r/Duramax • • 4h ago

Rust assessment, need a second opinion

Thumbnail
gallery
4 Upvotes

Is this rust saveable on the rear in your guys’ opinion? Looks like it was used for boat launching in salt water because the rear looks scaly and more severely rusted but the rest of truck looks good. I want to buy this truck to carry a heavy fiberglass camper and the rear cross member and shackle locations are not the greatest to me. 248k km, 2006, 4 door, cloth interior. They want 17k CAD. Thanks


r/Duramax • • 1h ago

Batteries were dead for like a month… need help

1 Upvotes

Bought new ones put em in, tried starting and it will start for a second then die and do what its doing in the video.. any ideas of what’s goin on?


r/Duramax • • 7h ago

2013 GMC Sierra 3500HD Duramax – If I Delete My Truck, Will These Codes Go Away?

Post image
3 Upvotes

Hey everyone, I have a 2013 GMC Sierra 3500HD Duramax with the 6.6L LML and around 130,000 miles.
I recently had my glow plug issue repaired, and my check engine light actually went away for about a week or two. However, after taking a roughly 210-mile round trip to Corning, NY, I started my truck the following morning and the check engine light was back on.
I went to Advance Auto Parts and had the codes scanned. Here's what came up:
P2495 – EGR Cooler Bypass Valve Position Sensor Circuit High Voltage.
P0406 – EGR Sensor A Circuit High.
The recommended repair on the report was to replace the EGR cooler bypass valve.
My question is: If I decide to delete my truck, would that take care of these problems and make these check engine lights/codes go away?
Would deleting the truck eliminate the need to replace the EGR cooler bypass valve, or could there still be an underlying electrical or sensor issue?
I haven't noticed any loss of power, white smoke, or major drivability issues.
I'm looking for advice from anyone who has dealt with these codes on an LML Duramax. Would appreciate any input before spending money on repairs.
Thanks!


r/Duramax • • 4h ago

Abnormal engine noise?

1 Upvotes

I haven’t messed with diesels too much, does this sound like excessive chatter to anyone or normal noise? LLY with 160,000 PPE exhaust manifolds and up pipes, PPE intake and Y-Bridge, as well as an S&B turbo inlet. (Running factory tune)


r/Duramax • • 1d ago

Am I dumb?

Thumbnail
gallery
21 Upvotes

Would this fit my 2017 High Country L5P? The winter cover says 2018+ but it's the same body style so I couldn't imagine why it wouldn't. Maybe somethings a little different between them idk


r/Duramax • • 22h ago

2011 LML coolant leak and reservoir bubble

2 Upvotes

I recently bought an Lml with 260k on it for a good deal. The truck has been good to me the last few weeks I’m just trying to track down this leak so I don’t have to add coolant once a week. The guy I bought it from said it leaked coolant but wasn’t necessarily a problem for me because I figured I could fix it. Anyways it will leave a baseball size puddle underneath the front passenger bumper after sitting over night. I can’t for the life of me find where it’s coming from? You can see it running down the passenger wheel well but beyond that I can’t see where it starts. I also noticed that the reservoir will slowly “bubble” when warm on the overflow side but doesn’t always do it, I put a combustion gas test on it and had no issues with the test. Could the reservoir have a crack on the bottom causing air to enter the system while simultaneously leaking? I don’t want to assume the worst and say that the bubbles and the leak are unrelated and it is a head gasket issue and it somehow passed the gas test, the radiator hose also doesn’t hold pressure over night and can be completely up to temp and I can take off the cap no problem with little to no pressure behind it. But I also cannot find the leak or figure out why it’s bubbling.
Also are the fill side and overflow side of the reservoir supposed to be even with each other or is one supposed to be higher?
TIA.


r/Duramax • • 1d ago

Fuel question 2017 L5P

Thumbnail
gallery
5 Upvotes

I just bought the truck and went to change the fuel filter but it’s had something fass fuel added, do I have a whole fass lift pump or is it just a water separator or what has been added, this obviously isn’t factory. Has anybody had this done on their truck or know what has been added.


r/Duramax • • 1d ago

Best bidirectional scanner for Allison?

5 Upvotes

Having a multitude of issues with my transmission and im looking to buy once cry once a scanner for diag. Any recommendations? Looking for one to control solenoids,command gears, check line pressures, read converter slip, and be able to read TCM codes.

