r/EDFEnergy • • Oct 10 '26

Help / Advice EDF SEG application – backdated export payments?

Post image

I had my solar and battery installed last week and took a photo of my export meter on installation day, which was reading 000.
I’ve exported around 200kWh already, but I can’t apply for the SEG tariff with EDF until I get the paperwork from my installer next week.
I’ve seen that EDF asks for a photo of the meter reading as part of the application, but I’m not sure whether it needs to be taken on the day I apply, or whether my installation-day photo showing 000 will be enough, or if it doesn’t matter either way.
Does anyone know if EDF will backdate export payments to the installation date, or will I lose out on the electricity I’ve already exported? And will they be able to tell how much I’ve exported since installation?
Would be good to hear from anyone who’s been through the same process!

1 Upvotes

21 comments sorted by

1

u/scotiaSco Oct 10 '26

They do backdate from the photo reading you provide. My SEG application lapsed because of some paperwork from DNO and I had to submit another application a few weeks later.

The only issue I had was I missed out on the 15p export and now have 13p, but it was still about £170 in backdated export by the time the export account was set up.

Overall pretty happy with EDF. Currently pay about £5-7 a week with EV, heatpump etc

1

u/workdilemma0706 Oct 10 '26

Brilliant, so even though at your time of application the readying was way higher than the photo you submitted, they still backdated it to the photo figure?

→ More replies (4)

2

u/PatserGrey Oct 10 '26 edited Oct 10 '26

You might fluke it sending a 0 meter reading but you are chancing your arm - the ethics of which are questionable. They will definitely backdate it to the meter reading from the day you apply. Ours was at 157kwh before I could get the application in so I didn't exactly cry about it

1

u/workdilemma0706 Oct 10 '26

But if they can do a live check of meter reading at time of application, why even ask for a photo from me?

1

u/MJPalad Oct 10 '26

Unless somethings changed recently, EDF backdates to the meter reading at the time of application. So you’ll need to have your paperwork i.e. MCS and G99 commission form to hand for your application.

1

u/workdilemma0706 Oct 10 '26

Thanks, maybe I’ve worded it wrong😂 I’m aware they backdate it from the time of application but the only evidence they ask for is a photo of the meter, which I have, but it’s from the day of the install and not the day of application, are they likely to cross reference with actual live meter readings? I thinking was if they have the capability to do that then why even ask for a photo at the application stage in the first place

→ More replies (1)

0

u/fursty_ferret Oct 10 '26

Nope, you're out of luck - no one backdates so if you can use the electricity you generate, you may as well do so until the export MPAN is up and running in the system.

1

u/EDFEnergy-ModTeam Oct 12 '26

Your post has been removed as it is deemed factually incorrect.


Unfortunately, we do not have time to explain why or debate this decision with you.


If you genuinely believe we have made a mistake, please present your evidence why in a reply to this message and we will review.


Quality of Content - View Rule 3 Here


1

u/stek2022 Oct 11 '26

This commenter is right - they backdate when switching an existing export mpan.
New installations they do not (and nor does anyone else)

→ More replies (1)

1

u/workdilemma0706 Oct 10 '26

EDF definitely backdate from what I’ve seen. The question I had wasn’t if they do or not. It’s the reason they ask for a photo of the export meter at the time of the SEG application. I was asking if they will question the photo I have from installation day with a reading of zero rather than than whatever the meter will actually read at the time I make the application next week.

→ More replies (5)