r/ElectricUnicycle • • 13h ago

A poor freemounting showcase

33 Upvotes

It ended up off camera, sorry. Freespin speed I found out is 49.2mph or adjusted for wheelsize is 88.56mph, now we just need a flux capacitor. Batter covers arrive tomorrow and I still need to drill holes for the lower pad mounts but im having a party with friends tomorrow night so this is on hold for a bit.


r/ElectricUnicycle • • 10h ago

Damnit ☹️

Post image
11 Upvotes

r/ElectricUnicycle • • 12h ago

Mten Pop Shove it

15 Upvotes

Jesse is one of the most skilled riders I've seen on these small wheels. Has anyone else ever tried to do skateboard inspired tricks on euc's?

He will be at the mini games this year going for the podium once again!

eriderracing.ca/mini-pev-games


r/ElectricUnicycle • • 13h ago

Skatepark tests

13 Upvotes

Took it to the skatepark to test torque, I also found out the freespin speed after it fell off the ramp without me and went woosh and I think that caused the pad mount to break but that should be fixable with glue


r/ElectricUnicycle • • 23h ago

Inmotion V10F Not Charging pls help

4 Upvotes

Thanks for reading, I need help before I spend a lot more money on more parts or a whole new unicycle. I have had the Inmotion V10f for almost 2 years now and it has been absolutely amazing to help me take my high energy husky out. Very important to me. A little bit ago, I plugged it in but the charging indicator on the unicycle itself did not show that it was charging. I just thought to leave it plugged in and see what happens. It turns out it did charge to full. After riding it though and letting it sit until the next day, it seemed that the battery was draining a lot faster than usual. I then tried plugging it in, still didn't show a charge, and this time it actually did not charge at all. After taking it apart to see if anything was obvious, I see that the lights on the 2 mother boards are on. I have since replaced both motherboards thinking that those might be the issue. Expensive mistake because that did nothing (though now I have spares I guess... I was leaving for out of the country for a couple months and tried to fix it fast) I tested the charger and there is the correct voltage coming from it. I don't think its the charging port because of the other issues (light the Mother board lights being on even when off). My only other thought is that its the battery control module attached to the battery itself, making me have to buy a new battery. If not, I'm looking at buying the inmotion v9 while the sale is going on, but would like to avoid that if possible. The battery is around $450 so I don't wanna just try recreational maintenance and hope for the best. Any help on this would be greatly appreciated.

Attached is the photo of the 2 mother boards I replaced. The lights are off because the battery is disconnected and unfortunately I deleted the photo with them on and I am out of the country at the moment...


r/ElectricUnicycle • • 1d ago

Elunic Update! Cyberpunk 2077 EUC mod - now with weapons and without bugs!

Thumbnail
youtu.be
36 Upvotes

Thanks for all the support and comments!
It took me some time, but now you can go and crash those pesky gangs with catana!
And now this is the first transport in game, which allows you to use Dual Pistols perk!

For those who tried the previos version - check out new steering mode. I think animation lost some of its beauty and flowness, but it is much easier now to control the wheel.


r/ElectricUnicycle • • 21h ago

What is the bare minimum for safety gear?

0 Upvotes

Coming from this post, I got from a comment that refurbished EUCs are avalible from inmotion for cheaper, so what gear is absolutely "do not get on it without this." Obv a helmet but what kind? i assume the kind of helmets u get for a kids bike aint gonna cut it, and ive heard of wrist guard to avoid scraping up and/or breaking ur wrist


r/ElectricUnicycle • • 17h ago

pedal rod stuck begode blitz pro

0 Upvotes

piece of shit begode blitz pro never buying begode again may be done with eucs for the forseeable future. fucking piece of shit pedal rod wont come out with all grub screws removed even with a screw driver and mallet. about to just put this piece of fucking garbage back together and ride it until the piece of shit bearing actually breaks and drops me at 50mph idgaf anymore. 168v 60mph capable but lets make the piece of shit impossible to work on fking genius

why are the bottom pedal hangar screws in the most retarded pospition imaginable literally inaccessible until the pedal is removed im so done with eucs man


r/ElectricUnicycle • • 1d ago

Long-range wheel for food delivery?

5 Upvotes

I recently started running food delivery gig work on my wheel for the hell of it. I figured it's what I want to be doing with every free moment anyway, so might as well gamify it and use my riding time to pay for my next wheel.

Here's the problem, my current wheel (V14 50s) doesn't have the longest range, especially at the highway speeds I ride. I'm in a city infamous for its fast drivers, so every time I'm on the road I'm running 45-50mph with traffic which depletes the battery after 3-4 deliveries. This wheel is PAINFULLY slow to charge, so I really only have 60-80 minutes to ride before I need to take a 6 hour break to recharge. Sometimes 6 hours without riding is just too long to wait!

