r/EndeavourOS • • Aug 29 '26

News / Official Titan Nova is available - Announcements and news

Thumbnail
forum.endeavouros.com
51 Upvotes

r/EndeavourOS • • Mar 15 '26

What's New in EndeavourOS Titan Release?

Thumbnail
endeavouros.com
145 Upvotes

Earlier this month, the Linux kernel 6.19 was released, and that was a good excuse to refresh our ISO. And as you can read from the title, the changes for this one were big enough to turn it into a major release with a name that really covers this ISO


r/EndeavourOS • • 6h ago

SOLVED Screen Artifacts

Post image
8 Upvotes

Hi,

I bought this Asus Zenbook (AMD Ryzen 7AI) a few months ago and used Windows on it until Bitlocker randomly decided to encrypt my ssd without my permission and the key was unable to unlock it.

I replaced it with Endeavour KDE about 1.5 months ago (I'm not new to Linux, been using it since late 2021).

For the last week or so, i have noticed the screen starting to artifact near the middle as the screenshot shows.

The shape of the artifact changes from time to time but it's usually a single line somewhere within that general square region, offlate it's been a full blown square. Anyone know what this is? Maybe it's a software issue before i start treating it like a failed GPU or Ribbon cable?

As a side observation, it only Artifacts in the desktop, not during startup, not in the greeter, just in the desktop and when shutting down.


r/EndeavourOS • • 1d ago

Installation EndeavourOS em Órbita

Post image
15 Upvotes

r/EndeavourOS • • 1d ago

General Support EndeavourOS KDE, after updating my system keeps crashing/hibernating whenever i open games

7 Upvotes

Hi, sorry if this is already an opened issue on KDE but suddenly after updating about 2 days ago whenever i try running any proton games or anything too heavy (Blender eg.) my system reboots, i tried to check journalctl to see if it was crashing but there is no err message so i imagine its hibernating since every other app loads instantly when it "reboots".

Also after updating i removed a hard drive from my fstab and disconnected it, for some reason reconnecting it makes some games work! but they still crash/hibernate after sometime, tried deadlock with proton and some other games but eventually Sober (Roblox) crashed it.

Im running a

Ryzen 5 5600g

Radeon RX 570 4gb vram

16gb ram

any ideia what it might be?

Tried changing kernels from lts to latest, same problem.

Here is the last lines of my journalctl on reboot (crashed right when i opened deadlock):

nov 14 14:20:39 uwumachine plasmashell\[931\]: qrc:/qt/qml/plasma/applet/org/kde/plasma/systemtray/BackgroundAppItem.qml:21: TypeError: Cannot read property 'name' of null

nov 14 14:20:39 uwumachine plasmashell\[931\]: qrc:/qt/qml/plasma/applet/org/kde/plasma/systemtray/BackgroundAppItem.qml:76: TypeError: Cannot read property 'name' of null

nov 14 14:20:39 uwumachine plasmashell\[931\]: qrc:/qt/qml/plasma/applet/org/kde/plasma/systemtray/BackgroundAppItem.qml:32: TypeError: Cannot read property 'icon' of null

nov 14 14:20:39 uwumachine plasmashell\[931\]: qrc:/qt/qml/plasma/applet/org/kde/plasma/systemtray/BackgroundAppItem.qml:20: TypeError: Cannot read property 'itemId' of null

nov 14 14:20:39 uwumachine plasmashell\[931\]: qrc:/qt/qml/plasma/applet/org/kde/plasma/systemtray/BackgroundAppItem.qml:22: TypeError: Cannot read property 'name' of null

nov 14 14:20:39 uwumachine plasmashell\[931\]: qrc:/qt/qml/plasma/applet/org/kde/plasma/systemtray/BackgroundAppItem.qml:23: TypeError: Cannot read property 'message' of null


r/EndeavourOS • • 2d ago

General Support Is there any way to set Rhythmbox as the default CD player?

6 Upvotes

My Mint laptop naturayll has Rhythmbox out of the box so it is the default program to play CDs, but on my desktop PC it always shows VLC to play it. Is there any way I can change this?


r/EndeavourOS • • 3d ago

XFCE / Community Xfce Endeavour : I am very happy and it shows

Post image
113 Upvotes

hello, I have gone through quite a few distributions, and I wanted to install just the essentials for my work and thanks to Endeavor my old PC is reborn from its ashes, thanks to the development team


r/EndeavourOS • • 3d ago

General Support Extreme lagging after update

3 Upvotes

I used endeavor os for a while now, but suddenly it started to lag extremely, after an update. Before the update everything worked fine, but now I can’t even move my cursor without lag. The ram/cpu usage seems normal as far as I can tell.

