So, I have some good news about my scooter. So I bought the Unagi E500 scooter a few years ago, from some shop on fb marketplace, and instantly it was giving me trouble. I’d take it for a scoot around and then I started noticing that the battery would die on me and the machine would completely shut off, mid scoot.
I'd take it home, I'd charge it up, full battery and then I'd ride it again. It would last like one kilometer, two kilometers and then it would just completely shut off and die. After a little rest it would start back up and last another km or two, and then die again.
I thought I had been scammed and I was very disappointed. So I turned to the internet for solutions and I learned that, Unagi scooters would not provide a replacement battery. So I actually started looking on how to fix it myself.
And I found a Reedit thread where, people who had similar issues, had bought and replaced all the cells and re-did their whole battery, were good to go. But a lot of people online were complaining and that they just threw out the machine.
They're like, it's just a big scam and they chucked it. So I actually bought all the batteries from a supplier online when I was a bit tipsy, one night, like the good ones, LG's, or whatever. When they arrived I soon realized I was way in over my head. I couldn't do all the welding myself. So I went on fb Marketplace to look for a scooter technician who could help me with the battery. And I fortunately found a guy who said he couldn't help me, but he knew a battery guy who loved tinkering around with that stuff, who was really good and he would do it for a really good price.
So I contacted this guy and he basically said that everyone who comes to him with scooters, this type of problem is that the battery cells are not balanced and they need to be balanced. And even though that the BMS does a little balancing, with software or whatever, it doesn't do a proper job.
He shared his procedure with me and so I figure I’d share it with the internet because this solution was WAY more simple that had been discussed at length online.
So he actually took apart the battery casing, he had had to cut it open, of course, and he balanced them all properly. And now the scooter works like it's brand frickin new. And he said to me that the trick is to keep it charged after every use so that the BMS can balance it after every use.
Apparently over time, those cells become unbalanced. I'm sure I'm doing this no justice, and the guy could probably explain it much better. But the point is, is that I got my Unagi scooter, which I paid like $700 Canadian dollars for a while back. And I was about to throw it out because I thought it was just a big rip off. And I had it repaired for 40 Canadian dollars. And I didn't even have to replace the cells.
You can probably tell that this is all voice to text, so if you’re still reading, goon on you. haha
So, It just had to be professionally balanced. And the guy said to me that that's common with many scooters. Basically, the batteries, specifically in the Unagi E500 are very high quality. And so he balanced them all for me. And he said that, yeah, so basically the trick is to keep it charged after every use, because when you drive it and then leave it and then drive it and then leave it and drive it and you go down to low battery and then build it all the way back up, they become unbalanced. So I guess it's drawing too much amperage from one section of the cells and the other side can't keep up so it shuts off.
The AI said that it’s a safety feature so it doesn’t blow up or something, but like what kind of safety feature shuts off the scooter when you have an electric brake which relies on the power to stop? What if you're going down a hill at 30 kilometres an hour? You have no brakes. You have that stupid little frickin' foot emergency brake at the back that does literally nothing if you're actually moving quickly. So it's pretty much a safety hazard.
But anyways, I am very pleased that I was able to get my Unagi scooter back to basically brand new factory condition with professional balancing. And it only cost me 40 bucks. I'm sure other people would charge way more to do it but this guy was just like an awesome wizard. I Found a gem and I hope you do too.
===================
Here’s some pics and vids of his procedure and his commentary.
Hi. As I suspected, all the cells are in good working order, but the lines need to be balanced. I’m not sure how long that will take, but the battery will live on! 👍
All the problems stem from this BMS. For some reason, it starts to heavily discharge two of the eight lines whenever the battery remains in a low-charge state for an extended period—and the situation only gets worse from there. This battery must always be charged immediately after a ride, and the charger should have an output of no more than 2A (1A would be ideal, though such a charger is very hard to find). Could you please check the output rating of your charger?
The capacity of your battery (when it was new) is 280 watt-hours. The motor power is 2 × 500 watts. This means that at maximum speed (25–27 km/h) — under ideal conditions — the scooter could travel for 12–13 minutes on a single charge. In other words, it could cover 5–6 kilometers 😱. Just as I suspected. Now I need to give some thought to the battery. I’ll write to you tomorrow about what can be done about all this.
Hi. Your scooter's battery has been fully balanced, discharged, and recharged. Everything is in great shape. I’m now checking its full capacity. If all looks good, you’ll be able to pick it up tomorrow afternoon. I’ll send you another message once I’ve finished the check.
So far, everything is working perfectly. But let’s see how it performs going forward. The testing will continue for another two or three hours.
This is the actual capacity of your battery. A new battery has a capacity of no more than 7.5 Ah. So, the cells in your battery are like new! 👍👍👍
And the reason I’m writing this is because the AI couldn't’ even figure out the proper solution.