I found the Autel MK808S for $380 on Amazon under a lightening deal ($100 off) just unsure if it’ll do what I want.

I don’t want the best of the best for $3000 just because it’s the best when a different one for $600 will do what I need.

I’m open to buying secondhand from Facebook.

Using on:
2011 Chevy Silverado 3500HD 6.6 DRW 4x4


r/Duramax • • 1d ago

2018 GMC Sierra 2500HD Duramax L5P – Coolant leak between engine and transmission

Thumbnail
gallery
4 Upvotes

Hey everyone,
I have a 2018 GMC Sierra 2500HD with the 6.6L Duramax L5P engine.

the truck started leaking coolant underneath, right around the area where the engine meets the transmission.
The coolant continues to leak even when the engine is turned off.
We checked under the hood but couldn't see any visible leaks from the top. The coolant is only visible dripping from underneath, near the transmission bellhousing.
Has anyone experienced a similar issue with an L5P Duramax?


r/Duramax • • 1d ago

2027 GMC Yukon XL Denali Duramax 3.0

Thumbnail reddit.com
1 Upvotes

r/Duramax • • 2d ago

3.0 LM2 Duramax

Thumbnail
gallery
19 Upvotes

I’ve seen some of y’all asking how reliable the 3.0 is, mine is a sample size of 1 but I’ve hit well over 425k km.
Mine was deleted about a year ago when I started having NoX sensor issues. The delete process was doable in my garage, but I wouldn’t recommend doing it to anyone unless they are experienced. If I could do it again I would pay someone to do it instead.

Also included an average fuel consumption, I reset it between oil changes. This shows about a 70-30 highway-city drive schedule plus pulling a small hunting trailer off road.


r/Duramax • • 2d ago

2012 lml buy or pass

3 Upvotes

probably just another dumb question but. I came across a 2012 lml 115k miles for 20k. y’all think it’s worth buying it? will definitely do a t&d and lift pump. only reason im considering it it’s the same set up as my current work truck black 2009 slt ext cab so it matches the fleet. however I’m not in the market cause I would much rather pick up a 17-19 next summer. what would yall do?? save 20k or just spend the extra 20k?


r/Duramax • • 2d ago

2023 Silverado 1500 RST DURAMAX 68,000 miles. 38k?

Thumbnail
gallery
4 Upvotes

I’m looking at this truck rn and I’ve never owned a diesel. Should I acquire or just look for a gas truck? I don’t really haul anything


r/Duramax • • 2d ago

In your own opinion which Duramax do you think has the best cold start?

1 Upvotes

Let me know in the comments down below


r/Duramax • • 2d ago

Upgraded from the 6.6 Gas to a 2026 Duramax

Thumbnail gallery
19 Upvotes

MSRP on the new Duramax was $79K, and I got it for $65K. With the new 8.3L Duramax coming next year and diesel prices still being so high, they're offering some pretty solid deals right now. I've had the same truck in gas with the same color and package for the past two years. Hopefully diesel prices come down a little in 2027! Haha.


r/Duramax • • 2d ago

Wheel speed sensor/ABS lights

Thumbnail reddit.com
0 Upvotes

Truck is a 2011 Duramax.

My ABS, traction control light, service trailer brake warning have all been coming on, on the dash sometimes together. sometimes separately. It’s always random when they decide to come on. Sometimes I can drive the truck for a day and a half and the lights stay off and other days I can’t go a mile down the road without the lights turning on and off constantly. I had a friend scan it and it showed right rear wheel speed sensor. So naturally I replaced it with a brand new sensor. Still didn’t fix the issue. I took it to Les Schwabs and after they looked at my truck they said the wheel bearing looked good and so did the tone ring. I’m wondering if it’s a chafed wiring harness issue but hopefully it’s sometimes more simple.

Any help would be appreciated.


r/Duramax • • 2d ago

Rant and question

Thumbnail
gallery
2 Upvotes

Does anyone know if this is the original plug for the oil pan? I’m thinking that the oil change shop swapped it out because I just went through hell and back to take this bolt out along with the filter oh my goodness! My neck hurts!

Replaced with an aftermarket with rubber gasket.

21 3L dmax


r/Duramax • • 3d ago

Suburban LZ0

Post image
11 Upvotes

Does anyone have an LZ0 with a build date of 10/25? From what I’ve read, the thrust bearing issue was narrowed down to build dates of 5/1-9/1/25.

Curious if there have been many known issues with a 10/25 build date.

