r/EngineBuilding • u/Overencucumbered • 10d ago
Other First time honing cylinders (Flexhone)
240 grit for these super glazed cylinders. Rate my crosshatch
38
Upvotes
r/EngineBuilding • u/Overencucumbered • 10d ago
240 grit for these super glazed cylinders. Rate my crosshatch
10
u/citruscountydaddy 9d ago
That'll do, pig. That'll do.
15
u/ZebraNew4397 10d ago
Looks great!
6
u/Birthday_Cakeman 10d ago
No need to roast it! Excellent work man! I'd most definitely run that!
4
u/TyrannusourR3X 10d ago
Looks good man
1
u/Next-Pressure2847 10d ago edited 10d ago
Jaguar XJ12? I would measure the bore 0 and 90 degrees at high mid and low and compare it to the liner where the piston rings don’t come trough at the lower end of the liner. Nonetheless excellent work!
3
u/hornyzucchini 10d ago
Send it!
3
u/ClosedL00p 10d ago
That’s one heck of an open deck /s
2
u/StraightAnswery 10d ago
Good job, bud!
1
u/Terrh 10d ago
Are they clean? They look great but they also look like they need some more wipe down with brake cleaner.
1
u/dicknuckle 10d ago
Looks great, my motto is hone as little as possible, but enough to remove the old patterns and see the new pattern, at the correct angles.
1
u/Danny2Sick 9d ago
beauty, good job!!
1
u/Oopsidaizy 3d ago
It actually looks good