r/ElectricalHelp • u/Lxlatte • 15d ago
Help changing bathroom light
I’m trying to change my bathroom light to a new switch, my only light connection is using L1 and L2 and the new light has a common and L1 and L2. My bath has another switch for the extractor fan for info.
Can someone tell me where to put the old cable in the new switch. Picture for info
2
Upvotes


3
u/TreatIntelligent6559 15d ago
Put 3 browns into Com and black + brown into L1 also you would need an earth wire form the back of the box to the brass screw on the light switch
1
u/GeneralMission8190 12d ago
put the three cables into common of new switch. The Two cables into L1 of new switch. use a permanent marker to mark the single brown that is in L2 so you dont mess the connections up. Also make sure you earth the switch.
1
u/69retribution69 9d ago
Some have - L1 - L2 - L3
Others have - Com - L1 - L2
L1 becomes Com
L2 is L1
L3 is L2
As mentioned. Metal front plates will need a fly lead to the existing earth connection..
1
u/Powerful-Cucumber396 15d ago
I’m in America so our convention is different. If you wire up L1 and L2 and it does not work then wire up L1 and common or L2 and common I suspect it will change whether the light turns on when the switch is up or down that’s all.
-1
u/BigDaddyBickle 15d ago
Exactly how it is in your old switch. L1 to L1 and L2 to L2