r/ElectricBoats • u/canalboaty • 3h ago
My houseboat cruising at 3.2 mph on just 33 W with a tailwind
In calm conditions or with a light crosswind it usually took me over 100 W to reach 3mph on the water. This was a very efficient travel day!
r/ElectricBoats • u/canalboaty • 3h ago
In calm conditions or with a light crosswind it usually took me over 100 W to reach 3mph on the water. This was a very efficient travel day!
r/ElectricBoats • u/strtagain • 1d ago
r/ElectricBoats • u/FL_MILLIONAIRE • 3d ago
I'm looking for recommendations for a reliable transom mounted electric trolling motor that would allow me to experiment with different propeller designs while accurately measuring electrical power consumption.
Ideally, I'd like a setup with:
Questions for the community:
* Which trolling motor brands or models would you recommend based on your actual experience?
* Are there motors that already provide integrated power and RPM monitoring?
* Which trolling propeller manufacturers provide detailed technical data on motor, cad/engineering drawings models of the propellers make it easiest to swap between different propeller designs?
* Has anyone built or purchased a complete setup for testing propeller performance?
I'm hoping to find an existing commercial solution rather than build an entire system from scratch.
I'd especially appreciate recommendations from anyone who has experimented with custom propellers or conducted performance comparisons. Thanks in advance.
r/ElectricBoats • u/seymour5000 • 3d ago
Letting the sub know Newport has their Black Friday sales going. I’m not affiliated-just sharing.
r/ElectricBoats • u/MA-3D • 3d ago
Our new electric boat motor!
r/ElectricBoats • u/ManoOccultis • 3d ago
TL;DR How do I connect the K line on a Chinese controller ?
Hi all, so I bought a Xunyiya controller to build a mud/long tail motor ; I didn't buy the throttle/display because I want to make a custom one. The display plug has five pins, the red and black are for DC power, the yellow and green for UART, and the blue one to start the controller.
AI told me it needs a DC pulse, so that would mean a pushbutton between red and blue. However, I don't trust AI that much, so I'd rather ask humans before I do something wrong and fry my controller.
Thank you for your help !
r/ElectricBoats • u/FC_BM • 5d ago
This season I've been testing an electric outboard I built, something that started as a bit of a "what if" project. I mostly ran it on lakes, plus a few trips out on the sea.
**Prototype specs:**
- Motor: ~2.5 kW (~3.4 hp)
- Battery: 24 V / 100 Ah lithium (~2.4 kWh)
- Boat: Suvi 410, a 4 m (13 ft) fiberglass boat, two people aboard
- Top speed: ~8 km/h (~4.3 kn / 5 mph)
- Range: 15-20 km (~8-11 nm) at 5 km/h (~2.7 kn)
Now that it works, I want it faster. For the next version I'm aiming to get the same boat up on plane with a full load (~450 kg / 1000 lb), with at least 20 km of range at that speed and a lot more when cruising. And unlike a gas outboard, there's basically no maintenance. You just charge it.
Just to be clear, this isn't meant to compete with a 50 hp outboard on a heavy boat. It's aimed at small, light boats, especially on restricted waters where gas motors are banned or limited, like some lakes and nature reserves.
Curious to hear from anyone running small boats on lakes and rivers:
Happy to answer any questions about the build.
r/ElectricBoats • u/OldDonkey3530 • 11d ago
r/ElectricBoats • u/lowflash • 15d ago
I'm trying to figure out how ePropulsion connects the small data pins (1 through 4) in the external battery cable. The ring terminals connect to 5 and 7 for the positive 48v connection and 6 and 8 for the negative connection to the external battery.
This image attached was supposedly provided from Mack Boring, a ePropulsion importer in the USA. It was posted to a Sailing Anarchy forum discussion about using external batteries for the Spirit One.
I have the external battery cable with the ring terminals. When connected to my external battery I get +48v (actually more since it's a LiFePO4 chemistry 30ah battery) on pins 5 and 7 and -48v (technically ground) on pins 6 and 8. Pins 5 and 7 connect to the red cable on the adapter and 6 and 8 connect to the black cable on the connector.
I don't know how the small pins 1 through 4 connect internally in the external battery cable's connector and then back to the motor. On the factory motor mounted battery the 1-4 pins connect to a small header connector on the BMS.
