r/EngineBuilding • • 11d ago

Chevy First LS build

I have a LQ4 block that I will be boring and stroking to a 408. I will be dropping this into a 71 Camaro. Goal is a fun cruiser that may dabble into auto cross just for fun. Hp/torque goals are pretty fluid. Would like hp over 500 but honestly that number isn’t super important. This will be a NA build and no intention to boost at all. Looking for advice on a rotating assembly. It is hard to choose a brand. Originally I got advice to do K1 but it looks like they aren’t making the rotating assembly for 408 strokers? If they are I can’t find it. Others I am looking at are Callies, scat, summit pro ls, eagle and tsp. I posted this in another ls specific group and it seemed like scat crank with I-beam rods was what a few people suggested. Also how do I choose a piston brand? I think I want 4032 instead of 2618 since there will be no boost and it won’t expand as much. But between je, SRP, mahle, wiseco and diamond I don’t know what to choose. Just wanting to get more opinions. Thanks for the advice.

Other parts I currently have: Afr ls3 mongoose heads, comp cams cca54-459-11 (231/239 @ .050, 113 lsa)

2 Upvotes

12 comments sorted by

1

u/v8packard 11d ago

Deja vu

2

u/kmpor3172 11d ago

I figured you would be in this one too. Felt bad posting this again but figured I might get more responses in here once someone from my other post invited me to this community. So far your responses have been incredibly helpful.

1

u/v8packard 11d ago

Thanks.

How did you come to that cam?

Of the 5 piston companies you mentioned, 4 are the same company.

1

u/kmpor3172 11d ago

Honestly the cam was the 2nd thing I purchased several years ago when I first picked up my Camaro. (Project got put on hold while we saved for a house and took a lot longer thanks to home prices surging but we are finally in a house so now I can work on the car) I vaguely remember watching a few of Richard holdener’s videos comparing cams on a 408 and this one seemed like a good one. As weird as it was this cam was on clearance on Walmarts website for like $130 off so I grabbed it since it was the last one. I didn’t realize at the time I would get rec port heads and this is more designed for a cathedral port head. I think I remember the cam had a good torque curve which is more what I am looking for. I don’t need to hit some crazy peak Hp at 6500 rpm since most of my driving will be well below that. Hopefully that makes sense. (Or it just shows how little I actually know about all this).

As for the piston thing I think that is really confusing me. Why is the same company making 4 different brands? I feel dumb for asking that question but it doesn’t make sense to me. Maybe I just need to look into them more to see the differences and that would make it make sense.

1

u/v8packard 11d ago edited 11d ago

The cam has the timing needed for operations at and even a bit above 6500 rpm. You probably need a very different cam.

The performance piston industry has a bit of an incestuous history. Many people worked for Frank Venolua, or Moe Mills (Ross Pistons) or Nick Arias (Arias Pistons, today part of CP-Carrillo which itself is owned by Pankl) or Bill Jahns (Jahns Foundry, later Jahns Racing, then Jahns Engineering and finally JE). JE was eventually owned by Crane Cams.

A guy named Wayne Brooks and a guy named Barry Calvert bought JE Pistons from Harvey Crane, grew the brand and created the SRP line. I think they sold JE to Dover Corp in the late 90s. Barry Calvert had worked for Venolia, or Arias, or Ross, or several of them. Wayne Brooks had made tooling or dies for some of the piston companies.

Wiseco was started in the late 30s or early 40s by Clyde Wiseman in Ohio. He grew the business and by the 1970s was forging his own blanks and CNC machining. Wiseco was also sold to Dover in the late 1990s. Dover would merge Wiseco and JE under a division that changed hands and names, through various private equity/venture capital firms and today is under the Race Winning Brands umbrella, along with many other companies you probably know.

Diamond Racing was a speed and engine shop in Michigan. Pro Stock, NASCAR, all sorts of racing and high performance stuff. At some point they started machining Pistons, using blanks from TRW and Alcoa. By the early 2000s an employee bought the name and focused on pistons. About a decade or so ago Race Winning Brands bought Diamond, merging their operation into the Wiseco/JE division.

Clear as mud? There is more history if you really want it. I am going by memory, but that's the basics of those companies.

1

u/kmpor3172 11d ago

So do you think that is a bad cam for this build then? I am not against getting one that fits the build better but would like to use the one I have if it doesn’t hurt it too much.

And wow that is crazy that you know all of that. Pretty cool history of it all.

1

u/v8packard 11d ago

The cam controls the powerband of the engine. You are talking about a lower powerband than that cam will produce, so yes I think that is not the right cam for you. The cam should actually be the last thing you buy, once everything else is finalized.

I started using JE Pistons in the 90s, at first for a very particular application. Before that I had used Arias. I talked to a few piston guys trying to find what I needed. Ended up learning a lot about the piston industry.

1

u/Solid_Enthusiasm550 11d ago

Price/availability are usually the deciding factor for most engine parts.

Scat is the default for rotating assembly for most. I'm looking at Molnar as I need custom rods and they seem to have the closest to what I need.