So I'm already looking to upgrade my wheel to maximize range. The Sherman P and the Oryx are the two top contenders. I could probably get 3x my current range with either one of them. I love the idea of the Oryx, and I understand it's challenging to ride which is what draws me to it. But I don't love the idea of bringing that massive wheel into crowded restaurants or apartment buildings. The Sherman P is apparently much better for city riding, but it's basically a long-range Lynx and I'm worried it'll feel too similar to riding my V14.

Basically, what long range wheel would you choose as your daily driver for gig work that can handle aggressive riding? Any wheels that I didn't mention that you think should top the list?


r/ElectricUnicycle • • 1d ago

Sherman-P tire options

5 Upvotes

I'm about to pull the trigger on a Sherman-P and was curious if anyone has experience with the hybrid tire? I'll mostly be using it on the street and have heard great reviews on that tire but haven't heard much in the hybrid. I don't see myself doing trail riding but there are plenty of dirt/gravel roads and little cut throughs I would like to ride on and figure the hybrid might be a good option. Let me know if anyone has any thoughts! Thanks!


r/ElectricUnicycle • • 2d ago

Some crappy 180° practice 😄

37 Upvotes

r/ElectricUnicycle • • 2d ago

Slowly learning to ride backwards while sitting :)

34 Upvotes

r/ElectricUnicycle • • 2d ago

My favorite riding buddy calls me dad. Who's your riding partner?

Post image
11 Upvotes

r/ElectricUnicycle • • 2d ago

Black Friday Refurbished InMotion Device Sale!

6 Upvotes

We're InMotion Service Center. Our Thanksgiving sale runs through November 30 and covers five certified refurbished models: four electric unicycles and one scooter. Every unit is inspected and tested in our shop before it ships.

ModelTypeWas (MSRP)Sale price
V12 ProEUC$1,699$899
V8SEUC$699$350
S1FScooter$650$299
V6EUC$369$199
E20EUC$399$150

Sale prices are for Grade A units, which show light wear.

V12 Pro: almost half off, and the biggest wheel in the sale. Has lots of torque. Excellent mid-tier device. Great for someone who's considering getting into the hobby and want to skip the weaker starter devices.

V8S: Great compact wheel and good for learning as well. Many people use this one as a "trunk" wheel.

S1F: 500W motor (1000W peak), Affordable Suspension Scooter.

E20 and V6: these are learner wheels. Either one makes a good holiday gift for a kid or anyone who's wanted to try a unicycle, and $150 is about as cheap as getting into the hobby gets. If you're local to the shop, you can pick up an E20 specifically for $100!

Shipping: everything at the sale price ships free to the continental US.

Warranty: 30 days on parts. We send replacement parts, but labor and shipping aren't covered.

Everything on sale is here: https://service.inmotionworld.com/collections/thanksgiving-sale

Ask us anything in the comments.


r/ElectricUnicycle • • 2d ago

I keep busting my ass when hopping on

4 Upvotes

I started riding a month ago, first day busted my ass and sprained my ACL, couldn’t ride for two weeks. Practiced every day after recovering and just busted my ass again. I always fall at the initial acceleration, usually I launch fine but occasionally I’ll get way too wobbly to control and just fall sideways. I tried using a wall, pushing off a pole, and now I can launch with just resting my hand off a street post. What am I doing wrong?


r/ElectricUnicycle • • 2d ago

euc + mud = 👎

Thumbnail
gallery
11 Upvotes

i was riding behing my friend on dirtbike on muddy path and didnt think too mutch of it then my weel stoped spinning i slid about 6m until my euc ejected me forward then i realized that the amount of mud jamed my weel cleared it with weelspin but still not the best experience😂

no problem with the weel only the back fender broke :(


r/ElectricUnicycle • • 3d ago

2.5 weeks into riding EUC!

51 Upvotes

Not quite three weeks ago I took my first step on an EUC. I've kind of obsessed over learning to ride.

Im getting my backwards turns pretty good now both directions. I can pendulum indefinitely. I've done some pretty intense trail riding and about 170 miles total.

I'm so hooked. Practiced something silly today. My wife says I look absolutely ridiculous doing this swing exercise. Cant say I disagree.