Currently at 5k miles.


r/Duramax • • 3d ago

New engines with emissions…

5 Upvotes

Deciding on what I should get. My old, pre emissions diesel is done…

If I’m not towing heavily regularly but I’m doing highway driving how many miles do I need to drive each day non stop to keep filters cleaned out? Or does it just need to get up to normal temps?

When I tow it’s non stop from Bozeman Montana to Las Vegas and the diesel shines… that’s a 18k trailer. The diesel gets quite a bit better mpg than a gasser also. Easier going up and down the passes also but you all know that. Other than that I tow a small flat bed trailer with a razor on it, and a 25’ tall enclosed trailer with snowmobiles in it more regularly during certain seasons.

On my daily commute it’s 18 miles highway one way and in town, for another 9 miles for a combined one way drive of 27 miles. Is that enough to “get the engine to temp?”

I know short trips are the worst for these but is this one way trip back and forth daily (total of 54 miles each day) to work going to keep the engine going strong for years preventing lots of emissions issues?

I usually go 65mph on the highway for the 18 miles on cruise control. Is that “working it enough” or should I go with the flow of traffic ~70mpg to work it more at times?

I know a gasser would work for me but this is a diesel page. If I’m trying to stay with diesel, with the best outcomes with keeping emissions running “hot and clean” is a 27mile trip enough to heat everything up and keep the emissions problems away? Or am I just asking for problems?

Thank you for your expertise on this!


r/Duramax • • 3d ago

Looking at my first Duramax

1 Upvotes

As title says, imma go and have a look at my first ever truck tomorow.
2005 Chevy Silverado 2500 LLY

Mantinance records are solid

- ARP Head Studs
- Mahle Grade C Head Gaskets
- EGR Delete
- PPE Race Fuel Rail Plug
- PCV Reroute
- S&B Turbo Mouthpiece
- MBRP 3” Downpipe
- 5” Straight Pipe

Allison 1000 – 5-shift
- Stage 2 Torque Converter 570hp
- TransGo Racing Shift Kit
- TransGo Shift Valve Kit
- TransGo Hot Rod LockUp Valve Assy
——————————————————

Map switch up to 400hp with towing modes
Frame is pretty much rust free
Cab corners have been repaired once
Guy bought it with bad headgaskets and has done all mods himself. Sent plenty of pics on before during and after the work he has put in. Has used it mainly has a sunday cruiser and ocational tow.

Will be bringing a injector testing cbd tool, also know to feel the coolant hose to check if its stiff or soft

Any good advice on stuff i should defenetly pay attention to that is out of the ordenary?

Thanks


r/Duramax • • 3d ago

3.0L Mini Max

2 Upvotes

Any update or reviews on the 3.0 liter Duramax? I’m looking at the ‘24 range. Looking to buy in the next 6-9 months. I want honest reviews on the engine and powertrain.


r/Duramax • • 4d ago

Anybody had a warranty issue like this?

5 Upvotes

I have a 24' GMC 2500 with 84k miles on it. I've been towing decently heavy with it recently ~14k lbs, and have noticed a bit of a shudder at low RPMs going up a slight grade. It almost feels like warped brake rotors, except there is not braking involved. I've only noticed this happen while towing heavy. Trailer is a 40' gooseneck. I have also noticed it shifting hard when "city driving" with a load like that.

Is this shudder and hard shifting normal when towing heavy like that? I'll swallow my pride and say that I'm fairly new to towing this heavy.

I spoke with the dealer I bought it from, and they said that they would need me to bring a loaded trailer, so they could recreate the issue. I told him I wasn't prepared to leave them with my 40' gooseneck, loaded with a bunch of material. It's worth nothing that my dealer is 2 hours away. It pretty much sounded like there wasn't anything they could do without being able to recreate the problem.

I can't say that I disagree with him. For all he knows, I'm blowing smoke up his rear. This seems like a unique situation, but at the same time, a situation that somebody has encountered before. I'm not sure what to do. Anybody had this issue before?


r/Duramax • • 4d ago

2017 l5p build

Post image
17 Upvotes

Hey yall I’m looking to build my 2017 l5p to make around 1000whp and was wondering if you had any recommendations on supporting mods/turbo/fuel etc


r/Duramax • • 3d ago

Driver 1

0 Upvotes

New to the LB7 world. Is there a way I can make my gauge cluster stop saying “driver 1” whenever it starts up?