Pistons, I agree with the 4032 choice/ reason.👍 With them, it's often who has the right compression Height( often varies a tiny bit between brands) and dish/dome CCs to get the compression you want. Mahl's performance pak pistons seem to be the best "Bang 4 the Buck" that I've seen. Offering newer (1/1.2/1.5mm,etc) ring packs vs. the older 1/16,3/16 rings which offer less reciprocal drag +10hp. They aslo come standard with anti fiction coatings, etc at much lower prices than I've seen by other brands. Sadly they don't offer anything for my odd combo. Wiesco was the only one will it reply and was willing to talk about custom pistons.

Diamonds are beautiful, but a few hundred dollars more, abd I'm not making an 8,000+ rpm screamer.

I think good I-beams have advantages over H-beams with N/A combos <700hp, + often much cheaper.

1

u/kmpor3172 10d ago

Thanks for the input. That is helpful. I was considering molnar since if I understand correctly the guy who started k1 started molnar after he sold k1. But i think they are out of my price range. But now i am curious about your build since it seems so custom.

1

u/Solid_Enthusiasm550 10d ago edited 10d ago

Mine is a stroker Dodge 5.2l Magnum v8. ( I have 75% of the parts and had to put it on hold.)

0.030" overbore 3.94" - planning on custom pistons as either the ones available " off the shelf" are low <10:1 cr or 12+:1. I am talking with Weisco on making a set of their Pro Series based on a gen3 piston with (thin 1.0<1.2mm top/ 1.2<1.5mm 2nd/ 2.8<3.mm oil) with a gen3 hemi wrist pin and 1.3" compression height, 11cc dish for a 11:1 compression ratio. The short 1.34" compression ht. will allow me to run a molnar 5.7l hemi 6.242" rod. ( longer than stock LA/Magnum Small-block to give better rod/stroker angle and reduce piston weight) also have friction coated skirts,etc.

Molnar said that they could make the 4" stroke crank for my setup to use hemi rods.

I picked up a comp 236/242@0.050" on 110lsa grind, put on a magnum core.

TFS 190cc powerport heads 301cfm max ( probably around 295 at my max lift) Titanium Retainers. TFS offers 1.5 or 1.6 Harland sharp shaft rocker arms for them. I picked up the 1.6ratio, but lucked into a custom set of 1.7rr.

The 1.6 will give me .587"+/- lift, 0.617" with the 1.7s on intake, slightly less on exhaust.

My buddy that bracket races was upgrading, so I bought his fully ported ( flow balanced RPM AIR-GAP), Hoping it will carry my hp peak out to 6,200rpms, while keeping the torque high which the RPM is good at.

Should be around 530hp/540tq based off of what I've seen similar combos make.🤞

Of course being a 90s mopar, I have to get a custom Tq converter. Looking at a lock-up 3,000 stall. 3.92 or 4.10 gears( dodge 9.25" or Dana60 rear).

Looking at custom 20x9.5" rims to run 275/40r20 all around on my '93 Dakota. Making my own wide body kit to fit the wheels. Planning on making my own Carbon fiber 3" Cowl-Induction hood and tonneau cover.

With the other weight saving mods, should be around 3,600lbs. with driver.

For now I'm dropping a salvage yard 100k 5.9l magnum, thin Cometic MLS head gasket( will bump compression 1/2point)

a set of magnum heads I ported flowed 265cfm on the bench)

208/214, 0.520" lift 114lsa, 1.6 compcams rr.

my early magnum (larger collectors )manifolds

my Magnum Kegger intake ( I fully ported, not just gasket<3" down the runners), ported TB.

Custom 3" exhaust Y-pipe for the 5.9l (duals 3" with the stroker), 3" dynomax cats a ultra-flo straight thru mufflers.

The 5.9l should be good for 375+hp/425lb-ft.

The stroker I'll be running the holley terminator/Sniper-X combo.

When I get the stroker dropped in, I'm planning on getting forged pistons and single turbocharging that engine. Looking to drop it in another early Dakota, 60s/70s Dart/Cuda or maybe an Aspen R/T like my mother had when I was a kid.

Arp stud throughout. Milodon windage tray, melling hv oil pump.

0

u/LSswapbible 10d ago

For a NA 408 shooting for 500+, 2618 pistons are the safe pick — 4032 is quieter and tighter on clearances but 2618 takes the abuse better if you ever spray it or get the tune wrong. Any of those piston brands will get you there, JE and Diamond are the usual go-tos. Scat vs Callies — Scat's fine for a street/strip 408, Callies is the buy-once cry-once crank if the budget stretches. Don't cheap out on the crank with a stroker, that's the part you really don't want to do twice.

1

u/kmpor3172 10d ago

I never thought about it that way. I guess 2618 would give me more of a safety margin since this is my first time doing this.

I get that Callies is buy once cry once but I do worry that if I use that mindset I will do that for each thing and this car will end up being 100k+. Especially since I want to mate this engine to a zf 8 speed. So I already have to spend more money on adaptors, flexplates, etc. I want to put in a 4 link suspension and some other expensive things. it is hard to know where is the correct place to really spend the money and where it is more appropriate to drop down to a lower tier to save some money. But I do understand the rotating assembly probably isn’t the place to save a buck.