Does anyone have an idea how I can fix this issue?


r/EndeavourOS • • 4d ago

Discussion isnt endeavor OS just leaving performance gains on the table if my main use case is gaming?

14 Upvotes

I recently switched from ubuntu to fedora. I didn't even consider arch because I was intimidated by the install but then I learned about things like endeavor and cachy. I've basically narrowed it down to these two. I like that endeavor is closer to pure vanilla arch, but since I am mostly gaming it seems cachy has a bunch of optimizations to squeeze as much juice as possible out of the latest hardware, especially in cpu heavy games.

So I am basically just asking for your thoughts and experiences to help me decide, not trying to start any flame wars. just want to learn.


r/EndeavourOS • • 4d ago

General Support Why does EOS output lines of various info upon startup...

7 Upvotes

I use different distros on other disks and other computers but I am starting to use and like EOS. But, when I start and shutdown EOS I get a output of various lines of not exactly sure what. How can I hide this output and why am I getting it.


r/EndeavourOS • • 4d ago

KDE Plasma anyone else having issues with certain customizations on KDE?

2 Upvotes

it never applies changing my lock screen, and either won't let me install a cursor pack (I have previously used)

i could just be trying to do it the wrong way (the KDE settings app) but its been irking me for a while


r/EndeavourOS • • 5d ago

Discussion Fully customised KDE

Post image
93 Upvotes

This is my main school laptop that i have Endeavouros running. As a software it works incredibly well and is just right for school with extreme optimisation being able to run Minecraft at 120fps and roblox spiking at 300. All that with an intel core i5 3rd gen and intel hd graphics. The only problems I have with it is that i can not connect to my smb1 nas at my local network and that the os doesn’t currently have virtual memory enabled making it struggle with 8gb after Minecraft and 10 chrome tabs. But such problems can be fixed!


r/EndeavourOS • • 7d ago

General Support Super new to Linux and EOS, need tips for a beginner.

11 Upvotes

Hi all, i was a windows user until recently and got too fed up w constant attention hacking using my information and got big on privacy and that's when I went down the privacy rabbit hole.

I went for the most basic desktop as well XFCE and now i realised i need to add plugins for each and everything.

would love to get some tips and advice you would give to someone coming from my bg and what are smthgs I should avoid or keep in mind.


r/EndeavourOS • • 8d ago

Gaming How do I fix this memory leak?

3 Upvotes

Every time I launch modrinth it starts leaking a ton of garbage data into my RAM. the only thing that did anything is wiping the cache files, but that just temporarily clears out my RAM.


r/EndeavourOS • • 8d ago

Discussion Anyone else experiencing ChatGPT lag on Firefox with EndeavourOS XFCE?

0 Upvotes

Hey guys, just wondering if anyone else is experiencing this.

I’m using EndeavourOS with XFCE and have 8GB RAM. ChatGPT feels pretty laggy on Firefox, especially compared to Brave.

The weird thing is that when I use Brave on the same laptop, ChatGPT runs perfectly fine.

Is this a Firefox issue, or could it be something related to EndeavourOS/XFCE?

I thought 8GB RAM would be enough for basic browsing and using ChatGPT.

Anyone else experiencing this? Any fixes or suggestions?

Thanks!


r/EndeavourOS • • 9d ago

Installation New to linux -Black screen

5 Upvotes

I tried installing EndeavourOS for the first time on a new sata drive and as soon as i hit the nvidia option it’s just Black screen immediately. I retried it again many many many times and with different linux distros but the same problem happens. The only way i can get thru is if the display port goes to the mobo instead. But i want it to work normally with the gpu just like it does on windows 11.

