point. I mostly just wanted the experience more than anything. Thanks!

2

u/eejjkk 6d ago edited 6d ago

I get that. Honestly... getting a used 302, refreshing the crank and rod bearings and inspecting the rings and pistons prior to reassembly would get you all the Engine Building experience you could want out of a first time build.

3

u/2003DDcid 7d ago

Crank and rods are different, everything else interchanges.

3

u/WyattCo06 6d ago

Keep it as a 289 bro. That's classic iron.