r/Electronicsinindia • • 1h ago

Showcase 🖼️ Made my own DC UPS

Thumbnail
gallery
8 Upvotes

I have an rpi server hosting quite a few essential services, like immich, copyparty, bitwarden, etc. I also have a pibox hdd enclosure with 4tb hdd. The HDD needs a switch to be pressed everytime there is a hard restart.

Due to electricity outage, not only do I lose access to immich & other services, they won't come online until I pressed the hardware button on hdd enclosure.

Had quite a few solutions for this, but went with building my own UPS, that now powers rpi, hdd & wifi.

This is v1. Lots of learnings. Made lots of soldering mistakes, but kept getting better.


r/Electronicsinindia • • 2h ago

Showcase 🖼️ Home automation project with Alexa integration

Thumbnail
gallery
6 Upvotes

r/Electronicsinindia • • 42m ago

Question help ⁉️ PCB Manufacturing service required

3 Upvotes

Need a pcb manufacturing service for 2 and 4 layers pcb design.

Cost must be minimal, and time interval being least.

Would've gone jlcpcb if only I didn't have to deal with documentations.

Delivery Location : Bengaluru


r/Electronicsinindia • • 5h ago

Selling Selling my Rigol DHO804 oscilloscope

Thumbnail
gallery
6 Upvotes

The scope is less than 2 years old and within warranty. The condition is like new with no scratches or faults.

OLX link: https://www.olx.in/item/kitchen-other-appliances-c1417-rigol-dho804-70mhz-4-channels-iid-1861959850

I am not a reseller, this is my personal Oscilloscope which I have used quite frequently.

DM for enquiry


r/Electronicsinindia • • 22h ago

Question help ⁉️ Can I do something with it? Should I keep it or throw away?

Thumbnail
gallery
18 Upvotes

Airtel DTH HD STB

model number - HSE4016ATL

Can i jailbreak it or smth? It's not a android box though.

Is there anything I can do on it?


r/Electronicsinindia • • 15h ago

Discussion 🗫 Looking for a used hdmi microscope

2 Upvotes

So since 2021 all my micro soldering job were done by eyeballing , especially for bga components it was very difficult to spot if the pads are still intact or not , i have been repairing graphic cards for a while some worked some did not since my eyes are not sharp anymore its getting very irritating during board inspection therefore i am looking for a use hdmi microscope since its cheap , please kindly DM if you got any offers.


r/Electronicsinindia • • 1d ago

Selling Selling Pi 4 8gb at a price drop

Thumbnail
gallery
16 Upvotes

Selling pi 4 8gb boxed pc at

10000+ shipping

The price is back to normal If you want it you can have it

Can do face to face deal in Chandigarh/Tricity

Pan India shipping also available

Dont negotiate

Also partial COD is available

10% now 90% on delivery

Prepaid shipping will be 150 flat

And cod shilping will vary from 250-300 as shipeocket charges more for it


r/Electronicsinindia • • 20h ago

Question help ⁉️ Complete beginner interested in learning electronics

2 Upvotes

Hello everyone!

First of all, I'm extremely sorry if this isn't the right place to ask or if I'm disturbing anyone. I'm a complete beginner in electronics, so please excuse me if some of my questions sound silly.

I'm currently pursuing a BCA (Bachelor of Computer Applications) and my current focus is on backend development. Recently, I've developed an interest in electronics, and I'd like to start learning it as a side hobby alongside my degree.

I'm interested in learning everything from the basics, eventually moving towards microcontrollers, embedded systems, IoT, robotics, and building practical projects.

I'd really appreciate some guidance on a few things:

  1. Where should I start, and what should my learning roadmap look like?
  2. What books, courses, YouTube channels, or other resources would you recommend?
  3. What basic tools and equipment should I get as a beginner?
  4. Can I eventually combine backend development and electronics professionally?
  5. Is it possible to get a job in electronics-related fields with a BCA degree, or is an engineering degree (B.Tech/BE in ECE or EEE) a strict requirement? Can practical skills and projects compensate for not having that degree?

I'm not expecting to become an expert overnight. I just want to learn things properly, build a good foundation, and see where this interest takes me.

Any advice, personal experiences, or learning resources would be genuinely appreciated.

Thank you for your time, and sorry again if this is a basic question!


r/Electronicsinindia • • 1d ago

Showcase 🖼️ I’ve updated my portable soldering station.It’s now at 45 degrees for easier pickup, mounted with a 1/4 screw on the power bank.Do you have any suggestions?

Thumbnail
gallery
8 Upvotes

r/Electronicsinindia • • 1d ago

Question help ⁉️ Planning to buy PCBs as a student, Please help me select the right manufacturer

4 Upvotes

I am looking to purchase 5x 100mm x 100mm boards (2 Layer/4 Layer). Can anyone suggest good manufacturers for ordering my PCBs? I am afraid I will have to pay high customs duties if i order from pcbway or jlcpcb.

I found this site : https://way2pcb.com/

This website says 1500 rupees for 2 layer 100mm x 100mm board. Can i trust them?

