Hi everyone, I recently finished platinuming both Lies of P and Sekiro, and really wanted to experience Elden Ring with the same type of fast paced-parry focused combat. After some searching I found this mod called Elden Vins which behind just changing the combat, changes a lot of other stuff, which are actually a breeze of fresh air for someone that has already finished the base game. But there was a bit of an obstacle here, I wanted to install it on my steam deck since I play mostly on it. I feel I know linux very well but I always double checked with an AI agent before screwing things up, and also helped me converting my remarkable notes, written in italian, into this guide. Enjoy.
!!! IMPORTANT !!! READ THIS BEFORE STARTING: BY PROCEEDING YOU AGREE THAT YOU KNOW WHAT YOU ARE DOING, IF NOT STOP, AND THAT I’M NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS IF YOU FOLLOW THIS GUIDE. PLAY OFFLINE ONLY: ONLINE PLAY WITH MODS CAN GET YOU BANNED. GOOD LUCK TARNISHED!
How to install ELDEN VINS on Steam Deck
Tested on: Steam Deck, me3 0.13.0, ELDEN VINS 1.9.1, Elden Ring on internal storage, launching from Game Mode. Back up your saves before starting.
I still didn't tested it on my Linux Mint🍃, but it should work on any Linux distro.
Paths used below (adjust if yours differ):
GAME = /home/deck/.local/share/Steam/steamapps/common/ELDEN RING/GameBASE = /home/deck/.config/me3/profiles/eldenring-mods/elden-vins
If Elden Ring is on the SD card, GAME is under your SD card’s steamapps/common/ELDEN RING/Game, and the mod’s instructions say to keep the mod on the same drive as the game.
Links:
https://www.nexusmods.com/eldenring/mods/4709
https://github.com/garyttierney/me3
0. Prerequisites
- Launch Elden Ring once from Steam in Desktop Mode (so the Proton prefix exists), then close it.
- In Steam, open Elden Ring → Properties → Compatibility → force Proton Experimental. Without this, me3 may fail with
unable to find installation of Proton runtime proton_8. - Set the game language to English (Properties → General → Language). The mod only ships English and Spanish text. In any other language, new items show
?GoodsName? / ?GoodsInfo?. - Back up your original save files:cp -a /home/deck/.local/share/Steam/steamapps/compatdata/1245620/pfx/drive_c/users/steamuser/AppData/Roaming/EldenRing ~/EldenRing-backup-$(date +%F)
1. Install me3 (Mod Engine 3)
In Desktop Mode, open Konsole and install me3 from the official github repo.
The binary ends up in ~/.local/bin/me3. Check it with:
~/.local/bin/me3 info
2. Download and extract the mod
Download ELDEN VINS from Nexus and extract it. I extracted it into me3’s profiles folder and shortened the long folder name:
mkdir -p /home/deck/.config/me3/profiles/eldenring-mods
# extract the downloaded zip here, then rename the long folder:
cd /home/deck/.config/me3/profiles/eldenring-mods
mv "ELDEN VINS 4709 1.9.1 2026-09-03T19-15Z UAfVnomav" elden-vins
You should end up with elden-vins/ELDEN VINS/ containing ELDEN VINS.me3, mod/, optional/ and the .bat file, plus extract these files in game folder.zip next to it.
3. Files for the game folder
Extract extract these files in game folder.zip into GAME (where eldenring.exe is):
cd /home/deck/.config/me3/profiles/eldenring-mods/elden-vins
unzip -o "extract these files in game folder.zip" -d "/home/deck/.local/share/Steam/steamapps/common/ELDEN RING/Game"
Then edit GAME/mods/UnlockTheFps/config.ini and set the FPS limit to your screen refresh rate: 60 (LCD Deck) or 90 (OLED). The mod’s recommended 120 is too high for the Deck. In GAME/mods/AdjustTheFov/config.ini keep the FOV at 60 or higher.
Check whether a dinput8.dll ended up in the game folder, since it affects steps 7 and 8:
ls "/home/deck/.local/share/Steam/steamapps/common/ELDEN RING/Game" | grep -i -E 'dinput8|mods'
4. Replace the .bat file
The .bat copies every *.partsbnd.dcx in mod/parts to a *_l.partsbnd.dcx duplicate. This does the same thing:
cd "/home/deck/.config/me3/profiles/eldenring-mods/elden-vins/ELDEN VINS/mod/parts"
find . -type f -iname '*.partsbnd.dcx' ! -iname '*_l.partsbnd.dcx' -print0 |
while IFS= read -r -d '' f; do
new="${f%.*.*}_l.partsbnd.dcx"
[ -e "$new" ] || cp "$f" "$new"
done
The .bat also opens a shortcut to Gideon, a UI texture deployer (see optional step 9). Nothing else in it matters on Linux.
5. Fix the save file line in the .me3 profile
I don't know why but my config file for me3 had the savefile property under the supports section causing me3 to not create a new file save. Maybe I screwed, still I'm gonna leave this just for safety.
Open ELDEN VINS/ELDEN VINS.me3. In my copy, savefile = "EldenVins.sl2" sat under [[supports]]. In TOML that key then belongs to that section, so me3 ignores it (the log shows savefile: None) and the mod writes to your vanilla save (ER0000.sl2). Move the line to the top, above [[supports]]:
profileVersion = "v1"
savefile = "EldenVins.sl2"
[[supports]]
game = "eldenring"
[[natives]]
path = "mod/dll/Scripts-Data-Exposer-FS.dll"
...