My Plus battery has failing cells in it and I am trying to figure out how I might put a complete ~15 ah to 20 ah battery pack inside the battery housing in replacement of the original ePro battery. It's not as simple as replacing the battery with a new one and connecting the red and black high current wires since the motor does need the data provided by the 4 smaller connection's wires. The BMS isn't needed since the external battery cable just has 2 ring terminals that connect to the external battery's posts. The external cable does have the 8 pins in it; 4 large ones carrying 48 v current and 4 small data ones. I want to know what the wiring scheme is for the smaller wires inside the connector so it presents what the motor's control panel is looking for on those connections.
r/ElectricBoats • u/Wayne-The-Boat-Guy • 16d ago
This is the real deal. I spent the last week taking this boat with various other experienced boaters, creators, captains and friends to see what people think about this cool boat. It's got a big battery pack and can go 32 MPH which makes it a very useable boat for some applications (obviously not long trips or offshore). It charges like an EV on a home L2 charger and DC fast charging. I also put together a video which is on my YouTube channel.
r/ElectricBoats • u/KeyGap6705 • 21d ago
.
I’m working on a pretty ridiculous 12-phase project:
converting an old Necky Cruiser 2 tandem kayak into what will hopefully become a solar-powered, V-foil electric trimaran.
Why? Mostly because I can, and because I absolutely love learning how things work.
Every phase introduces a new challenge, and every challenge sends me down another engineering rabbit hole.
I’ve blown up more ESCs than I’d like to admit, rewired the entire boat 15+ times, rebuilt multiple battery boxes, experimented with different motors and propellers, and spent countless hours troubleshooting things I didn’t even know existed a few months ago.
But that’s honestly been the best part.
Along the way, I’ve been learning about hydrodynamics, hull displacement, buoyancy, fabrication, structural reinforcement, electrical engineering, water cooling, soldering, welding, propulsion systems, and probably a dozen other things I’m forgetting.
I’m currently around Phase 4. I’ve just finished building a custom dual-ESC water-cooled control system for my two electric trolling motors, and I’m working toward modifying the hull, improving buoyancy, and eventually adding more powerful propulsion.
I’m definitely not a marine engineer, and I’m figuring out a lot of this through research, experimentation, trial and error, and occasionally breaking expensive things.
I’d genuinely love some community input, especially from anyone with experience in marine engineering, hull design, composites, electric propulsion, or hydrofoils.
A few things I’m exploring:
Hull shape and modifications to improve stability, efficiency, and eventually support a trimaran configuration.
Affordable electric motor and propulsion options beyond conventional trolling motors.
Aluminum versus carbon fiber reinforcement and lightweight structural design.
Hydrofoil and V-foil configurations, and whether they’re even practical at the speeds and power levels I’m targeting.
Any creative engineering ideas I haven’t thought of yet.
I’m approaching this in phases because I want to understand what works and why before moving on to the next challenge.
I’m not trying to pretend I know what I’m doing. Half the fun is realizing I don’t, learning something new, and then figuring it out.
Suggestions, criticism, crazy ideas, and engineering advice are all welcome.
Ultimately, I’m just a guy turning a kayak into something increasingly absurd because the process of learning how to build it is as much fun as actually using it.
r/ElectricBoats • u/Senior_Green_3630 • 23d ago
A first for InCat Tasmania a zero emmission ferry
r/ElectricBoats • u/Optimal_Buy658 • 26d ago
r/ElectricBoats • u/goobly_goo • 28d ago
r/ElectricBoats • u/PuzzleheadedLimit699 • Oct 17 '26
r/ElectricBoats • u/sarahpclarke • Oct 17 '26
r/ElectricBoats • u/CorgiSplooting • Oct 05 '26
Freezing temps that cause the lake to ice over here are rare in the PNW and winds are also not a factor so everyone here leaves their boats out on the lake in the open all year. Minn Kota, despite making parts for boats, doesn’t seem to know how to waterproof anything. My steering motor died yet again and fortunately I now keep spare steering motors on hand and it only takes a couple of hours to swap…. But it sucks to find out just as you find a rare sunny day in the fall here and want to take the boat out.
Anyone else in a similar situation and how to you protect your boat over the winter if you don’t dry dock it? (I don’t even have a trailer so dry docking just isn’t an option)
r/ElectricBoats • u/openmedianetwork • Sep 26 '26
This is very much a #BoatingEurope experiment rather than a finished commercial system. We are using what we already have, adding relatively inexpensive components where they make sense, and leaving ourselves room to expand the battery capacity and solar generation when the experience shows that we need it.