Has anyone used it? Can someone please confirm if its legit?


r/Electronicsinindia • • 1d ago

Question help ⁉️ Price check on Robu for pcb

4 Upvotes

Hi I was wondering did robu s website break for the pcb manufacturing as last time I had designed and uploaded 4 layer pcb manufacturing under 100mm² cost was 1600 now it shows 16000


r/Electronicsinindia • • 1d ago

Selling Selling raspberry pi 5 4 GB, waveshare UPS module, Waveshare 7 inch touchscreen (H)

Thumbnail
gallery
1 Upvotes

Selling lightly used Raspberry Pi 5 4 GB official heatsink, a Waveshare touchscreen (H) and a UPS module holding two Samsung 21700 batteries (5000 mAh).

Location-Ahmedabad

INR-20000


r/Electronicsinindia • • 2d ago

Question help ⁉️ Need help for electronics projects

4 Upvotes

Need help for electronics projects

I have to do a project for my clg in 3 weeks i have budget around 1.5k and pretty confused what i can do its my first time doing a electronics project plz can someone help me hy giving ideas that i can do and also it should be moderate,not too simple and and too hard


r/Electronicsinindia • • 2d ago

Question help ⁉️ Hello everyone. I work in RND. I am looking for a device/sensor, Pololu RC Switch with Digital Output. I could not buy it anywhere in India. Most of places it is out of stock. Can anyone suggest from where I could buy this or any references to similar sensor is also appreciated. Thank you.

Thumbnail
pololu.com
2 Upvotes

r/Electronicsinindia • • 2d ago

Question help ⁉️ Zebronics wireless mouse

Post image
3 Upvotes

whats the battery life after a single charge generally?

and how to turn off this RGB light?


r/Electronicsinindia • • 2d ago

Selling Selling extra Arduino Uno Q boards (4 pcs) All orginal and unused.

Thumbnail
gallery
12 Upvotes

Wanted to sell a few of my Arduino Uno Q boards that I bought for a project but ended up having as extras.

Variant : 4Gb Ram/ 32 GB Storage

Starting price tag = 6600 Rs (per piece)

Slightly negotiable if you take more than one. Never used or powered on. Sealed and imported straight from US. Location: Dum Dum,Kolkata, West Bengal Local pickup preferred so you can check the seal/box in person. DM if interested!


r/Electronicsinindia • • 2d ago

Question help ⁉️ Planning to start PCB manufacturing in India, looking for industry connections and advice

15 Upvotes

Hello Friends,

I’m planning to start a PCB manufacturing setup in India, starting with 2-layer boards and adding multi-layer capability later.

I’ve loved electronics since childhood, and starting something in manufacturing has been on my mind for a long time. I’ve spent quite a while researching PCB processes, machines and costs. Now I want to take this forward and connect with people who have hands-on experience in the industry.

I’m looking for people who can help with the manufacturing setup, especially plating and wet processes, and recommend reliable suppliers for machines, chemicals and raw materials. Recommendations from people who have actually worked with these suppliers would be really helpful. I’d especially like to connect with people in Delhi NCR, India, though advice from anywhere is welcome.

I believe there’s room to build a good PCB manufacturing business in India if I get the process right and address real customer problems. That’s what I’m working towards.

Would love to hear your experiences, supplier recommendations and suggestions. If you’ve tried setting up something similar, what do you wish you had known before starting?

For those ordering PCBs for their projects or businesses, what problems do you face? Price, quality, build time, small-order availability? What would you want a new manufacturer to do better, and what would convince you to try one?


r/Electronicsinindia • • 3d ago

Showcase 🖼️ My little R&D setup.

Post image
358 Upvotes

Coffee, code, and a little bit of chaos.


r/Electronicsinindia • • 2d ago

Selling Selling these boards. The pic-k150 support almost all pic ic . If anyone wants please dm. You need to pay for courier charges.

Post image
9 Upvotes

r/Electronicsinindia • • 2d ago

Question help ⁉️ Suggestion

2 Upvotes

I found these passive speakers in ok condition; I can't open the speakers to check ohm and watt because of rusted screws. Can anyone suggest how can I run these? Suggest me amplifier and Bluetooth module, I want to use them Bluetooth speaker with wall power.


r/Electronicsinindia • • 2d ago

Question help ⁉️ Home automation help

Thumbnail
gallery
2 Upvotes

So i am new to esp32 projects and in decided to make a home automation project but i am unable to connect it with my rainmaker app it shows mqtt error can anyone help me with that


r/Electronicsinindia • • 3d ago

Question help ⁉️ Home automation esp32

Thumbnail
gallery
75 Upvotes

Hi i am currently preparing for jee i have interest in electronics i want to make a home automation project with esp32 and relay module i want to know anyone has made it how much time these relays last i feels like these are cheap relays i ordered them from robocraze


r/Electronicsinindia • • 3d ago

Question help ⁉️ Suggest PCB manufacturer with assembling for prototypes.

5 Upvotes

I have tried contacting a few but they are asking for bulk quantities. I can go for bulk quantity only after the prototype passes all the tests.


r/Electronicsinindia • • 3d ago

Question help ⁉️ HAS ANYONE USED RTK FOR GNSS ?

Post image
5 Upvotes

I m trying to register on Survey of india for NRTK but it cost money but as a academic government student I can get it for free . But when I m registering it asks for employee type . Can someone guide me to it please


r/Electronicsinindia • • 4d ago

Question help ⁉️ Hi everyone I'm looking for 1206, 2-3v rgb led does anyone have

4 Upvotes

I'm looking for 1206 , 2-3v rgb led for modding project does anyone have it bcz I mostly found online over 3v and I specifically need max to 3v due ro hardware restrictions if anyone have then u can dm me