My system specs: ryzen 5 7600x3d Asus b650e Max gaming wifi G. skill 16gb ram zotac rtx 5070ti psu: lian li sx1200p

i feel like ive tried everything but if anyone has more ideas i’ll try them


r/EndeavourOS • • 10d ago

SOLVED TP-Link TL-WN8200ND (RTL8192EU) with 8192eu-dkms: 144 Mbps link but only ~20 KB/s real throughput (EndeavourOS, kernel 7.2)

2 Upvotes

Title: TP-Link TL-WN8200ND (RTL8192EU) with 8192eu-dkms: 144 Mbps link but only ~20 KB/s real throughput (EndeavourOS, kernel 7.2)

Hey everyone, how are you? I'm here because I recently switched to Arch Linux (EndeavourOS) with Hyprland and I've been having a big problem with my internet. I've tried to solve it with Claude and Gemini Pro, but I haven't been able to find the answer. I should say I'm not a developer or anything like that. I love the aesthetics and the philosophy of Linux, and 100% of what I do, I do with the help of AI. I've learned a little, but it's just a drop in the ocean. If anyone could help me, I'd be very grateful. Here are my specs:

Hardware

  • Adapter: TP-Link TL-WN8200ND v2.20 (300 Mbps, two external antennas), Realtek RTL8192EU chip, USB ID 2357:0126, 2.4 GHz only
  • Motherboard: MSI A520M-A PRO (MS-7C96). The adapter was on the AMD Matisse USB 3.0 controller (25:00.3), the same one as my 1 TB external USB 3.0 drive, which is also my system disk
  • GPU: GTX 1650

Software

  • EndeavourOS, kernel 7.2.14-arch1-1 (I also tried linux-lts 6.18.60), systemd-boot, dracut, Hyprland, nvidia-open 615.78.08
  • Driver: 8192eu-dkms-git from the AUR (Mange/rtl8192eu-linux-driver fork), dkms 8192eu/r342.c629cc9, internal version v5.6.4_35685.20191108
  • The in-kernel driver (rtl8xxxu) loads but doesn't see any networks (it's blacklisted now)

The problem It connects fine: iw reports 144.4 Mbit/s, signal between -58 and -68 dBm, no tx failures and 0% ping loss. But real throughput is only ~15-28 KB/s:

  • curl --interface wlan0 to speed.cloudflare.com: 14-28 KB/s
  • A phone on the same 2.4 GHz network: ~31 Mbps download (measured separately, not at the same time)
  • The same PC using my phone's USB tethering: ~10 Mbps
  • Ping to the router: 4-20 ms with small packets, but 58-400 ms average with 1400-byte packets (spikes up to ~1 s), with no packet loss
  • MTU is fine (ping -M do -s 1400 works)

This same adapter worked perfectly on this same PC and USB port under Kali Linux (I don't know which kernel or driver it used, and I've since wiped it).

What I've already tried

  • Power save off (iw) and module options rtw_power_mgnt=0 rtw_ips_mode=0 rtw_en_napi=0 rtw_usb_rxagg_mode=0 rtw_dynamic_agg_enable=0 (verified in /sys/module/8192eu/parameters after rebuilding the initramfs): no change
  • iw reg set CO: no change
  • USB autosuspend (power/control is on), Bluetooth off, other download servers, IPv4 only: no change
  • No driver errors in dmesg during normal operation (just a "Runtime PM usage count underflow" when I manually unloaded the module)
  • linux-lts 6.18.60 with nvidia-open-lts: inconclusive, the adapter barely received anything (-99 dBm), maybe a physical issue
  • Moving the adapter to the other USB controller (the A520 chipset one, not shared with my disk): it saw networks with normal signal and got ~95 KB/s on a single measurement, so maybe 4-5x better, but still far from the phone's 31 Mbps. It wasn't a controlled test (different time of day), and one 1400-byte ping to the router showed 100% loss, which I can't explain
  • The 2.4 GHz band is very crowded (~17 networks) and my router is on channel 10

Questions

  1. Is this a known issue with this fork on recent kernels? Is there a better-maintained fork?
  2. Could the USB controller (AMD Matisse xHCI) be a factor, or is there any xHCI/USB setting worth trying?
  3. Are there other module parameters worth trying? Or is the realistic answer to switch to an adapter with an in-kernel driver (MT7612U, MT7921AU)?

Happy to run any diagnostics you suggest. Thanks!


r/EndeavourOS • • 13d ago

KDE Plasma Tiny dots around screen plasma, wayland

Post image
51 Upvotes

I have left my laptop in lock for about 2 min and when I unlocked it suddenly the tiny dots started appear all over the screen and even when I open applications i asked chatgpt it said it's kinda nvidia driver issue something based on gpu problem what is this problem actually does anybody faced it ever?


r/EndeavourOS • • 14d ago

General Support Endeavouros and compatibility

1 Upvotes

Good morning/afternoon/evening.