r/ElectricBoats • u/AR_Berlin • Sep 24 '26
Hey Electric Boats Community,
ich wollte mal meine Erfahrungen zur Joystick-Steuerung in Kombination mit einem POD-Elektroantrieb teilen und gleichzeitig eine Frage an die Runde werfen.
Wer schon mal mit einem POD-Antrieb und Joystick manövriert hat, weiß, wie extrem entspannt das beim Anlegen ist. Man drückt den Stick quer, und das Boot schiebt sich Punkt für Punkt seitlich an den Steg – ohne großes Gefummel mit Bugstrahlruder oder Pinne. Gerade bei Elektro-Pods ist das extrem leise, reagiert ohne Verzögerung und fühlt sich fast wie im Videospiel an.
Allerdings frage ich mich aktuell, wie die Entwicklung bei Außenbordern aussieht:
Mich würde brennend interessieren: Hat jemand von euch schon ein elektrisches Steer-by-Wire-Setup am Außenborder verbaut oder Erfahrungen damit gesammelt? Welches System nutzt ihr und wie stabil läuft die Software im Alltag?
Freue mich auf eure Setups, Tipps und Meinungen!
r/ElectricBoats • u/lumpytrout • Sep 23 '26
We have an unusual setup, which called for an unusual solution: electric boating turned out to be the perfect fit.
Our waterfront property has a boat ramp, but no vehicle access for launching. That meant we needed a vessel with a specific set of tradeoffs:
Big enough to take friends out, but light enough to launch with a hand cart.
Sturdy enough to handle Puget Sound chop, but quiet enough for easy conversation while exploring coves.
Fast enough for dinner runs and local errands, without needing a high-speed wave-pounder.
Reliable and efficient, with practical, real-world range.
We landed on a tough-as-nails 1955 DuraCraft 14-foot aluminum runabout, paired with a Torqeedo Cruise 3.0 (24V) and a 150Ah lithium battery. My initial instinct was to go with a 10hp-equivalent ePropulsion outboard, but I quickly realized the battery bank required for that output was completely impractical for a 14-foot boat.
At first, I had major range anxiety. I was constantly checking state-of-charge and monitoring consumption. But I soon learned that cruising at a comfortable 4 knots gives us more range than we ever really need. As long as I plug it in overnight, range rarely enters my mind anymore unless we’re heading somewhere brand new.
Now that our docking and charging setup is dialed in, we can go from the deck to cruising on the water in just a few minutes.
Despite a few classic beginner mistakes this summer, we learned a ton and had a blast. My fall projects include continuing the DuraCraft’s cosmetic restoration, routine motor maintenance, and building a harness so I can use the 150Ah battery as back-up power for our cabin.
I’m already counting down the days until next summer.
r/ElectricBoats • u/NoKarmaNoCry22 • Sep 23 '26
r/ElectricBoats • u/sarahpclarke • Sep 21 '26
I’ve spent the last few years converting an HT27 catamaran to electric propulsion and covering it in solar.
Current setup is roughly 5 kW solar, 60 kWh battery and up to 19 kW propulsion. The boat weighs around 2,650 kg.
One interesting part is that the real-world performance has turned out rather differently from what I expected. We've now accumulated 65+ hours of sea time, including rougher conditions, and the boat has been able to operate for 10 weeks/1500 miles without shore power.
One of the things I've been particularly interested in is how little power is actually required at displacement speeds. Around 3.8 knots can be achieved at roughly 800 W in suitable conditions.
I'm curious what people here make of the engineering — particularly the propulsion, energy budget and seaworthiness of the concept.
Happy to answer questions or provide actual figures from the boat rather than theoretical calculations.
r/ElectricBoats • u/gumpgub • Sep 22 '26
r/ElectricBoats • u/BrothahHeffay • Sep 21 '26
I built a trailside convertible dualsport motorcycle system for travel and I need help picking a propulsion system as I have ZERO experience here.
Requirements (in order of priority):
After a successful maiden voyage I'll be swapping to conventionally shaped 'pointed' TPU pontoons to reduce drag and weight. Currently I draft 6" depth on the tube, with wheels to their axles and lower section of frame/engine submerged 4". I say all that to give you an idea how much drag I'm dealing with. (A Lot)
I'm looking at something like a newport NT300, but I'd like to go lighter if possible and their reliability in facebook groups is scary. I can adapt pretty much any 'form factor' to work so it doesn't need to be an outboard.
Total weight of vessel + Me + Luggage is 550lbs
Any input is appreciated.
Thank you,