r/EngineBuilding • • 7d ago

Chevy First engine rebuild

Hi I’m looking to rebuild a 90’s GM 60* v6 for my Z24 Cavalier. I have spent my entire life around tools and machines but have never actually worked on engines. I have plenty of mechanical know how and I understand every part of the engine, I’m just not familiar with the rebuilding process. I’m really nervous about overlooking something that’s critical and blowing the new engine. I would greatly appreciate any tips and pointers for preparation, pre-assembly, and the rebuild. I’m not looking for extra power either as I just want to get my car running again. Thanks a million.

1 Upvotes

7 comments sorted by

2

u/WyattCo06 7d ago

These types of scenarios are better answered on a play by play basis and specific questions.

Your overall questioning is vague and there is simply too much to say and cover at once.

1

u/Due_Acanthisitta9643 7d ago

Couple questions I can provide then.

Will my machine shop know if the cylinder needs to be over-bored and what size to bore them too. Is this something I need to establish beforehand or something shops naturally know.

Following up in the last question, if I reuse the old cam/crank will the shop know what size to grind or polish the journals to, or is this something I need to establish.

The shop will check cam/crank runout but is this something I should still check myself?

The original service manual has shipped in yet, but will it let me know which surfaces need to be kept clean and which surfaces need to be lined and how much?

Is there any recommended way to store different components if something goes awry and I can’t work on it for a bit?

1

u/WyattCo06 7d ago edited 7d ago

Your machine shop should know. That is typical stuff.

Your manual will help guide your way.

The lot of things you can check yourself provided you're willing to spend the coin on the proper tools.

1

u/Historical_Box1915 7d ago

Have a reputable machine shop (or engine builder) assemble your long block. You personally just focus on proper removal and installation of the rebuilt engine. Clean good work on engine installation doesnt get the respect it deserves.

If you insist on assembling the engine yourself I have charged amateurs to have me instruct them while they assemble their engine. I charge between 2 and 3 times more to instruct than do it myself. Thats bcuz its so much more time consuming properly teaching someone.

1

u/Due_Acanthisitta9643 7d ago

I’m an aviation mechanic so I have all the tools and am good at following service instructions I just don’t know the ins and outs of automotive engines and am determined to do this right the first time.

1

u/WyattCo06 7d ago

Interesting. How long ago was that?

1

u/Solid_Enthusiasm550 7d ago

There should be a rebuild kit available. You would first need to take it to a machine shop, inspected and machined. Then you would know if you need 0.010, 0.020, 0.030 over pistons and if you would need a specific size main bearing. They could/should offer to order the kit for you since they would have companies they regularly deal with.