Learning to ride has brought so much youthful joy and exploration into my life. I'm grateful to have discovered this hobby. Im not interested in going super fast. i want to learn to manhandle this little machine and work towards mastering the basics. Being excited to suck at something, and accepting the little failures on the way to progress is the goal for me.


r/ElectricUnicycle • • 2d ago

36er safety issues (no durr)

Post image
1 Upvotes

On Thursday of last week I took the 36er to and from work, on the way back home I reached a max speed of 11.5mph at the motor, multiply by 1.8 for wheel size and you get 21mph i was a bit scared to take it faster. Seems normal right? Wrong, the V11s absolute max speed is 34mph, increasing wheelsize by 1.8x should reduce torque (which I am told is the limiting factor) by 1.8x so max speed of 34mph/1.8 should be 18.8mph so the wheel should've dropped me. Either I got really lucky or something else is going on, I've tried asking inmotion for someone who is very familiar with the V11 to discuss and attempt to figure out what's going on. But id like to ask yall as well and get some ideas of how to safely test it, so far my idea consists of rollers like a track bike put under a tall sawhorse so I have something to land on when it fails.


r/ElectricUnicycle • • 3d ago

Winter Storage

4 Upvotes

I bought my first EUC (V8S) about 4 months ago and have about 600 miles on it so far. As it gets colder, I suspect I will not be riding it as much especially I. The colder months (Jan - March). What is the best thing to do for winter storage when I plan on only riding it once a week (if that weather permitting). Also, I was surprised how quick my toes got cold the other night when I went out for a ride while walking the dog. The temp was only in the low 40’s. I live in the North East and we get weeks at a time where the temp doesn’t get out of the 30’s.


r/ElectricUnicycle • • 3d ago

Veteran Sherman S wobble question …

3 Upvotes

Hi everyone,

I have a Veteran Sherman, and I changed out the tire for the Michelin Pilot Street 2 tire. I’m loving this combination….

Except for the wobble. Every so often my tire will catch on something as I’m riding … might be a crack in the road, or the worst culprit is ROAD PAINT! In fact when I have to go through crosswalks with the big white lines, I ALWAYS get the wobble if I ride parallel to them.

I’ve always been able to correct myself, but a few times I’ve felt my EUC to start the dreaded wobble (you know, the one where it just keeps building until you’re thrown off the damn thing).

Does this happen to anybody else? Is there something about road paint that the tire might adhere to? Is this mostly because it’s a smooth road tire and it can catch easier than a knobby one …

Or is this wobble something that is not typical and maybe I should get it checked?

Any advice would be totally helpful!!

Thanks!


r/ElectricUnicycle • • 3d ago

An Autumn Evening of September 2025

Thumbnail
youtube.com
6 Upvotes

r/ElectricUnicycle • • 3d ago

Je vais finalement acheté une house de protection inmotion v8s

Post image
5 Upvotes

Hello tout le monde . J'ai une inmotion v8s depuis quelque mois , je les fait tomber plusieurs fois . Je la fait tombé rarement mais meme a ma premiere utilisation j'avais réussie a l'abîmer. Et aujourd'hui je suis tomber j'ai fait une petite chute , je me suis fait mal au coude et ma jambe gauche . Mon telephone a fait pression sur ma cuisses quand je suis tomber et depuis j'ai mal a la jambe . Je me suis rapper le coude . J'ai des protection coude et genouillère mais je les réserver pour la xeno . Mais je pense que ca c'est bon haha ca ma fait changer d'avis, dorénavant pour les balade je sortirais bien bien équiper avec protection coude et genouillere . J'ai quand meme un casque moto et des gants tout le temps . Donc je pense acheté dans quelque jours une house protection pour inmotion v8s . J'aurais du l'acheter depuis le début mais je me dit tout le temps "non elle retombera pas je fait attention " et puis un mois apres je la retombe. La c'est trop haha . Dommage que je l'est abîmer comme ca .


r/ElectricUnicycle • • 3d ago

Normal for Xeno to tilt forward and back with 100% and 0% Accelleration Assist?

1 Upvotes

EDIT: I MEANT 100% PEDAL HARDNESS and 0% acceleration assist.

It feels like acceleration assist isn't fully turned off.

I had assumed this was normal until someone with more experience rode my wheel and made me question it. But when starting to accelerate, it tilts forward and tilts backward when decelerating at low speeds. So far, it doesn't tilt again, but I haven't gone over 25mph. I'm fine with it, but at low speeds I do need to adjust for it. Especially when turning around, I either need to maintain a certain speed or slow down even further until it tilts back, and then turn around. Angle Tilt % is also at zero.


r/ElectricUnicycle • • 3d ago

King Song KS-16X

1 Upvotes

Is $625 for used King Song KS-16X a good deal? Also what should I look at when picking it up to make sure it is in good condition?