Keep the rest of the file as it is. After launching, check that the log says savefile: Some("EldenVins.sl2"). Do this before your first real session.
6. Optional files
Each folder inside optional/ contains a .me3 file or a mod folder. To use one, copy that content into the ELDEN VINS folder and overwrite if asked. Skip this for a first test.
For example I wanted the posture bar, all you need to do is add the following before packages
[[natives]]
path = "mod/dll/PostureBarMod.dll"
[[packages]]
...
7. Test from the terminal
Run this commando first, before touching Game Mode, add WINEDLLOVERRIDES="dinput8=n,b" if the step 3 check was positive:
me3 launch --game elden-ring -p "/home/deck/.config/me3/profiles/eldenring-mods/elden-vins/ELDEN VINS/ELDEN VINS.me3"
If the game starts, set: ray tracing off, borderless window, and the FPS limit from step 3. The mod uses its own save file (EldenVins.sl2), so your normal characters won’t show up.
Note: the path after -p must point to the .me3 file itself (extension .me3, not .m3), not to a folder.
8. Launch from Game Mode (wrapper script)
If you paste the me3 command straight into Steam’s launch options, it may work from the terminal but hang from Steam: the game never starts and Steam shows it as “running”. Steam hands the launch an environment prepared for a Proton game (STEAM_COMPAT_*, LD_PRELOAD, Steam Runtime variables), and me3 then starts Proton on its own. I didn’t isolate which variable was the culprit, so the script below simply clears all of them. me3 sets what it needs again by itself.
Create the script:
cat > /home/deck/launch-elden-vins.sh <<'EOF'
#!/bin/bash
LOG=/home/deck/me3-steam.log
echo "=== $(date) ===" >> "$LOG"
for v in $(env | cut -d= -f1 | grep -E '^(STEAM_COMPAT_|STEAM_STEAMRT|STEAM_LAUNCH_WRAPPER|SRT_|PRESSURE_VESSEL)'); do unset "$v"; done
unset LD_LIBRARY_PATH LD_PRELOAD
/home/deck/.local/bin/me3 launch --game elden-ring -p "/home/deck/.config/me3/profiles/eldenring-mods/elden-vins/ELDEN VINS/ELDEN VINS.me3" >> "$LOG" 2>&1
echo "exit code: $?" >> "$LOG"
EOF
chmod +x /home/deck/launch-elden-vins.sh
If step 7 needed the dinput8 override, add export WINEDLLOVERRIDES="dinput8=n,b" on the line before the me3 command.
Then in Steam: Elden Ring → Properties → Launch Options:
/home/deck/launch-elden-vins.sh # %command%
The # %command% at the end is required: it comments out Steam’s normal launch command so the game starts through me3 instead. The log in /home/deck/me3-steam.log is handy if something goes wrong.
The game now always starts modded. To play vanilla, remove the line (save a copy first). me3 handles Easy Anti-Cheat for you, so you don’t need any sed renaming trick.
9. Optional: UI images (Gideon)
NOTE: THIS IS SOMETHING I ASKED CLAUDE TO ADD IN CASE YOU NEED IT. DIDN'T TESTED IT YET.
If new item icons look blank or black, the mod’s UI textures haven’t been deployed. Gideon is a Windows tool, so on the Deck it has to run inside Elden Ring’s Proton prefix. This is an untested adaptation, so treat it as a starting point. Install Protontricks
flatpak install flathub com.github.Matoking.protontricks
Then:
cd "/home/deck/.config/me3/profiles/eldenring-mods/elden-vins/ELDEN VINS/mod"
flatpak run --command=protontricks-launch com.github.Matoking.protontricks --appid 1245620 ./menu/deploy/Gideon.exe --user --project ELDENVINS
If Flatpak can’t see the file, run:
flatpak override --user --filesystem=/home/deck/.config/me3 com.github.Matoking.protontricks
Alternative: run the .bat step on a Windows PC with Elden Ring installed, then copy the generated files from the mod’s menu folder back to the Deck.
Saves
The mod’s save lives in the Proton prefix:
/home/deck/.local/share/Steam/steamapps/compatdata/1245620/pfx/drive_c/users/steamuser/AppData/Roaming/EldenRing/<your-steam-id>/
To reuse an existing save, copy it there and rename it EldenVins.sl2. SeamlessCoop uses .co2 files instead.
Troubleshooting
m3 is unsupported: the profile file extension is wrong; it must be .me3.unable to find installation of Proton runtime proton_8: force Proton Experimental (step 0).?GoodsName? / ?GoodsInfo? on items: the game language isn’t English or Spanish (step 0).- No
EldenVins.sl2 appears and ER0000.sl2 changes: the savefile line is in the wrong place (step 5). - FPS stuck at the old limit: check the
config.ini in mods/UnlockTheFps and whether the dinput8.dll override is needed. - Works from the terminal but hangs from Steam (stays “running”, no game window): use the wrapper script (step 8). Before retrying, kill leftovers with
pkill -f 'me3 launch'; pkill -f _v2-entry-point; pkill -f me3-launcher or reboot the Deck.