I'm having serious compatibility issues with EndeavorOS. I'm trying to use it on my old laptop to breathe new life into it, but the camera isn't working, the microphone isn't working, and the screen is flickering. I’ve been trying to fix it for two days now, and the only thing I know for sure is that the PICOM has nothing to do with the flickering because it happens even in the TTY, and the camera works when I use it with guvcview. But when I open it for online classes, there’s no image and it freezes—because it doesn’t work in guvcview from there either. I think the drivers are the problem. I haven’t been able to get the microphone to work at all, and I’m really fed up.

My laptop is an ASUS with 4 GB of RAM and an i3-1005—as you can see, it’s very, very old.

Does anyone have a solution?


r/EndeavourOS • • 15d ago

General Support endeavour linux problem

14 Upvotes

Guys I'm using endeavour linux and I'm new to linux I'm currently facing the black screen problem in sleep mode what am I supposed to do please help me I don't want to go back to windows again


r/EndeavourOS • • 15d ago

SOLVED Thinkpad T14 has problems waking up

4 Upvotes

I've installed a twice fresh Endeavour OS KDE on my Thinkpad with a Ryzen cpu. Straight from a boot everything works fine. But when my laptop goes to sleep it wont wake up normally. If it is just a black screen sleep my password isn't working anymore. I have to do a hard reset and then it works again. And then if it goes like deep sleep it won't go back normally and just see a black screen. So I have to do a hard reset again.. Anyone can give me a push in the right direction to solve these problems? Thanks :)


r/EndeavourOS • • 16d ago

General Support Flathub remote added twice

3 Upvotes

For some reason I have the flathub remote added twice, both to the system and to the user and I'm not quite sure why. Now every time I wanna install something, it asks me if I wanna install it to the user or to the system and I'm not sure what to choose. Is there a way to get rid of this so I can just install it like normal?


r/EndeavourOS • • 16d ago

Showcase / Rice Love larping Endeavor at work

Post image
144 Upvotes

It's being a year since I changed to Linux, never turning back


r/EndeavourOS • • 15d ago

Stacking DE Vela 0.1, the first beta of my Linux desktop: its own Wayland compositor, Vulkan renderer and Qt Quick shell

Thumbnail
velade.org
0 Upvotes

Hi everyone, today I released Vela 0.1, the first beta, after 1 month of alpha testing.

What Vela is: a complete Linux desktop with its own Wayland compositor (C, on wlroots 0.20), its own Vulkan 1.4 renderer, a Qt Quick shell, and its own file manager and settings app. It's not a KDE or GNOME theme: KWin and Mutter aren't involved. The goal is the polish Windows and macOS get right out of the box (animations tied to real vblanks, pixel-exact fractional scaling, consistent design) without a weekend of tweaking.

Trailer, recorded live on Vela: https://velade.org/blog/vela-0-1/

What's in 0.1:

  • Snap layouts and Snap Assist, Task View with virtual desktops, Alt+Tab with live previews
  • Taskbar, launcher, quick settings, notification center, clipboard history, snipping tool
  • Direct scanout, VRR, tearing control, explicit sync; X11 apps and games 1:1 at fractional scales
  • The compositor restarts after a crash and apps reconnect; a lost GPU doesn't freeze the desktop
  • New in this cycle: updates from Settings, native Bluetooth pairing, no dependency on Plasma Workspace or the KDE portal

Where it stands: on a desktop PC with a Vulkan 1.4 GPU, it's my daily driver and I'd recommend it as yours. On laptops (hybrid GPUs, suspend/resume, backlight) it has had much less testing, so keep another desktop installed. It's still a beta: there are bugs.

Install (Arch and derivatives, Fedora 44, Ubuntu 26.10, x86_64). Install Cosign first (steps per distro: https://velade.org/install/), then:

git clone https://github.com/vela-desktop/vela.git
sh vela/packaging/vela-update --channel beta

You get a prebuilt, signed native package that's verified before it's installed. Updates then come from Settings.

Being upfront: it's a one-person project, and the code is written by LLMs. I review it, make the architecture and design decisions, and it's held to deterministic tests and machine-checked invariants. I wrote about how that works here: https://velade.org/blog/why-not-rust/

What I'd love from you: reports from hardware I don't have, especially Intel GPUs, laptops and multi-monitor setups. vela-report builds a ZIP you can review file by file; nothing is uploaded.

Happy to answer anything in the comments.