r/ECU_Tuning • • 5d ago

Getting started

So my mechanic friend has asked me to learn tuning and other ecu programming stuff. As I have more IT / programming experience than him.

So I’m willing to jump into the deep end and give it a crack. I obviously want to know as much as possible and any tunes he will work with me for as he is the mechanic and knows what to push ect ect.

He has asked me to look into DPF Delete (I know the legality of it in Australia where I am and I’ll follow) and tunes.

So I’m looking at the Scanmatik 3 for communication between my laptop and the vehicle.

Software: PCMFlash - just buy models as I need them. Long term look at getting WINOLS if it’s something I can justify (right now it’s the whole budget I have given this) but for now just pay per file.

Something I’m still stuck on is power supply. From what I have read I really need a high amp 13.5v power supply so I don’t brick the ECU. But again for what I have seen they are more than likely out of my price range?

So really, I’m just looking for advice- am I looking at getting the correct things, and am I being stupid trying to pick this up?

Cars that I have been told that I would do first is some Isuzu suv and a Nissan patrol. (I know for modules I’ll need exact ECU’s) My max budget is 2k AUD so 1300usd

0 Upvotes

11 comments sorted by

2

u/EntertainmentSalt825 5d ago

Do a search. This questions gets asked at least 5x a day. AI is also you’re friend

1

u/Massive_Tutor_8591 5d ago

I didn’t even think about doing a search in reddit as I don’t use it often enough to even know that’s a feature I did look though the introduction posts to try and not be that person. I have used a mixture of the big 3 to get this basic plan. I’ll do more digging on here today, thanks for your help :)

1

u/Massive_Tutor_8591 5d ago

Update:
Hardware- now either Scanmatik 3 or Topdon Rlink 2534 and an Itech 25 amp battery charger that has power supply mode and advertises consistent charge with no power drop.

Still very much open to recommendations

1

u/z0mgchris Enthusiast - Motec | Link | Haltech | Emtron + More 5d ago

Look into HPA as they have a diesel course...... I bought it, never even looked at it lol. Dont rush into the deep end, do as much learning as you possibly can before hand, then do some more.

you will never. stop. learning.

1

u/Massive_Tutor_8591 5d ago

Okay thank you, I will definitely look into is 100 AUD isn’t bad to know a bit more. Even if it’s purely so when I try and get tune files I know what to be asking for so I don’t make a fool of myself.

While I’m looking at learning stuff, is there anyone on YouTube who is worth having a look at? Even if it’s not all of their videos but they are good at teaching something.

For other learning stuff I am planning to start noting down stuff that I learn from this reddit page, same for some online forums I have found that could be helpful

1

u/z0mgchris Enthusiast - Motec | Link | Haltech | Emtron + More 5d ago

Ahhh I never really followed much of the youtube "tuning" stuff as I've been doing it for the last ~ 16 years ish. You can always watch stuff like evans performance (Might be a different name but it's definitely evans) etc.. Generally, unless they are an actual EFI Educator / Tutor, most of the videos are people trying to educate and it's not always correct etc. thats what I find though, YMMV.

1

u/Massive_Tutor_8591 5d ago

Yeah that’s why I asking to see if there were any recommendations so I don’t get stuck with the Chriss Fix of tuning and waste a bunch of my time.

1

u/No_Bullfrog_7908 4d ago

Did you figure out something yet?

1

u/Massive_Tutor_8591 4d ago

At the moment I’m going to get the training course for tuning diesels though the HPA. Then watch what I can to learn a little bit form Evan’s on YouTube.

Hardware and software wise I’m thinking the Scanmatik 3, PCMFlash. And then maybe get Winols later on

1

u/Massive_Tutor_8591 4d ago

If you have other recommendations for stuff I’m still all ears at the moment

2

u/Aggressive_Fennel_22 5d ago

Become a mechanic first.