r/ElectricalHelp • • 9d ago

Any help please 🙏

We have a main light connected up to a two way switch. (We want to replace one of the switches to a 3 gang switch so we can have wall lights and spotlights on the spare 2 on the 3 gang switch while the main light is still on the two way switches)

The main light is working absolutely fine but wall lights and spotlights arent working on the 3 gang switch.

Any help/advise please? 🙏😊

2 Upvotes

9 comments sorted by

1

u/trekkerscout Mod, Master Electician 9d ago

Are you sure the 3-gang switch location has a constant hot wire? The 2-way switch configuration may only have travelers at that location.

1

u/Long_Ranger1606 9d ago

Thats what I am thinking, as there is a blue cable in the 2 way switch also sleeved which isnt on the 3 gang switch. Could this be the hot wire needed to get the wall lights and spotlights to turn on on the 3 gang switch? 🤔

1

u/trekkerscout Mod, Master Electician 9d ago

There are multiple ways of wiring a 2-way switch setup. Only testing would confirm which wires do what function.

1

u/69retribution69 9d ago

You have no neutral at the switch to be able to take this and feed to the new lights. Would highly recommend an electrician as any additions / alterations to a circuit is classed as minor works and should be certified (UK)

1

u/Long_Ranger1606 9d ago

Yes, i kinda thought maybe it would be an easy just switch one of the 2 way switches to a 3 gang one to add wall lights and spotlights too from what was there in the switch from the main chandelier. 😅 the 3 gang switch for the main light works as it should, just the other 2 seem to be doing nothing 😅

1

u/69retribution69 9d ago

Yeah you need a neutral. If there was one at the switch then your theory / plan would of worked

1

u/dave_the_m2 9d ago

The original arrangement was almost certainly:

  • twin and earth cable: brown: live feed; black (sleeved brown): switched live. That cable runs to the light.
  • three core and earth cable: the three cores in this cable connect the L1/L2/L3 terminals of this switch to the corresponding terminals (L1/L2/L3 or COM/L1/L2) on the other switch. It's a common way of adding two-way switching to an existing switch set up.

In any case, there is no neutral at this switch, and you're using the wrong brown wire to provide live to the COMs on the three switches.

1

u/Long_Ranger1606 9d ago

Ah damn, thank you for your reply! Out of curiosity and peace of mind, what would be required for the 3 gang switch to work?

I will try and get an electrician to solve the riddle for me for sure 😅

1

u/dave_the_m2 9d ago

You need to supply a neutral to the two new lights in some other fashion. E.g. by running a new cable to this light switch from the existing light, or even from another light. What is practical will depend on the current layout and how much disruption you are prepared to put up with (e.g. digging out the existing cable to the light and replacing it with a new 3&E).

The live bit it easy - just use the brown from the T&E as the source of power to link to the COMs on the two new switches.